1、ICS 23.040.10; 77.140.75Welded steel tubes for pressure purposes Technical delivery conditionsPart 5: Submerged arc welded non-alloy and alloy steel tubeswith specified elevated temperature properties(includes Amendment A1:2005)English version of DIN EN 10217-5:2002 + A1:2005Geschweite Stahlrohre fr
2、 Druckbeanspruchungen Technische Lieferbedingungen Teil 5: Unterpulver-geschweite Rohre aus unlegierten und legierten Sthlen mit festgelegten Eigenschaften bei erhhtenTemperaturen (enthlt nderung A1:2005)A comma is used as the decimal marker.National forewordThis standard has been prepared by ECISS/
3、TC 29 Steel tubes and fittings for steel tubes (Secretariat: Italy).The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steeland Iron Standards Committee), Technical Committee Rohre aus warmfesten oder kaltzhen Sthlen.DIN V 17006-100 is the standard corre
4、sponding to CEN Technical Report CR 10260 referred to in clause 2of the EN.AmendmentsThis standard differs from the August 2002 edition in that more detailed specifications regarding inspectionhave been given and Annex ZA has been revised.Previous editionDIN EN 10217-5: 2002-08.National Annex NAStan
5、dard referred to(and not included in Normative references and Bibliography)DIN V 17006-100 Designation systems for steel Additional symbols for steel namesDEUTSCHE NORM April 2005DIN EN 10217-5 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normun
6、g e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).SupersedesAugust 2002 edition.English price group 15www.din.dewww.beuth.de9637704Continued overleaf.Document comprises 34 pages.06.05English versionICS 23.040.10; 77.140.75 Supe
7、rsedes EN 10217-5:2002.Welded steel tubes for pressure purposes Technical delivery conditionsPart 5: Submerged arc welded non-alloy and alloy steel tubeswith specified elevated temperature properties(includes Amendment A1:2005) 2005. CEN All rights of exploitation in any form and by any meansreserve
8、d worldwide for CEN national members.Ref. No. EN 10217-5:2002 + A1:2005 EGeschweite Stahlrohre fr Druckbe-anspruchungen Technische Liefer-bedingungen Teil 5: Unterpulverge-schweite Rohre aus unlegierten undlegierten Sthlen mit festgelegten Ei-genschaften bei erhhten Temperatu-ren (enthlt nderung A1:
9、2005)This European Standard was approved by CEN on 2002-04-25 and AmendmentA1 on 2004-12-09.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lis
10、ts and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibi
11、lity of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Ital
12、y, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.Management Centre: 36, rue de Stassart, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr N
13、ormungTubes souds en acier pour servicesous pression Conditions techni-ques de livraison Partie 5: Tubessouds larc immerg en acier alli etnon alli avec caractristiques spci-fies temprature leve (amende-ment A1:2005 inclus)EN 10217-5January 2005+A1May 2002Page 2EN 10217-5:2002 + A1:2005ContentsPageFo
14、reword to EN 10217-5:2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Foreword to EN 10217-5:2002/A1:2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
15、1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16、. . . . . . . . . . . . . . 43 Terms and definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、. . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Classification and designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.1 Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.2 Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Information to be supplied by the purchaser . . . . . .
19、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66.1 Mandatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66.2 Options . . . . . . . . . . . . . . . . . . . . . . .
20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76.3 Example of an order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Manufacturing process . .
21、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.1 Steelmaking process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.2 Deoxidat
22、ion process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.3 Tube manufacture and delivery conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Require
23、ments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24、 . . . . . . . . . . . 98.2 Chemical composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.3 Mechanical properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25、. . . . . . . . . . . . . . . . . . . 118.4 Appearance and internal soundness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138.5 Straightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26、 . . . . . . . . . . . . . . . . . . . . . . . . 148.6 Preparation of ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148.7 Dimensions, masses and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . .
27、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179.1 Type of inspection . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179.2 Inspection documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189.3 Summary of inspection and testing . . . . . . . . . .
29、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1810 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1910.1 Frequency of tests . . . . . . . . . .
30、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1910.2 Preparation of samples and test pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011 Test methods . . . . . . . . . . .
31、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.1 Chemical analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.2 Tensile te
32、st on the base material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.3 Transverse tensile test on the weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.4 Weld bend
33、test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.5 Impact test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34、. . . . . 2211.6 Hydrostatic leak-tighness test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2311.7 Dimensional inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35、. . . . . . . . . 2311.8 Visual examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2311.9 Non-destructive testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36、 . . . . . . . . . . . . . . . . . 2311.10 Material identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2411.11 Retests, sorting and reprocessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37、 . . . . . . . . . . . . . . . . . . . . 2412 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2412.1 Marking to be applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2412.2 Additional marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2513 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Annex A (normative) Qualification of welding procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Annex ZA (informative) Relationship between this European Standard and the E
40、ssentialRequirements of 97/23/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Page 3EN 1
41、0217-5:2002 + A1:2005Foreword to EN 10217-5:2002This European Standard has been prepared by Technical Committee ECISS/TC 29 Steel tubes and fittings forsteel tubes, the Secretariat of which is held by UNI.This European Standard has been prepared under a mandate given to CEN by the European Commissio
42、n andthe European Free Trade Association, and supports essential requirements of the relevant EU Directive.For relationship with this directive, see Annex ZA.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conf
43、licting national standards withdrawn, by November 2002 at the latest.Other parts of EN 10217 are:Part 1: Non-alloy steel tubes with specified room temperature propertiesPart 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesPart 3: Alloy fine grain stee
44、l tubesPart 4: Electric welded non-alloy steel tubes with specified low temperature propertiesPart 6: Submerged arc welded non-alloy steel tubes with specified low temperature propertiesPart 7: Stainless steel tubesAnother European Standard series covering tubes for pressure purposes is:EN 10216 Sea
45、mless steel tubes for pressure purposes.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ir
46、eland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Foreword to EN 10217-5:2002/A1:2005This amendment to EN 10217-5:2002 has been prepared by Technical Committee ECISS/TC 29 Steel tubesand fittings for steel tubes, the Secretariat of
47、which is held by UNI.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports essential requirements of the relevant EU Directive.For relationship with this directive, see Annex ZA.This amendment shall be gi
48、ven the status of a national standard, either by publication of an identical text or byendorsement, and conflicting national standards withdrawn, by July 2005 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are b
49、ound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Page 4EN 10217-5:2002 + A1:2005Page 5EN 10217-5:2002 + A1:2005Page 6EN 10217-5:2002 + A1:20055 Classification and designationPage 7EN 10217-5:2002 + A1:2005Page 8EN 10217-5:2002 + A1:2005Page 9EN 10217-5:2002
