1、July 2010 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 8
2、5.100!$is“1708058www.din.deDDIN EN 1034-14Safety of machinery Safety requirements for the design and construction of paper makingand finishing machines Part 14: Reel splitter (includes Amendment A1:2009)English translation of DIN EN 1034-14:2010-07Sicherheit von Maschinen Sicherheitstechnische Anfor
3、derungen an Konstruktion und Bau von Maschinen derPapierherstellung und Ausrstung Teil 14: Rollenspaltmaschinen (enthlt nderung A1:2009)Englische bersetzung von DIN EN 1034-14:2010-07Scurit des machines Prescriptions de scurit pour la conception et la construction de machines de fabricationet de fin
4、ition du papier Partie 14: Cisailles bobine (Amendement A1:2009 inclus)Traduction anglaise de DIN EN 1034-14:2010-07SupersedesDIN EN 1034-14:2006-02See start of validitywww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 18 pages07.10 DIN E
5、N 1034-14:2010-07 A comma is used as the decimal marker. Start of validity This standard takes effect on 1 July 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 198 “Printing and paper machinery Safety” (Secretariat: DI
6、N, Germany). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-23-01 AA Druck- und Papier-maschinen of Section Druck- und Papiermaschinen. Representatives of manufacturers of paper makin
7、g and finishing machines, and of the employers liability insurance association for papermakers contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 December 2009) an
8、d the new “Machinery Directive”, Directive 2006/42/EC, which took effect on 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive
9、s. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to
10、in this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 1034-14:2006-02 as follows: a) The standard has been brought in line with the new Machinery Directive 2006/42/EC. b) An informative Annex ZB dea
11、ling with the relationship between this European Standard and the essential requirements of EU Directive 2006/42/EC has been included. Previous editions DIN EN 1034-14: 2006-02 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1034-14:2005+A1 December 2009 ICS 85.100 Supersedes EN 1034-14:2005E
12、nglish Version Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter Scurit des machines - Prescriptions de scurit pour la conception et la construction de machines de fabrication et de finition du papier - Partie 14
13、: Cisailles bobine Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrstung - Teil 14: Rollenspaltmaschinen This European Standard was approved by CEN on 5 October 2005 and includes Amendment 1 approved by CEN on 17 Nove
14、mber 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be ob
15、tained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Mana
16、gement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No
17、rway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any for
18、m and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-14:2005+A1:2009: EEN 1034-14:2005+A1:2009 (E) 2 Contents Page Foreword 3Introduction .41 Scope 42 Normative references 43 Terms and definitions .64 List of significant hazards 75 Safety requirements and/or measures 85.1
19、 General 85.2 Loading .95.3 Danger zone of the splitting/cutting device including access to the conveyor belts 95.4 Reel splitters for pulpers . 115.5 Start-up warning device . 115.6 Emergency stop devices 115.7 Equipment for make-ready and maintenance 115.8 Safety measures for cleaning operations 1
20、25.9 Workplaces, access stairs, catwalks, passageways . 125.10 Noise 125.11 Isolation and energy dissipation, prevention of unexpected start-up 125.12 Ergonomic aspects . 125.13 Control systems and actuators . 125.14 Integrated lighting. 135.15 Electrical equipment . 135.16 Hydraulic equipment 135.1
21、7 Pneumatic equipment 136 Verification of safety requirements and/or measures . 137 Information for use . 13Requirements of EU Directive 93/87/EC . 15!Requirements of EU Directive 2006/42/EC“ 16Figures Figure 1 Example of a rell splitter with conveyor belts and pivoting platform . 6 Tables Table 1 L
22、ist of significant hazards 8 Table 2 Methods used to verify safety requirements and/or measures 13 DIN EN 1034-14:2010-07 Annex ZA (informative) Relationship between this European Standard and the Essential Annex ZB (informative) Relationship between this European Standard and the Essential EN 1034-
23、14:2005+A1:2009 (E) 3 Foreword This document (EN 1034-14:2005+A1:2009) has been prepared by Technical Committee CEN/TC 198 “Printing and paper machinery - Safety”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an ide
24、ntical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held resp
25、onsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 17 November 2009. This document supersedes EN 1034-14:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !This document has been prepa
26、red under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENE
27、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
28、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 1034-14:2010-07 EN 1034-14:2005+A1:2009 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the e
29、xtent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European Standard. For machines that have been designed and built according to the provisions of this C standard, the following stipulation applies: When provisions of this type C standar
30、d are different from those which are stated in type B standards or from provisions made in !EN 1034-1:2000+A1:2010“, the provisions of this type C standard take precedence over the provisions of the other standards. 1 Scope This European Standard applies to reel splitters intended for use in paper m
31、aking and shall be used together with !EN 1034-1:2000+A1:2010“. It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4).
32、This European Standard applies only to reel splitters with a movable knife and of the following designs: machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off;
33、 machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other. This European Standard also applies to the integrated conveyor belts and the
34、 integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4. This European Standard is not applicable to reel split
35、ters which are manufactured before the date of publication of this EN. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the re
36、ferenced document (including any amendments) applies. EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs. EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body. EN 418:1992, Safety of machinery Emergency sto
37、p equipment Functional aspects Principles for design. DIN EN 1034-14:2010-07 EN 1034-14:2005+A1:2009 (E) 5 EN 574:1996, Safety of machinery Two-hand controls, functional aspects, principles for design. EN 619:2002, Continuous conveyors and systems Safety and EMC requirements for mechanical conveying
38、 systems for packaged goods. EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards. EN 954-1:1997, Safety of machinery Safety related parts of control systems Part 1: General principles for design. EN 982:1996, Safety of machinery Sa
39、fety requirements for fluid power systems and their components Hydraulics. EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics. EN 999:1998, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts for
40、 the human body. !EN 1034-1:2000+A1:2010“, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 1: Common requirements. EN 1034-4:2005, Safety of machinery Safety requirements for the design and construction of paper making and finishing
41、 machines Part 4: Pulpers and their loading facilities. EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection. EN 1760-1:1997, Safety of machinery Pressure-sensitive safety devices Part 1: General principles for the design and testing of pr
42、essure-sensitive mats and pressure-sensitive floors. EN 1760-2:2001, Safety of machinery Pressure-sensitive safety devices Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars. EN 1837:1999, Safety of machinery Intergal lighting of machines. E
43、N 13023:2003, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy categories 2 and 3. EN 60204-1:1997, Safety of machinery Electrical equipment Part 1: General requirements (IEC 60204-1:1997). EN 60529:1991, Degrees of protection provided
44、by enclosures (IP Code) (IEC 60529:1989). EN 61000-6-2:2001, Electromagnetic compatibility (EMC) Part 6-2: Generic standard Immunity Part 2: Industrial environment (IEC 61000-6-2:1999, modified). EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements
45、 and tests (IEC 61496-1:2004, modified). prEN 61496-2:1997, Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:1997, modified). EN ISO12100-1:2003, Safety of machinery Basic con
46、cepts General principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003). DIN EN 1034-14:2010-07 EN 1034-14:2005+A1:2009 (E) 6 EN ISO 12100-2:2003, Safety of machinery Basic concepts General principles for design - Part 2: Technical principles and specifications (ISO 12100-2:200
47、3). 3 Terms and definitions For the purpose of this European Standard, the definitions given in !EN 1034-1:2000+A1:2010“, EN ISO 12100-1:2003 and the following terms and definitions apply: 3.1 reel splitter machine used for splitting waste paper reels or reel cores with a power-driven knife in a pla
48、ne running through the reel axis. Figure 1 illustrates an example of this NOTE Safety devices are not shown Key 1 Pivoting platform 2 Splitting/cutting device 3 Conveyor belt Figure 1 Example of a rell splitter with conveyor belts and pivoting platform 3.2 knife bar moving bar in the machine frame t
49、hat secures and guides the knife 3.3 reel bed part of the machine on which the reel lies for splitting/cutting DIN EN 1034-14:2010-07 EN 1034-14:2005+A1:2009 (E) 7 3.4 pivoting platform hydraulically or pneumatically driven device with which the reel is raised and guided to the integrated conveyor belt or reel bed 3.5 conveyor belt continuous con
