1、March 2014 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、71.100.50!%,hl“2096973www.din.deDDIN EN 118Wood preservatives Determination of preventive action against Reticulitermes species(European termites) (Laboratory method);English version EN 118:2013,English translation of DIN EN 118:2014-03Holzschutzmittel Bestimmung der vorbeugenden Wirkung gegenber Re
3、ticulitermes-Arten (EuropischeTermiten) (Laboratoriumsverfahren);Englische Fassung EN 118:2013,Englische bersetzung von DIN EN 118:2014-03Produits de prservation des bois Dtermination de laction prventive contre les espces de Reticulitermes (termiteseuropens) (Mthode de laboratoire);Version anglaise
4、 EN 118:2013,Traduction anglaise de DIN EN 118:2014-03SupersedesDIN EN 118:2005-06www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 20 pages 01.14 DIN EN 118:2014-03 2 A comma is used as the decimal marker. National foreword This document
5、 (EN 118:2013) has been prepared by Technical Committee CEN/TC 38 “Durability of wood and wood-based products” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), Working Com
6、mittee NA 042-03-06 AA Dauerhaftigkeit von Holz und Holzprodukten. The DIN Standard corresponding to the International Standard referred to in this document is as follows: EN ISO 3696 DIN ISO 3696 Amendments This standard differs from DIN EN 118:2005-06 as follows: a) in Subclause 7.5 “Number and di
7、stribution of test specimens”, test specimens treated with the product free of active ingredients have been deleted; b) in Subclause 8.3.1 “Exposure”, specifications to allow the termination of the test have been included; c) Table A.1 “Results of product KWG organic oily solution” has been revised.
8、 Previous editions DIN EN 118: 1982-08, 1986-10, 1991-02, 2005-06 National Annex NA (informative) Bibliography DIN ISO 3696, Water for analytical laboratory use Specification and test methods EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 118 November 2013 ICS 71.100.50 Supersedes EN 118:2005E
9、nglish Version Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)Produits de prservation des bois - Dtermination de laction prventive contre les espces de Reticulitermes (termites europens) (Mthode de laboratoire) Holzschutz
10、mittel - Bestimmung der vorbeugenden Wirkung gegenber Reticulitermes-Arten (Europische Termiten) (Laboratoriumsverfahren) This European Standard was approved by CEN on 22 September 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi
11、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offi
12、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of
13、 Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
14、Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide fo
15、r CEN national Members. Ref. No. EN 118:2013 EEN 118:2013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative reference 5 3 Terms and definitions .5 4 Principle 5 5 Test materials .6 6 Sampling .7 7 Test specimens 7 8 Procedure .8 9 Expression of results . 13 10 Test report . 13 Ann
16、ex A (informative) Example of a test report 14 Annex B (informative) Example of a method of culturing termites . 16 Annex C (informative) Environmental, health and safety precautions within chemical/biological laboratory 17 Bibliography . 18 DIN EN 118:2014-03 EN 118:2013 (E) 3 Foreword This documen
17、t (EN 118:2013) has been prepared by Technical Committee CEN/TC 38 “Durability of wood and derived materials”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late
18、st by May 2014, and conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pate
19、nt rights. This document supersedes EN 118:2005. Significant technical differences between this document and EN 118:2005 are as follows: deletion of the need to test specimens treated with the product free of active ingredients. According to the CEN-CENELEC Internal Regulations, the national standar
20、ds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
21、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 118:2014-03 EN 118:2013 (E) 4 Introduction This document describes a laboratory method of testing which gives a basis for assessment of the effectivene
22、ss of a wood preservative, when applied as a surface treatment, against the Reticulitermes species of European termites. This laboratory method provides one criterion by which the value of a product can be assessed. It is further recommended that results from this test should be supplemented by thos
23、e from other appropriate tests, and above all by comparison with practical experience. When products which are very active at low concentrations are used it is very important to take suitable precautions to isolate and separate, as far as possible, operations involving chemical products, other produ
24、cts, treated wood, laboratory apparatus and clothing. Suitable precautions should include the use of separate rooms, areas within rooms, extraction facilities, conditioning chambers and special training for personnel (see also Annex C for environmental, health and safety precautions). DIN EN 118:201
25、4-03 EN 118:2013 (E) 5 1 Scope This European Standard specifies a method for the determination of the preventive action of a wood preservative against the Reticulitermes species of European termites1)when the preservative is applied as a surface treatment to wood. This method is applicable to: water
26、-insoluble chemicals which are being studied as active ingredients; organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates; organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; and water-soluble mater
27、ials, for example salts. NOTE This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84. 2 Normative reference The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,
28、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 3696, Water for analytical laboratory use Specification and test methods (ISO 3696) 3 Terms and definitions For the purposes of this document, the followin
29、g terms and definitions apply. 3.1 representative sample sample having its physical or chemical characteristics identical to the volumetric average characteristics of the total volume being sampled 3.2 supplier sponsor of the test (person or company providing the sample of wood preservative to be te
30、sted) 4 Principle Surface treatment of test specimens of a susceptible wood species with the preservative or, if a concentrate is being used, with known dilutions of the preservative. 1) This method can be applied not only to different species of Reticulitermes, but also to other species of the fami
31、ly Rhinotermitidae, where necessary adapting the temperature and humidity conditions and the assessment of attack to the specific behaviour of the species concerned. DINEN 118:2014-03EN 118:2013 (E) 6 Exposure of these test specimens to specified colonies of European Reticulitermes2)species and asse
32、ssment of the attack suffered after exposure under fixed conditions and over a fixed period. Comparison of these results with those obtained from untreated and solvent or diluent-treated control test specimens. 5 Test materials 5.1 Biological material Workers, soldiers and nymphs of an identified te
33、rmite species of Reticulitermes. The termite species and the locality of origin should be stated in the test report and their identification should be proved. The termites should be obtained from colonies reared as described in Annex B. 5.2 Products and reagents 5.2.1 Substrate for establishing the
34、colonies. A choice of: 5.2.1.1 Fine white quartz sand consisting of grains of crystallized silica, very pure (99,5 % silica), and free from any organic substances3). 5.2.1.2 An hydrated, laminar, aluminium-iron-magnesium silicate exfoliated to give particles of 1 mm to 3 mm with an apparent density
35、of 80 kg/ m3to 90 kg/ m3. Particles of less than 1 mm shall be eliminated by sieving prior to use, to ensure the absence of free water and prevent any significant agglomeration of the particles. 5.2.2 Adhesive, which cannot be attacked by the termites and is non-toxic, for securing the tubes. This a
36、dhesive shall also not react with the preservative applied to the wood. 5.2.3 Sealant 5.2.3.1 Paraffin wax, setting point of 52 C to 54 C, for sealing the relevant surfaces of test specimens to be treated with solutions in which water is the continuous phase. 5.2.3.2 Gelatine, for sealing the releva
37、nt surfaces of test specimens to be treated with solutions in which an organic solvent is the continuous phase. 5.2.3.3 Inert adhesive, for sealing the relevant surfaces of test specimens to be treated with other solutions in which e.g. an emulsion solvent is the continuous phase. 5.2.4 Water, compl
38、ying with grade 3 of EN ISO 3696. 5.2.5 Solvent or diluent. A suitable volatile liquid that will dissolve or dilute the preservative but does not leave a residue in the wood which would have a toxic effect on the insect at the end of the conditioning period. 5.3 Apparatus 5.3.1 Culturing chamber, wi
39、th air circulation, controlled at (26 2) C and a minimum relative humidity of (70 5) %. 2) In providing biological validation of individual species, it is essential that the locality of origin of each test termite species is given. The description of the locality should at least include the district
40、 name. 3) In France, Fontainebleau sand, of which more than 97 % of the particles are between 75 m and 300 m in size, meets these requirements. DINEN 118:2014-03EN 118:2013 (E) 7 5.3.2 Conditioning chamber, well ventilated, controlled at (20 2) C and relative humidity (65 5) %4). 5.3.3 Laboratory wo
41、rk area, well ventilated, where treatment of the test specimens is carried out5). 5.3.4 Testing chamber, protected from light, ventilated and controlled at (26 2) C and at a minimum relative humidity of (70 5) %. 5.3.5 Ordinary laboratory equipment for application by brushing or by pipette of a liqu
42、id preservative product and including an analytical balance capable of weighing to an accuracy of 0,01 g. 5.3.6 Protective gloves 5.3.7 Instruments adapted for termite manipulation (aspirator, forceps). 5.3.8 Glass tubes open at both ends, one end being ground: interior diameter: 25 mm; length: 110
43、mm. 6 Sampling The sample of preservative shall be representative of the product to be tested. Samples should be stored and handled in accordance with any written recommendations from the supplier. For the sampling of preservatives from bulk supplies, the procedure given in EN 212 should be used. 7
44、Test specimens 7.1 Species of wood The reference species is Scots pine (Pinus sylvestris Linnaeus). Additional tests can be made with other timber species but, if so, this should be stated in the test report. 7.2 Wood quality The wood shall be free from visible cracks, stain, decay, insect damage an
45、d other defects. The wood shall not have been water-stored, floated, chemically treated or steamed. The wood shall originate from trees preferably felled in winter. Wood that has been kiln dried at temperatures below 60 C may be used. The wood shall be exclusively sapwood containing little resin and
46、 having between 2,5 annual rings per 10 mm and eight annual rings per 10 mm. The proportion of latewood in the annual rings shall not exceed 30 % of the whole. It is recommended to use test specimens of similar growth rate within a single test. 4) The conditioning of test specimens after treatment i
47、s permissible in the laboratory work area (5.3.3) provided that this meets the conditions specified for the conditioning chamber (5.3.2). 5) It is essential to follow proper safety measures for handling flammable or toxic material. It is essential that operators avoid excessive exposure to solvents
48、or their vapours. DINEN 118:2014-03EN 118:2013 (E) 8 7.3 Provision of test specimens Prepare planed strips with a fine-sawn finish and having a cross-section of (50 0,5) mm x (10 0,5) mm removing a minimum of 2 mm from any surfaces exposed during drying. The longitudinal faces shall be parallel to the direction of the grain. The annual rings shall have a contact angle of (45 15) to the broad faces. Make transverse cuts, neatly to give sharp edges and a fine-sawn finish to the end grain surfaces
