1、March 2015 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、91.140.30; 27.080This standard has been included in the body of DVGW Technical Rules.!%A3$“2301601www.din.deDDIN EN 12309-1Gas-fired sorption appliances for heating and/or cooling with a net heatinput not exceeding 70 kW Part 1: Terms and definitions;English version EN 12309-1:2014,English translati
3、on of DIN EN 12309-1:2015-03Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einerNennwrmebelastung nicht ber 70 kW Teil 1: Begriffe;Englische Fassung EN 12309-1:2014,Englische bersetzung von DIN EN 12309-1:2015-03Appareils sorption fonctionnant au gaz pour le chauffage et/ou le refroidis
4、sement dedbit calorifique sur PCI infrieur ou gal 70 kW Partie 1: Termes et dfinitions;Version anglaise EN 12309-1:2014,Traduction anglaise de DIN EN 12309-1:2015-03Partially supersedesDIN EN 12309-1:1999-10 andDIN EN 12309-2:2000-06See start of applicationwww.beuth.deDocument comprises 32 pagesIn c
5、ase of doubt, the German-language original shall be considered authoritative.02.15 DIN EN 12309-1:2015-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-03-01. DIN EN 12309-1:1999-10 and DIN EN 12309-2:2000-06 may be used in parallel u
6、ntil 2015-06-30. National foreword This standard includes safety requirements. This document (EN 12309-1:2015-03) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired was
7、hing and drying appliances” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-03-01 AA Husliche, gewerbliche und industrielle Gasanwendung. This standard has bee
8、n developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water) and has been included in the body of technical rules and standards for gas issued by the DVGW. Amendments This standard differs from DIN EN 12309
9、-1:1999-10 and DIN EN 12309-2:2000-06 as follows: a) the EN 12309 standards series has been restructured and supplemented: EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, and EN 12309-1 and EN 12309 Parts 3 to 7 supersede EN 12309-2:2000; b) EN 12309-1:2014 specifies the terms and definitions f
10、or gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Previous editions DIN 33830-2: 1988-06 DIN EN 12309-1: 1999-10 DIN EN 12309-2: 2000-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12309-1 December 2014 ICS 27.080; 91.140.30 Supersedes EN
11、 12309-1:1999, EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions Appareils sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de dbit calorifique sur PCI infrieurou ga
12、l 70 kW - Partie 1: Termes et dfinitions Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einer Nennwrmebelastung nicht ber 70 kW -Teil 1: Begriffe This European Standard was approved by CEN on 18 October 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whic
13、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eur
14、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members a
15、re the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, R
16、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and
17、 by any means reserved worldwide for CEN national Members. Ref. No. EN 12309-1:2014 EEN 12309-1:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 1 of EN 12309 5 2 Normative references 5 3 Terms and definitions .6 3.1 Appliance and its constituents .6 3.2
18、Combustion products circuit . 10 3.3 Adjusting, control and safety devices 10 3.4 Operation of the appliance 12 3.5 Gases . 14 3.6 Conditions of operation, measurement and calculations 16 Bibliography . 28 DIN EN 12309-1:2015-03 EN 12309-1:2014 (E) 3 Foreword This document (EN 12309-1:2014) has been
19、 prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of
20、a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. This document supersedes EN 12309-1:1999 and EN 12309-2:2000. Attention is drawn to the possibility that so
21、me of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This standard comprises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with
22、a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Requirements; Part 6: Calculation of seasonal performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN
23、12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:2000. EN 12309-1, EN 12309-2, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the Euro
24、pean Directive 2009/142/EC relating to appliances burning gaseous fuels (see prEN 12309-2:2013, Annex ZA for safety aspects and EN 12309-5:2014, Annex ZA for rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests condition
25、s, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex ZA; EN 12309-6:2014, Annex ZA and EN 12309-7:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whene
26、ver new mandates could apply. EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolution BT 27/2008 regarding CEN approach on addressing environmental issues in product and service standards. Compared to EN 12309-1:1999, the following modifications have been made: DIN EN 123
27、09-1:2015-03 EN 12309-1:2014 (E) 4 EN 12309-1:2014 gathers terms and definitions from all the other parts of EN 12309. Moreover, new terms and definitions used in the other parts have been added and existing terms and definitions have been updated consistently to the other parts of this standard. Ac
28、cording to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa
29、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12309-1:2015-03 EN 12309-1:2014 (E) 5 1 Scope 1.1 Scope of EN 12309 Appliances cov
30、ered by this European Standard include one or a combination of the following: gas-fired sorption chiller; gas-fired sorption chiller/heater; gas-fired sorption heat pump. This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without he
31、at recovery. This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: integral burners under the control of
32、fully automatic burner control systems, closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one o
33、r more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), this standard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by th
34、e evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 1 of EN 12309
35、This part of this European Standard specifies the terms and definitions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. 2 Normative references Not applicable. DIN EN 12309-1:2015-03 EN 12309-1:2014 (E) 6 3 Terms and definitions 3.1 Appliance an
36、d its constituents 3.1.1 absorption process in which molecules of the refrigerant are dissolved into a liquid 3.1.2 adsorption process in which molecules of the refrigerant are held at the surface of a solid (possibly porous) structure 3.1.3 aeration adjuster device enabling the air to be set at the
37、 desired value according to the supply conditions 3.1.4 air-conditioners encased assembly or assemblies designed as an appliance to provide delivery of conditioned air to an enclosed space (room for instance) or zone Note 1 to entry: The medium used for distribution of heating and/or cooling is excl
38、usively air. 3.1.5 appliance assembly of various parts according to the installation instructions, if the appliance is supplied to the market in multiple parts Note 1 to entry: Accessories provided optionally are not to be included. Note 2 to entry: Appliance may be supplied to be marketed in one or
39、 more than one part. 3.1.6 bivalent appliance encased assembly or assemblies designed and packaged which is made up of components that can be tested separately 3.1.7 brine liquid that has a freezing point depressed relative to water 3.1.8 chiller encased assembly or assemblies designed as an applian
40、ce, whose primary function is delivery of cooling only, and whose primary function is dependent on circulation of fluid (refrigerant and/or solution) within the absorption, adsorption or refrigerant circuit(s) 3.1.9 chiller/heater encased assembly or assemblies, whose primary function is delivery of
41、 cooling and/or heating and whose primary function of cooling is dependent on circulation of fluid (refrigerant and/or solution) within the absorption, adsorption or refrigerant circuit(s) Note 1 to entry: The primary function of heating only uses directly or indirectly the energy delivered by the c
42、ombustion system. DIN EN 12309-1:2015-03 EN 12309-1:2014 (E) 7 3.1.10 closed system system in which the fluid within the refrigerant circuit (e.g. water, ammonia, etc.) providing heating or cooling does not come into contact with the surrounding air or the heat transfer medium (e.g. water, brine, ai
43、r) 3.1.11 condensing appliance appliance in which, under normal operating conditions and at certain operating water temperatures, the water vapour in the combustion products is partially condensed in order to make use of the latent heat of this water vapour for heating and/or heat recovery purposes
44、3.1.12 ductless appliance outdoor appliance which is not designed to be fitted with external ducts to transport air to, or products of combustion away from, the appliances casing 3.1.13 gas circuit part of the appliance that conveys or contains the gas between the appliance gas inlet connection and
45、the burner(s) 3.1.14 gas fired appliance which mainly consume gas for implementation of the function or functions, the electrical power consumption being dedicated to auxiliaries needed for operation 3.1.15 gas inlet connection part of the appliance intended to be connected to the gas supply 3.1.16
46、gas rate adjuster component allowing an authorized person to set the gas rate of the burner to a predetermined value according to the supply conditions Note 1 to entry: Adjustment may be progressive (screw adjuster) or in discrete steps (by changing restrictors). Note 2 to entry: The adjusting screw
47、 of an adjustable pressure regulator is regarded as a rate adjuster. 3.1.17 heat pump encased assembly or assemblies designed as an appliance whose primary function is delivery of heat and/or cooling (the primary function is dependent on circulation of fluid (refrigerant and/or solution) within the
48、absorption, adsorption or refrigerant circuit(s) 3.1.18 heat recovery recovery of heat rejected by the appliance whose primary control is in the cooling mode by means of an additional heat exchanger (e.g. a chiller with an additional condenser or absorber) DIN EN 12309-1:2015-03 EN 12309-1:2014 (E) 8 3.1.19 heat transfer medium any medium (e.g. air, water, brine, etc.) used for the transfer of heat to or from refrigerant-containing parts of the appliance Note 1 to entry: The medium may be the cooling
