1、March 2015 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、91.140.30; 27.080This standard has been included in the body of DVGW Technical Rules.!%A3“2301604www.din.deDDIN EN 12309-7Gas-fired sorption appliances for heating and/or cooling with a net heatinput not exceeding 70 kW Part 7: Specific provisions for hybrid appliances;English version EN 12309-7:201
3、4,English translation of DIN EN 12309-7:2015-03Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einerNennwrmebelastung nicht ber 70 kW Teil 7: Spezifische Bestimmungen fr Hybridanlagen;Englische Fassung EN 12309-7:2014,Englische bersetzung von DIN EN 12309-7:2015-03Appareils sorption fonc
4、tionnant au gaz pour le chauffage et/ou le refroidissement dedbit calorifique sur PCI infrieur ou gal 70 kW Partie 7: Dispositions spcifiques pour les appareils hybrides;Version anglaise EN 12309-7:2014,Traduction anglaise de DIN EN 12309-7:2015-03Together with DIN EN 12309-1:2015-03, DIN EN 12309-3
5、:2015-03, DIN EN 12309-4:2015-03,DIN EN 12309-5:2015-03 and DIN EN 12309-6:2015-03 supersedes DIN EN 12309-2:2000-06See start of applicationSupersedes: see belowwww.beuth.deDocument comprises 28 pagesIn case of doubt, the German-language original shall be considered authoritative.02.15 DIN EN 12309-
6、7:2015-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-03-01. DIN EN 12309-2:2000-06 may be used in parallel until 2015-06-30. National foreword This standard includes safety requirements. This document (EN 12309-7:2014) has been pre
7、pared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the DIN-Nor
8、menausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-03-01 AA Husliche, gewerbliche und industrielle Gasanwendung. This standard has been developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific As
9、sociation for Gas and Water) and has been included in the body of technical rules and standards for gas issued by the DVGW. Amendments This standard differs from DIN EN 12309-2:2000-06 as follows: a) the EN 12309 standards series has been restructured and supplemented: EN 12309-1 and EN 12309-2 supe
10、rsede EN 12309-1:1999, and EN 12309-1 and EN 12309 Parts 3 to 7 supersede EN 12309-2:2000; b) EN 12309-7:2014 deals particularly with the specific provisions for hybrid appliances for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Previous edition
11、s DIN 33830-2: 1988-06 DIN EN 12309-2: 2000-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12309-7 December 2014 ICS 27.080; 91.140.30 Supersedes EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Speci
12、fic provisions for hybrid appliances Appareils sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de dbit calorifique sur PCI infrieurou gal 70 kW - Partie 7 : Dispositions spcifiques pour les appareils hybrides Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einer N
13、ennwrmebelastung nicht ber 70 kW -Teil 7: Spezifische Bestimmungen fr Hybridanlagen This European Standard was approved by CEN on 18 October 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of
14、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).
15、 A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cy
16、prus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United K
17、ingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1230
18、9-7:2014 EEN 12309-7:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 7 of EN 12309 5 2 Normative references 6 3 Terms and definitions .6 4 Test conditions 6 4.1 General 6 4.2 Inlet temperatures of the indoor heat exchanger .8 4.3 Inlet temperatures into
19、the outdoor heat exchanger .9 4.3.1 Air to water hybrid heating appliance9 4.3.2 Ground water sourced hybrid heating appliances 10 4.3.3 Ground heat sourced hybrid heating appliances 10 4.3.4 Solar sourced hybrid heating appliances 10 5 Calculation of the seasonal performance in the heating mode . 1
20、1 6 Standard rating conditions of gas driven sorption heat pump based hybrid heating appliances . 11 Annex A (informative) Estimation of the heating fluid inlet and outlet temperature into/out of the indoor heat exchanger . 14 Annex B (informative) Inlet temperature into the outdoor heat exchanger f
21、or ground heat sourced sorption heat pump based hybrid heating appliances 15 Annex C (informative) Inlet temperature into the outdoor heat exchanger for solar sourced sorption heat pump based hybrid heating appliances . 17 Annex D (informative) Inlet temperature of the outdoor heat exchanger for sol
22、ar collector assisted sorption heat pump based hybrid heating appliances 18 D.1 Introduction . 18 D.2 Solar-assisted ground sourced gas-driven sorption heat pumps . 18 D.3 Solar-assisted air sourced gas-driven sorption heat pumps . 18 Annex E (informative) Calculation of the seasonal gas utilization
23、 efficiency with partial heat demand coverage by the applied solar collectors 19 Annex F (informative) Estimation of the seasonal performance of hybrid heating appliances at building design loads deviating from the appliances nominal heating capacity 20 Annex G (normative) Calculation of the seasona
24、l space heating energy efficiency for hybrid gas-driven sorption heat pump based heating appliances . 21 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 813/2013 24 Annex ZB (informative) Relationship between this European Stan
25、dard and the requirements of Commission Regulation (EC) No 811/2013 25 Bibliography . 26 DIN EN 12309-7:2015-03 EN 12309-7:2014 (E) 3 Foreword This document (EN 12309-7:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-f
26、ired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and co
27、nflicting national standards shall be withdrawn at the latest by June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying
28、any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which
29、are integral parts of this document. This standard comprises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods;
30、Part 5: Requirements; Part 6: Calculation of seasonal performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 1
31、2309-2:2000. EN 12309-1, EN 12309-2, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the European Directive 2009/142/EC relating to appliances burning gaseous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and An
32、nex ZA of EN 12309-5:2014 for rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:20
33、14, Annex ZA; EN 12309-6:2014, Annex ZA and EN 12309-7:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whenever new mandates could apply. DIN EN 12309-7:2015-03 EN 12309-7:2014 (E) 4 EN 12309-8 (“Environmental aspects”) deals with the i
34、ncorporation of the Resolution BT 27/2008 regarding CEN approach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust
35、ria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede
36、n, Switzerland, Turkey and the United Kingdom. DIN EN 12309-7:2015-03 EN 12309-7:2014 (E) 5 1 Scope 1.1 Scope of EN 12309 Appliances covered by this European Standard include one or a combination of the following: gas-fired sorption chiller; gas-fired sorption chiller/heater; gas-fired sorption heat
37、 pump. This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor
38、installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: integral burners under the control of fully automatic burner control systems, closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be co
39、oled or heated, mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), this s
40、tandard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the sco
41、pe of EN 12309. All the symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 7 of EN 12309 This part of EN 12309 deals particularly with the specific provisions of hybrid heating appliances based on gas-driven sorption heat pumps as defined in Part 1. The
42、 heating appliances covered by this European Standard are of a hybrid type, an encased assembly or assemblies combining a direct or indirect-fired sorption heat pump for base load and a peak load condensing boiler with only one flue system, electrical supply cable and human machine interface to the
43、end user. The direct- or indirect-fired sorption heat pump integrated in the hybrid appliances in this European Standard could be intermittent or continuously operating ab or adsorption heat pump. The control system of hybrid heating appliances decides on the transition between the heat pump operati
44、on mode to/from the mixed operation mode (heating by both sorption heat pump as well as the peak boiler) and the direct heating mode (only peak boiler) depending on the heating fluid inlet or return temperature, temperature of brine entering the indoor heat exchanger (evaporator) of the heat pump, t
45、he required outlet or supply temperature dependent on the outdoor temperature as well as the target value of the indoor or room temperature. Upon transition from the heat pump operation mode to the mixed operation mode, the control system decides also on the degree of mixing based on the above menti
46、oned parameters. DIN EN 12309-7:2015-03 EN 12309-7:2014 (E) 6 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the
47、latest edition of the referenced document (including any amendments) applies. EN 12309-1:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 1: Terms and definitions prEN 12309-2:20131, Gas-fired sorption appliances for heating and/or cooling
48、 with a net heat input not exceeding 70 kW Part 2: Safety EN 12309-3:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 3: Test conditions EN 12309-4:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 4: Test methods EN 12309-6:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 6: Calculation of seasonal performances
