1、December 2016 English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.060.30!%“2599161www.din.deDI
2、N EN 12566-7Small wastewater treatment systems for up to 50 PT Part 7: Prefabricated tertiary treatment units;English version EN 125667:2016,English translation of DIN EN 12566-7:2016-12Kleinklranlagen fr bis zu 50 EW Teil 7: Vorgefertigte Anlagen fr eine dritte Reinigungsstufe;Englische Fassung EN
3、125667:2016,Englische bersetzung von DIN EN 12566-7:2016-12Petites installations de traitement des eaux uses jusqu 50 PTE Partie 7: Units prfabriques de traitement tertiaire;Version anglaise EN 125667:2016,Traduction anglaise de DIN EN 12566-7:2016-12SupersedesDIN EN 125667:201307See start of applic
4、ationwww.beuth.deDocument comprises 51 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN 12566-7:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016
5、-12-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information,
6、users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 12566-7:2013-07, may be used in parallel with this standard during a specified transition period where such has been laid down in th
7、e Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 12566-7:2016) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering” (Secretariat: DIN, Germany). The responsible German body involved in its prepar
8、ation was DIN-Normenausschuss Wasserwesen (DIN Standards Committee Water Practice), Working Committee NA 119-05-04 AA Kleinklranlagen. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 15705 DIN ISO 15705 Amendments This standard differs fro
9、m DIN EN 12566-7:2013-07 as follows: a) the text has been brought in line with the EU Construction Products Regulation. Previous editions DIN EN 12566-7: 2013-07 DIN EN 12566-7:2016-12 3 National Annex NA (informative) Bibliography DIN ISO 15705, Water quality Determination of the chemical oxygen de
10、mand index (ST-COD) Small-scale sealed tube method DIN EN 12566-7:2016-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12566-7 August 2016 ICS 13.060.30 Supersedes EN 12566-7:2013English Version Small wastewater treatment systems for up to 50 PT -Part 7: Pr
11、efabricated tertiary treatment units Petites installations de traitement des eaux uses jusqu 50 PTE - Partie 7: Units prfabriques de traitement tertiaire Kleinklranlagen fr bis zu 50 EW - Teil 7: Vorgefertigte Anlagen fr eine dritte ReinigungsstufeThis European Standard was approved by CEN on 25 Jun
12、e 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai
13、ned on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN
14、-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,
15、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre:
16、 Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12566-7:2016 EEN 12566-7:2016 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols and ab
17、breviated terms 6 3.1 Terms and definitions . 6 3.2 Symbols and abbreviated terms 8 4 Product characteristics . 8 4.1 Design 8 4.1.1 General 8 4.1.2 Overall dimensions . 8 4.1.3 Inlets, outlets, internal pipework and connections 8 4.1.4 Access 9 4.2 Load bearing capacity 9 4.3 Tertiary treatment eff
18、iciency . 9 4.4 Watertightness 10 4.5 Power consumption 10 4.6 Durability 10 4.6.1 General . 10 4.6.2 Concrete, steel, PVC-U, PE, GRP, PDCPD and flexible sheets . 10 4.7 Reaction to fire 10 4.7.1 General . 10 4.7.2 Units classified as Class A1 without the need for testing . 11 4.7.3 Units classified
19、 according to the test results 11 4.8 Dangerous substances 11 5 Testing, assessment and sampling . 12 5.1 Load bearing capacity . 12 5.1.1 Generals . 12 5.1.2 Load bearing capacity determined by calculation . 12 5.1.3 Load bearing capacity determined by testing . 13 5.2 Tertiary treatment efficiency
20、 15 5.3 Watertightness 15 5.4 Power consumption 15 6 Assessment and verification of constancy of performance AVCP 15 6.1 General . 15 6.2 Type testing 16 6.2.1 General . 16 6.2.2 Test samples, testing and compliance criteria 16 6.2.3 Test reports 18 6.2.4 Shared other party results 18 6.2.5 Cascadin
21、g determination of the product type results 19 6.3 Factory production control 20 6.3.1 General . 20 6.3.2 Requirements 20 6.3.3 Product specific requirements 23 6.3.4 Initial inspection of factory and of FPC 23 6.3.5 Continuous surveillance of FPC . 24 6.3.6 Procedure for modifications 24 DIN EN 125
22、66-7:2016-12 EN 12566-7:2016 (E) 3 6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity . 24 7 Nominal designation 25 8 Marking, labelling and packaging . 25 8.1 Marking 25 8.2 Technical information accompanying the unit 26 8.3 Installation ins
23、tructions . 27 8.4 Operation manual . 27 Annex A (normative) Tertiary treatment efficiency test procedure 29 A.1 Preliminary requirements 29 A.1.1 General . 29 A.1.2 Installation and commissioning 29 A.1.3 Operation procedures during testing 29 A.1.4 Data to be monitored. 29 A.2 Test procedure 30 A.
24、2.1 Time for establishment 30 A.2.2 Influent characteristics 30 A.2.3 Daily flow pattern for testing . 30 A.2.4 Test procedure 30 A.2.4.1 General . 30 A.2.4.2 Overload . 31 A.2.4.3 Power breakdown/Machine breakdown . 31 A.2.4.4 Power consumption . 31 A.2.5 Influent and effluent sampling. 32 A.3 Samp
25、le analysis . 32 A.4 Test report 32 Annex B (normative) Definition of processes . 33 Annex C (informative) Analysis method . 34 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 35 ZA.1 Scope and relevant characteristics 3
26、5 ZA.2 Procedure of attestation of conformity of prefabricated tertiary treatment unit 36 ZA.2.1 System(s) of AVCP . 36 ZA.2.2 Declaration of performance (DoP) . 39 ZA.2.2.1 General . 39 ZA.2.2.2 Content . 40 ZA.2.2.3 Example of DoP . 41 ZA.3 CE marking and labelling . 43 Bibliography . 46 DIN EN 12
27、566-7:2016-12 EN 12566-7:2016 (E) 4 European foreword This document (EN 12566-7:2016) has been prepared by Technical Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication
28、of an identical text or by endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not
29、be held responsible for identifying any or all such patent rights. This document supersedes EN 12566-7:2013. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For re
30、lationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The differences between this version and EN 12566-7:2013 are mainly editorial changes according to the Construction Product Regulation (CPR) and declaration of power consumption and desludging duri
31、ng treatment efficiency test. The standard series EN 12566 “Small wastewater treatment systems for up to 50 PT” contains the following parts (see Figure 1): Part 1: Prefabricated septic tanks; Part 3: Packaged and/or site assembled domestic wastewater treatment plants; Part 4: Septic tanks assembled
32、 in situ from prefabricated kits; Part 6: Prefabricated treatment unit used for septic tank effluent; Part 7: Prefabricated tertiary treatment unit (this document). For filtration systems, CEN/TC 165 decided to publish the following CEN Technical reports, which are considered as Code of practices an
33、d do not specify treatment requirements: Part 2: Soil infiltration systems; Part 5: Pre-treated Effluent Filtration systems. DIN EN 12566-7:2016-12 EN 12566-7:2016 (E) 5 Key A domestic wastewater 1 prefabricated septic tank B septic tank effluent 2 soil infiltration system C treated infiltrated effl
34、uent 3 packaged and/or site assembled domestic wastewater treatment plant D treated wastewater 4 septic tank assembled in situ from prefabricated kit E tertiary treated wastewater 5 pre-treated effluent filtration system 6 prefabricated treatment unit used for septic tank effluent 7 prefabricated te
35、rtiary treatment unit National regulations may specify different arrangements between the products described in the standard series EN 12566. Figure 1 Scheme related to the arrangement of the parts of EN 12566 According to the CEN/CENELEC Internal Regulations, the national standards organizations of
36、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth
37、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12566-7:2016-12 EN 12566-7:2016 (E) 6 1 Scope This European Standard specifies requirements, test methods, the marking and evaluation of conformity for a packaged and/or
38、site assembled tertiary treatment unit (see Figure 1). It applies for tertiary treatment units that are placed on the market as complete units used for the tertiary treatment of domestic wastewater by biological, physical, chemical, electrical processes and coming from: a) units in accordance with E
39、N 12566-3 or EN 12566-6; b) installations designed and constructed in accordance with CEN/TR 12566-5. Equivalent secondary treated effluent may come from existing systems. Package and/or site assembled tertiary treatment units according to this standard consist of one or more watertight tanks withou
40、t any direct infiltration into the ground, made of concrete, corrosion resistant or coated steel, un-plasticised poly-vinyl chloride (PVC-U), polyethylene (PE), glass reinforced thermosetting plastics (GRP) based on polyester resin (UP) (GRP-UP), polypropylene (PP), polydicyclopentadiene (PDCPD) and
41、 flexible sheets (HDPE, PP, PVE and EPDM). This standard applies to tertiary treatment units for use above ground (outside the building) or buried in the ground where no vehicle loads are applied to the unit. This standard does not apply to tertiary treatment systems forming part of units covered by
42、 EN 12566-3 and EN 12566-6. This standard does not cover the systems for microorganism reduction. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited a
43、pplies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12566-3:2016, Small wastewater treatment systems for up to 50 PT Part 3: Packaged and/or site assembled domestic wastewater treatment plants CEN/TR 12566-5, Small wastewater treatment
44、 systems up to 50 PT Part 5: Pre-treated Effluent Filtration systems EN 12566-6:2016, Small wastewater treatment systems for up to 50 PT Part 6: Prefabricated treatment units for septic tank effluent EN 13501-1, Fire classification of construction products and building elements Part 1: Classificatio
45、n using data from reaction to fire tests EN 16323:2014, Glossary of wastewater engineering terms 3 Terms, definitions, symbols and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12566-3:2016, EN 12566-6:2016, EN 16323:2014 and the
46、 following apply. DIN EN 12566-7:2016-12 EN 12566-7:2016 (E) 7 3.1.1 tertiary treatment additional treatment process which results in further purification than that obtained by applying primary and secondary treatment Note 1 to entry: It is recommended that the expression for the treatment, e.g. nit
47、rogen removal, phosphorus removal, polishing effects, suspended solid removal, is used since in some case the tertiary treatment can also be integrated in the secondary treatment. 3.1.2 packaged unit prefabricated factory-built unit 3.1.3 site assembled unit unit composed of prefabricated components
48、 assembled on site coming from one manufacturer 3.1.4 biological processes processes in which the treatment is mainly carried out by micro-organism activity 3.1.5 physical processes processes in which the treatment is mainly carried out by using the physical properties of a media 3.1.6 chemical proc
49、esses processes in which the treatment is mainly carried out by the addition of chemical agents 3.1.7 electrical processes processes in which the treatment is mainly carried out by the use of electricity 3.1.8 product family group of products in which, for the purpose of evaluation, the selected property(s) is/are similar for all products within the group Note 1 to entry: The definition of family takes into account at least similar
