1、July 2010 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 8
2、1.100!$imd“1707465www.din.deDDIN EN 13035-4Machines and plants for the manufacture, treatment and processing offlat glass Safety requirements Part 4: Tilting tables (includes Amendment A1:2009)English translation of DIN EN 13035-4:2010-07Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung
3、 von Flachglas Sicherheitsanforderungen Teil 4: Kipptische (enthlt nderung A1:2009)Englische bersetzung von DIN EN 13035-4:2010-07Machines et installations pour la production, le faonnage et la transformation du verreplat Exigences de scurit Partie 4: Tables basculantes (Amendement A1:2009 inclus)Tr
4、aduction anglaise de DIN EN 13035-4:2010-07SupersedesDIN EN 13035-4:2004-09www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 26 pages07.10 DIN EN 13035-4:2010-07 2 A comma is used as the decimal marker. Start of validity This standard tak
5、es effect on 1 July 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German body involved in its preparatio
6、n was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-13 AA Glasmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of glass machines, and of the employers liability insurance associations contributed
7、to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 December 2009) and the “revised Machinery Directive”, Directive 2006/42/EC, which took effect on 29 December 2009, and which
8、 apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonize
9、d” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in clause 2 and in the bibliography of this document have been published as the corresponding DIN EN or
10、 DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 13035-4:2004-09 as follows: a) Foreword, Introduction and Scope of the standard have been updated. b) Normative references have been updated. c) Clause 3, first paragraph, first sentence, has been updated. d) Cl
11、ause 4, Table 1, has been updated. e) Clause 5, first sentence and NOTE, has been updated. f) Subclause 5.1.1, first sentence, has been updated. g) Subclause 5.1.2 has been amended. h) Subclause 5.1.3 has been updated. i) Subclause 5.2.2 has been amended. DIN EN 13035-4:2010-07 3 j) Subclause 5.3.3
12、has been amended. k) Subclause 5.3.6.2 has been amended. l) Subclause 5.3.7 has been amended. m) Subclause 5.3.11 has been amended. n) Subclause 5.3.14 has been updated. o) Subclause 5.3.15 has been added. p) Subclause 5.4 has been added. q) Clause 6 has been updated. r) Clause 7, first sentence, ha
13、s been updated. s) Subclause 7.1, first sentence, has been updated. t) Subclause 7.1.1 has been updated/amended. u) Subclause 7.1.7 has been updated. v) Subclauses 7.1.11 and 7.1.12 have been added. w) Subclause 7.2 has been updated/amended. x) Item 5) under Figure B.1 in Annex B has been updated. y
14、) The normative Annex E has been included. z) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC” has been updated. aa) Annex ZB (informative) “Relationship between this European Standard and the Essential
15、Requirements of EU Directive 2006/42/EC” has been included. bb) The bibliography has been updated. Previous editions DIN EN 13035-4: 2004-09 DIN EN 13035-4:2010-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-4:2003+A1 December 2009 ICS 81.100 Superse
16、des EN 13035-4:2003English Version Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 4: Kipptische This European
17、 Standard was approved by CEN on 23 May 2003 and includes Amendment 1 approved by CEN on 8 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio
18、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat
19、ion under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
20、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Mana
21、gement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-4:2003+A1:2009: EMachines et installations pour la production, le faonnage et la transformation du verre plat - Exigences d
22、e scurit - Partie 4: Tables basculantes EN 13035-4:2003+A1:2009 (E) 2 Contents Foreword 30 Introduction 41 Scope 42 Normative references 43 Terms and definitions Symbols and abbreviated terms . 5 4 List of significant hazards 65 Safety requirements and/or protective measures 75.1 All-automatic tilti
23、ng tables 75.2 Tilting tables where access is intended 85.3 Additional requirements . 85.4 Noise . 96 Verification of safety requirements and/or protective measures . 97 Information for use 10Annex A (normative) Electrical interlocking of a movable guard 12Annex B (normative) Tilting table with safe
24、guarding (access intended) 13Annex C (normative) Minimum gaps on tilting tables arranged as single table with free access 15Annex D (normative) Fixed single tilting table controlled by a hold-to-run device with marking of the danger zone on floor . 17Annex E (normative) !Noise-test code“ . 18E.1 A-w
25、eighted emission sound pressure level determination . 18E.2 Installation and mounting conditions 18E.3 Operating conditions . 18E.4 Measurement uncertainties 18E.5 Information to be recorded . 18E.6 Information to be reported 18Annex ZA (informative) !Relationship between this European Standard and
26、the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC“ . 20Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 21Bibliography 22DIN EN 13035-4:2010-07 Page EN 13035-4:2003+A1:2009 (E) 3 Foreword This docu
27、ment (EN 13035-4:2003+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical t
28、ext or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible
29、for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-11-08. This document supersedes EN 13035-4:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This document has been prepared under a m
30、andate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. Annexes A to E are normative.“ This docu
31、ment is one of a series concerning machinery for the treatment and processing of flat glass. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austri
32、a, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13035-4:
33、2010-07 EN 13035-4:2003+A1:2009 (E) 4 0 Introduction This document is a type-C standard as stated in !EN ISO 12100-1“. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type-C stan
34、dard are different from those which are stated in type-A or -B standards, the provisions of this type-C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type-C standard. 1 Scope 1.1 This standard co
35、ntains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or supported at the lower edge leaning against a supporting surface. 1.2 !This standard deals with all s
36、ignificant hazards, hazardous situations and events relevant to tilting tables for flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminat
37、e or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Noise is not a significant hazard for this type of machines.“ 1.3 This standard is not applicable to tilting tables where all movements are done by human power. 1.4 This standard is not applicable
38、 to additional equipment, e.g. for cutting (see !EN 13035-3“), loading and unloading (see !EN 13035-5“), break-out (see !EN 13035-6“), transporting (see EN 619) of flat glass as used as integral parts of the machinery. If there are specific risks that arise in connection with tilting tables, appropr
39、iate measures are specified. 1.5 This document is not applicable to tilting tables which are manufactured before the date of publication of this document by CEN. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, o
40、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !deleted text“ EN 349, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ EN 953:1997, Safety of machinery Guards Genera
41、l requirements for the design and construction of fixed and movable guards !deleted text“ EN 999:1998, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body !deleted text“ DIN EN 13035-4:2010-07 EN 13035-4:2003+A1:2009 (E) 5 EN 1760-1:19
42、97, Safety of machinery Pressure sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2:2001, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing
43、 of pressure sensitive edges and pressure sensitive bars !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified)“ !CLC/TS 61496-2:2006, Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements
44、for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006)“ !EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201, Acoustics Noise emitted by machinery and equipment Measurement of emis
45、sion sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) EN ISO 11202, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels
46、at a work station and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method requiring environmental corrections (ISO
47、11204:1995, including Cor 1:1997) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO
48、12100-2:2003) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850, Safety of machinery Emergency stop Principles for design (ISO 13850:2006) EN ISO 13857:2008, Safety of machinery Safety distances to p
49、revent hazard zones being reached by upper and lower limbs (ISO 13857:2008)“ !deleted text“ 3 Terms and definitions Symbols and abbreviated terms For the purposes of this European Standard, the terms and definitions given in !EN ISO 12100-1:2003“ apply. Additional terms and definitions specifically needed for this document are added below: 3.1 table supporting surface for the deposit of sheets of f
