1、December 2016 English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.020.01; 23.040.99; 29.260.20
2、!%F“2596135www.din.deDIN EN 13160-7Leak detection systems Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets;English version EN 131607:2016,English translation of DIN EN 13160-7:2016-12Leckanzeigesysteme Teil 7: Anforderungen u
3、nd Prf/Bewertungsmethoden fr berwachungsrume, Leckschutzauskleidungen und Leckschutzummantelungen;Englische Fassung EN 131607:2016,Englische bersetzung von DIN EN 13160-7:2016-12Systmes de dtection de fuites Partie 7: Exigences et mthodes dessai/dvaluation pour les espaces interstitiels, pour les dt
4、ecteurs de fuite des revtements et les dtecteurs de fuite denveloppes;Version anglaise EN 131607:2016,Traduction anglaise de DIN EN 13160-7:2016-12SupersedesDIN EN 131607:200309See start of applicationwww.beuth.deDocument comprises 53 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the Ger
5、man-language original shall be considered authoritative.12.16 DIN EN 13160-7:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be noted that, in Germany, CE conformity marking of construction products will be perm
6、itted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant buildi
7、ng authority. The standard which this document replaces, DIN EN 13160-7:2003-09, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National fo
8、reword This document (EN 13160-7:2016) has been prepared by Technical Committee CEN/TC 393 “Equipment for storage tanks and for service stations” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Tankanlagen (DIN Standards Committee Tank Ins
9、tallations), Working Committee NA 104-2-03 AA Leckanzeigegerte. Amendments This standard differs from DIN EN 13160-7:2003-09 as follows: a) requirements and tests for permeation have been added; b) material PUR has been deleted; c) material properties have been changed; d) requirements from Part 1 h
10、ave been adopted in this part of DIN EN 13160; The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 6133 DIN ISO 6133 Previous editions DIN EN 13160-7: 2003-09 National Annex NA (informative) Bibliography DIN ISO 6133, Rubber and plastics Analy
11、sis of multipeak traces obtained in determination of tear strength and adhesion strength EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13160-7 July 2016 ICS 23.020.01; 23.040.99; 29.260.20 Supersedes EN 13160-7:2003English Version Leak detection systems - Part 7: Requirements and test/assessm
12、ent methods for interstitial spaces, leak detection linings and leak detection jackets Systmes de dtection de fuites - Partie 7: Exigences et mthodes dessai/dvaluation pour les espaces interstitiels, les dtecteurs de fuite des revtements et les dtecteurs de fuite denveloppes Leckanzeigesysteme - Tei
13、l 7: Anforderungen und Prf-/Bewertungsverfahren fr berwachungsrume, Leckschutzauskleidungen und Leckschutzummantelungen This European Standard was approved by CEN on 8 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
14、 European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official ve
15、rsions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austri
16、a, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
17、 Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN na
18、tional Members. Ref. No. EN 13160-7:2016 EContents Page European foreword 4 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 Requirements . 7 4.1 Effectiveness of leak detection lining kits and leak detection jacket kits 7 4.1.1 Tightness against liquid and vapour 7 4.1.2 Permeabilit
19、y of leak detection linings and leak detection jackets . 7 4.1.3 Free passage of liquid in the interstitial space 8 4.1.4 Free passage of air 8 4.1.5 Flow resistance after impact of stored media 8 4.1.6 Mechanical resistance against the imposed load by the stored medium . 8 4.1.7 Chemical resistance
20、 . 15 4.2 Durability of effectiveness . 15 4.2.1 Durability against temperature . 15 4.2.2 Durability against chemical attack . 15 4.2.3 Durability against mechanical load 15 5 Testing, assessment and sampling methods . 15 5.1 Effectiveness of leak detection lining kits and leak detection jacket kit
21、s 15 5.1.1 Tightness against liquid and gas . 15 5.1.2 Permeability . 17 5.1.3 Free passage of liquid in the interstitial space 18 5.1.4 Free passage of air 19 5.1.5 Flow resistance after impact of stored media 22 5.1.6 Mechanical resistance against the imposed load by the stored medium . 25 5.1.7 C
22、hemical resistance . 25 5.2 Durability of effectiveness . 25 5.2.1 Durability against temperature . 25 5.2.2 Durability against chemical attack . 25 5.2.3 Durability against mechanical load 25 6 Assessment and verification of constancy of performance AVCP 27 6.1 General 27 6.2 Type testing . 28 6.2.
23、1 General 28 6.2.2 Test samples, testing and compliance criteria . 29 6.2.3 Test reports . 29 6.2.4 Shared other party results . 29 6.2.5 Cascading determination of the product type results . 30 6.3 Factory production control (FPC) . 31 6.3.1 General 31 6.3.2 Requirements . 32 6.3.3 Product specific
24、 requirements. 34 6.3.4 Procedure for modifications . 35 EN 13160-7:2016 (E) DIN EN 13160-7:2016-12 2 6.3.5 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity . 35 7 Marking, labelling and packaging . 36 8 Environmental aspects . 37 Annex A (normat
25、ive) Determination of the interstitial space volume for class I-systems . 38 A.1 Test equipment 38 A.2 Preparation . 38 A.3 Procedure 39 A.4 Evaluation 41 Annex B (informative) Environmental aspects . 42 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Con
26、struction Products Regulation 305/2011/EU 44 ZA.1 Scope and relevant characteristics 44 ZA.2 Procedure for AVCP of leak detection linings and leak detection jackets . 45 ZA.2.1 System(s) of AVCP. 45 ZA.2.2 Declaration of performance (DoP) . 46 ZA.2.2.1 General . 46 ZA.2.2.2 Content . 47 ZA.2.2.3 Exa
27、mple of DoP . 47 ZA.3 CE marking and labelling . 49 EN 13160-7:2016 (E) DIN EN 13160-7:2016-12 3 European foreword This document (EN 13160-7:2016) has been prepared by Technical Committee CEN/TC 393 “Equipment for storage tanks and for filling stations”, the secretariat of which is held by DIN. This
28、 European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the
29、 elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13160-7:2003. This document has been prepared under a mandate given to CEN by the European Commission and the Eu
30、ropean Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to edition 2003 the following fundamental changes are given: requirements and tests for permea
31、tion added; material properties revised; requirements from EN 13160-1:2003 included, which are no longer contained in EN 13160-1:2016. This European Standard Leak detection systems consists of 7 parts: Part 1: General principles Part 2: Requirements and test/assessment methods for pressure and vacuu
32、m systems Part 3: Requirements and test/assessment methods for liquid systems for tanks Part 4: Requirements and test/assessment methods for sensor based leak detection systems Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurized pipework systems Part 6: Sensors
33、 in monitoring wells Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Sta
34、ndard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, EN 13160-7:2016 (E) DIN EN 13160-7:2016-12 4 Netherlands, Norway, Pol
35、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 13160-7:2016 (E) DIN EN 13160-7:2016-12 5 1 Scope This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection lining kits and leak detect
36、ion jacket kits. Leak detection lining kits and leak detection jackets kits intended to be used to create an interstitial space or leakage containment in single skin underground or above ground, non-pressurized, tanks designed for water polluting liquids. The kit has to be used only in conjunction w
37、ith leak detection kits covered by EN 13160-2 to EN 13160-4. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l
38、atest edition of the referenced document (including any amendments) applies. EN 228, Automotive fuels Unleaded petrol Requirements and test methods EN 4955, Flexible sheets for waterproofing Determination of foldability at low temperature Part 5: Plastic and rubber sheets for roof waterproofing EN 1
39、107-2, Flexible sheets for waterproofing Determination of dimensional stability Part 2: Plastic and rubber sheets for roof waterproofing EN 1849-2, Flexible sheets for waterproofing Determination of thickness and mass per unit area Part 2: Plastic and rubber sheets EN 10300:2005, Steel tubes and fit
40、tings for onshore and offshore pipelines Bituminous hot applied materials for external coating EN 13121-1, GRP tanks and vessels for use above ground Part 1: Raw materials Specification conditions and acceptance conditions EN 13121-2:2003, GRP tanks and vessels for use above ground Part 2: Composite
41、 materials Chemical resistance EN 13160-1:2016, Leak detection systems Part 1: General principles EN 13160-2:2016, Leak detection systems Part 2: Requirements and test/assessment methods for pressure and vacuum systems EN 13160-3:2016, Leak detection systems Part 3: Requirements and test/assessment
42、methods for liquid systems for tanks EN 13160-4:2016, Leak detection systems Part 4: Requirements and test/assessment methods for sensor based leak detection systems EN 14879-4:2007, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by agg
43、ressive media Part 4: Linings on metallic components EN ISO 62, Plastics Determination of water absorption (ISO 62) EN ISO 75-1, Plastics Determination of temperature of deflection under load Part 1: General test method (ISO 75-1) EN 13160-7:2016 (E) DIN EN 13160-7:2016-12 6 EN ISO 75-2, Plastics De
44、termination of temperature of deflection under load Part 2: Plastics and ebonite (ISO 75-2) EN ISO 75-3, Plastics Determination of temperature of deflection under load Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3) EN ISO 175, Plastics Methods of test for
45、 the determination of the effects of immersion in liquid chemicals (ISO 175) EN ISO 178, Plastics Determination of flexural properties (ISO 178) EN ISO 179-1, Plastics Determination of Charpy impact properties Part 1: Non-instrumented impact test (ISO 179-1) EN ISO 179-2, Plastics Determination of C
46、harpy impact properties Part 2: Instrumented impact test (ISO 179-2) EN ISO 527-1, Plastics Determination of tensile properties Part 1: General principles (ISO 527-1) EN ISO 527-3, Plastics Determination of tensile properties Part 3: Test conditions for films and sheets (ISO 527-3) EN ISO 604, Plast
47、ics Determination of compressive properties (ISO 604) EN ISO 1183-1, Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1) EN ISO 24345, Resilient floor coverings Determination of peel resistance (ISO 24345) ISO 2528, Sheet materials Determination of water vapour transmission rate Gravimetric (dish) method ISO 6133, Rubber and plastics Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength 3 Terms and definitions For
