1、August 2015 Translation by DIN-Sprachendienst.English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 91.060.50!%DFy“2333586www.din.deDDIN EN 13561External blinds and awnings Performance requirements including safety;English version EN 13561:2015,English translation of DIN EN 13561:2015-08Markisen Leistungs- und Sicherheitsanforderungen;Englische Fassung EN 13561:2015,Englische bersetzung von DIN E
3、N 13561:2015-08Stores extrieurs Exigences de performance, y compris la scurit;Version anglaise EN 13561:2015,Traduction anglaise de DIN EN 13561:2015-08SupersedesDIN EN 13561:2009-01See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.D
4、ocument comprises 60 pages 06.15 DIN EN 13561:2015-08 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-08-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has be
5、en listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard whic
6、h this document replaces, DIN EN 13561:2009-01, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13561:20
7、15) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering)
8、, Working Committee NA 005-09-01 AA Tren, Tore, Fenster, Abschlsse, Baubeschlge und Vorhangfassaden. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first place
9、d on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying
10、this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). Amendments This standard differs from DIN EN 13561:2009-01 as follows: a) Clause 1 “Scope” has been modified to integrate Pergola awnings; b) Subclause 4.1 “Resistance to wind loads” h
11、as been revised and aligned with the revised version of EN 1932 relating to the method of testing; c) Subclause 4.2 “Resistance of non retractable elements to pressure loads” has been added to integrate requirements on external blinds and awnings in the retracted position; d) in Subclause 4.6 “Opera
12、ting mechanism Diagrams HPV (“Human Pull Value”)”, the use of the HPV diagram has been rendered more precise; e) Subclause 4.11 “Additional thermal resistance R” has been rendered more precise; f) Subclause 4.12 “Total solar energy transmittance gtot” has been added; DIN EN 13561:2015-08 3 g) in Sub
13、clause 4.14 “Materials”, the part related to fabrics has been reviewed completely and reference to EN ISO 105-B04 and EN 12280-2 has been added. Requirements for metals have been rendered more precise; h) Clause 7 “Assessment and verification of constancy of performance AVCP” has been aligned with t
14、he European version; i) Annex B “List of significant machine hazards” has been modified and reference to EN ISO 12100 has been added; j) Annex C “Example of calculation for the wind resistance determination on fixed parts of external blinds in retracted position” has been added; k) Annex ZA has been
15、 modified to introduce a new mandated characteristic: the total solar energy trans-mittance gtot, and has been revised in accordance with requirements of the CPR. Previous editions DIN EN 13561: 2004-09, 2009-01 DIN EN 13561 Corrigendum 1: 2005-01 DIN EN 13561:2015-08 4 This page is intentionally bl
16、ank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13561 May 2015 ICS 91.060.50 Supersedes EN 13561:2004+A1:2008English Version External blinds and awnings - Performance requirements including safety Stores extrieurs - Exigences de performance, y compris la scurit Markisen - Leistungs- und Sic
17、herheitsanforderungen This European Standard was approved by CEN on 15 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
18、and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th
19、e responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos
20、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN
21、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13561:2015 EEN 13561:2015 (E) 2 Contents Page Foreword 4 Introduc
22、tion .6 1 Scope 7 2 Normative references 7 3 Terms and definitions .8 4 Product characteristics 10 4.1 Resistance to wind loads . 10 4.2 Resistance of non retractable elements to pressure loads . 10 4.3 Resistance to snow load (non retractable external blinds only) . 11 4.4 Resistance to water pocke
23、t . 11 4.4.1 General . 11 4.4.2 Determination of performance 11 4.4.3 Performance requirement 11 4.4.4 Performance classes 12 4.5 Operating effort . 12 4.5.1 General . 12 4.5.2 Determination of performance 12 4.5.3 Performance requirement and operating effort classes . 12 4.6 Operating mechanism Dia
24、grams HPV (“Human Pull Value”) 13 4.6.1 General . 13 4.6.2 Performances requirements 13 4.7 Resistance in case of misuse 15 4.7.1 Curtain and laths. 15 4.7.2 Determination of performance 17 4.7.3 Performance requirement 17 4.8 Mechanical endurance (repeated operation cycles) . 17 4.8.1 General . 17
25、4.8.2 Determination of performance 18 4.8.3 Performance requirement 18 4.8.4 Classes of endurance . 19 4.9 Operation in frosty conditions 19 4.10 Safety in use 19 4.10.1 General . 19 4.10.2 Falling of persons . 19 4.10.3 Protection from potentially harmful parts 20 4.10.4 Guided power operated exter
26、nal blinds Injurious contacts in operation. 20 4.10.5 Electric hazards 22 4.11 Additional thermal resistance R . 23 4.12 Total solar energy transmittance gtot23 4.13 Light transmittance characteristics 23 4.13.1 General . 23 4.13.2 Determination of performance 23 4.13.3 Performance requirement 23 4.
27、14 Materials 24 4.14.1 General . 24 4.14.2 Fabrics . 24 4.14.3 Metals . 27 4.15 Dimensional tolerances . 27 DINEN 13561:2015-08EN 13561:2015 (E) 3 4.15.1 General . 27 4.15.2 Determination of performance . 27 4.15.3 Performance requirement . 27 4.16 Bullet resistance 28 5 Handling and storage 28 5.1
28、General . 28 5.2 Determination of performance . 28 5.3 Performance requirement . 28 6 Information for use 29 6.1 General . 29 6.2 Signal and warning devices . 29 6.3 Accompanying documents (in particular the instruction handbook) 29 6.3.1 General . 29 6.3.2 Instructions for handling, unpacking and i
29、nstallation 29 6.3.3 Instructions for use and maintenance 30 6.4 Marking . 31 7 Assessment and verification of constancy of performance - AVCP 31 7.1 General . 31 7.2 Type Testing. 31 7.2.1 General . 31 7.2.2 Test samples, testing and compliance criteria. 32 7.2.3 Test reports 32 7.2.4 Shared other
30、party results 32 7.2.5 Cascading determination of the product type results . 33 7.3 Factory Production Control (FPC) . 34 7.3.1 General . 34 7.3.2 Requirements . 35 7.3.3 Product specific requirements . 37 7.3.4 Procedure for modifications . 37 7.3.5 One-off products, pre-production products (e.g. p
31、rototypes) 38 8 Marking . 38 Annex A (normative) Fabrics Determination of the elongation of external blinds fabrics under a static load Test method 40 Annex B (normative) List of significant machine hazards 47 Annex C (informative) Example of calculation for the wind resistance determination on fixe
32、d parts of external blinds in retracted position . 48 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Regulation 49 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42
33、/EC 55 Bibliography 56 DIN EN 13561:2015-08 EN 13561:2015 (E)4 Foreword This document (EN 13561:2015) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given
34、 the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015 and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may
35、be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13561:2004+A1:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associa
36、tion, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this document. This European Standard is a part of a series of standards dealing with blinds and shutters for buildings as defined i
37、n EN 12216. The major modifications to the previous edition are: the scope has been modified to integrate Pergola awnings; 4.1 “Resistance to wind loads” has been modified and has been aligned with the revised version of EN 1932 “Test methods”; 4.2 “Resistance of non retractable elements to pressure
38、 loads” has been added to integrate requirements on external blinds and awnings in the retracted position; 4.6 “Operating mechanism - Diagrams HPV (“Human Pull Value”)”, the use of the HPV diagram has been clarified; 4.11 “Additional thermal resistance R” has been clarified; 4.12 “Total solar energy
39、 transmittance gtot” has been added; 4.14 “Materials“, the part related to fabrics has been reviewed completely and EN ISO 105-B04 and EN 12280-2 have been integrated. Requirements for metals have been clarified; Clause 7 “Assessment and verification of constancy of performance - AVCP” has been alig
40、ned with the European template; Annex B “List of significant machine hazards” has been modified and EN ISO 12100 has been introduced; Annex C “Example of calculation for the wind resistance determination on fixed parts of external blinds in retracted position” has been added; Annex ZA has been modif
41、ied to introduce a new mandated characteristic: the total solar energy transmittance gtotand revised in accordance with requirements of the CPR. DIN EN 13561:2015-08 EN 13561:2015 (E) 5 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries
42、 are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
43、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13561:2015-08 EN 13561:2015 (E)6 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned, i.e. power operated products, and the extent to which hazards
44、, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other sta
45、ndards, for machines that have been designed and built according to the provisions of this type C standard. DINEN 13561:2015-08EN 13561:2015 (E) 7 1 Scope This European Standard specifies the performance requirements for blinds and awnings intended to be fitted externally to buildings and other cons
46、truction works. It deals also with the significant hazards for assembly, transport, installation, operation and maintenance (see list of significant machine hazards in Annex B). It applies to all external blinds and awnings whatever their design and nature of the materials used, as follows and defin
47、ed in EN 12216: folding arm awning, trellis arm awning, pivot arm awning, slide arm awning, vertical roller blind, marquisolette, faade awning, skylight awning, conservatory awning, Pergola awning, Dutch awning, insect screen; brise-soleil. This European Standard does not cover the wind resistance o
48、f non-retractable products, e.g. Dutch awnings and brise-soleil. The structural part to which the Pergola awning is fixed is not covered. The products covered by this European Standard may be operated manually, with or without compensating springs or by means of electric motors (power operated products). However, the durability and endurance of the autonomous supply for power operated external blinds and awnings not connected to the mains supply are not covered. This European Standard deals also with all s
