1、July 2014 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9
2、1.100.50!%7?“2202899www.din.deDDIN EN 13859-1Flexible sheets for waterproofing Definitions and characteristics of underlays Part 1: Underlays for discontinuous roofing;English version EN 13859-1:2014,English translation of DIN EN 13859-1:2014-07Abdichtungsbahnen Definitionen und Eigenschaften von Un
3、terdeck- und Unterspannbahnen Teil 1: Unterdeck- und Unterspannbahnen fr Dachdeckungen;Englische Fassung EN 13859-1:2014,Englische bersetzung von DIN EN 13859-1:2014-07Feuilles souples dtanchit Dfinitions et caractristiques des crans souples Partie 1: crans souples de sous-toiture pour couverture en
4、 petits lments discontinus;Version anglaise EN 13859-1:2014,Traduction anglaise de DIN EN 13859-1:2014-07SupersedesDIN EN 13859-1:2010-11See start of applicationwww.beuth.deDocument comprises 44 pagesIn case of doubt, the German-language original shall be considered authoritative.06.14 DIN EN 13859-
5、1:2014-07 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2014-07-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the Eur
6、opean Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13859-1:201
7、0-11, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13859-1:2014) has been prepared by Technical Commi
8、ttee CEN/TC 254 “Flexible sheets for waterproofing” (Secretariat: NEN, Netherlands). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-02-91 AA Flexible Bahnen unter Dachdeckungen, S
9、pA zu CEN/TC 254/WG 9. Amendments This standard differs from DIN EN 13859-1:2010-11 as follows: a) the application-related characteristic “emissivity” has been added; b) the wording and Annex ZA have been adapted to the CPR. Previous editions DIN EN 13859-1: 2005-05, 2009-01, 2010-11 EUROPEAN STANDA
10、RD NORME EUROPENNE EUROPISCHE NORM EN 13859-1 April 2014 ICS 91.100.50 Supersedes EN 13859-1:2010English Version Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing Feuilles souples dtanchit - Dfinitions et caractristiques de
11、s crans souples - Partie 1: crans souples de sous-toiture pour couverture en petits lments discontinus Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck- und Unterspannbahnen fr Dachdeckungen This European Standard was approved by CEN on 16 Fe
12、bruary 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
13、obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to th
14、e CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ire
15、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Ce
16、ntre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13859-1:2014 EEN 13859-1:2014 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Product chara
17、cteristics .7 4.1 General 7 4.2 Dimensions, straightness and mass per unit area .7 4.3 Application related characteristics 7 4.4 Dangerous substances .8 5 Testing 9 5.1 Sampling .9 5.2 Test methods 9 6 Assessment and verification of the constancy of performance AVCP 11 6.1 General . 11 6.2 Type test
18、ing . 11 6.3 Factory production control (FPC) . 12 7 Product data sheet 16 8 Marking, labelling and packaging . 16 Annex A (normative) Determination of tensile properties 18 A.1 General . 18 A.2 Apparatus 18 A.3 Sampling 18 A.4 Preparation of test specimens 18 A.5 Procedure 18 A.6 Expression and eva
19、luation of results . 19 A.7 Test report . 20 Annex B (normative) Determination of resistance to tearing 21 B.1 General . 21 B.2 Apparatus 21 B.3 Sampling 21 B.4 Preparation of test specimens 21 B.5 Procedure 21 B.6 Expression and evaluation of results . 22 B.7 Test report . 22 Annex C (normative) Ar
20、tificial ageing by exposure to UV and heat 23 C.1 General . 23 DIN EN 13859-1:2014-07 EN 13859-1:2014 (E) 3 C.2 Principle 23 C.3 Apparatus . 23 C.4 Preparation of test specimens . 23 C.5 Procedure . 24 C.6 Expression of results 24 C.7 Test report 24 Annex D (normative) Product type determination and
21、 frequencies of testing for factory production control . 26 Annex E (informative) Example of a product data sheet . 28 Annex F (normative) Determination of the watertightness of seams 30 F.1 General . 30 F.2 Terms and definitions . 30 F.3 Procedure . 30 F.4 Apparatus . 30 F.5 Preparation of the test
22、 specimens . 30 F.6 Procedure . 31 F.7 Evaluation. 31 F.8 Test report 31 Annex ZA (informative) Clauses of this European Standard addressing provisions of the EU Construction Products Regulation (CPR) . 32 ZA.1 Scope and relevant characteristics . 32 ZA.2 Procedures for AVPC of the flexible sheets f
23、or underlays . 33 ZA.2.1 Systems of AVPC 33 ZA.2.2 Declaration of performance (DoP) . 35 ZA.2.2.1 General 35 ZA.2.2.2 Content 36 ZA.2.2.3 Example of DoP 37 ZA.3 CE marking and labelling 39 Bibliography 42 DIN EN 13859-1:2014-07 EN 13859-1:2014 (E) 4 Foreword This document (EN 13859-1:2014) has been
24、prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014 and conflictin
25、g national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document s
26、upersedes EN 13859-1:2010. The main technical changes that have been made in this new edition are as follows: a) the application-related characteristic emissivity has been added; b) the wording and the Annex ZA have been adapted to the CPR. EN 13859, Flexible sheets for waterproofing Definitions and
27、 characteristics of underlays, is composed of the following parts: Part 1: Underlays for discontinuous roofing (the present document); Part 2: Underlays for walls. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and sup
28、ports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries a
29、re bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P
30、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13859-1:2014-07 EN 13859-1:2014 (E) 5 1 Scope This European standard specifies the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs.
31、 It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applica
32、tion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1107-1, Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability
33、EN 1107-2, Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing EN 1109, Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature EN 1296, Flexible shee
34、ts for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature EN 1297, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure
35、 to the combination of UV radiation, elevated temperature and water EN 1848-1, Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing EN 1848-2, Flexible sheets for waterproofing - Determination of length, width, straightne
36、ss and flatness - Part 2: Plastic and rubber sheets for roof waterproofing EN 1849-1, Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing EN 1849-2, Flexible sheets for waterproofing - Determination of thickness and ma
37、ss per unit area - Part 2: Plastic and rubber sheets EN 1928:2000, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness EN 1931, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing -
38、Determination of water vapour transmission properties EN 12310-1:1999, Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) EN 12311-1, Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - De
39、termination of tensile properties EN 13111, Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration DIN EN 13859-1:2014-07 EN 13859-1:2014 (E) 6 EN 13416:2001, Flexible sheets for waterproofing - Bitumen, plastic and rubber
40、 sheets for roof waterproofing - Rules for sampling EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests EN 13859-2:2014, Flexible sheets for waterproofing Definitions and characteristics of underl
41、ays Part 2: Underlays for walls EN 15976, Flexible sheets for waterproofing - Determination of emissivity EN ISO 11925-2, Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010) EN ISO 12572, Hygrothermal perfor
42、mance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13416:2001 and the following apply. 3.1 manufacturers declared value MDV value declared b
43、y the manufacturer accompanied by a declared tolerance 3.2 manufacturers limiting value MLV value stated by the manufacturer to be met during testing, that can be a minimum or a maximum value according to statements made under product characteristics of this document 3.3 sample sheet from which a te
44、st piece is taken 3.4 sampling procedure used to select or constitute a sample 3.5 test piece part of the sample from which test specimens are taken 3.6 test specimen piece of precise dimensions taken from the test piece 3.7 underlays for discontinuous roofing factory-made flexible sheets of plastic
45、s, bitumen, rubber or other suitable materials, which are used as underlay to coverings of sloping roofs (e.g. tiles, slates) 3.8 waterproofing action to prevent the passage of water from one plane to another DIN EN 13859-1:2014-07 EN 13859-1:2014 (E) 7 4 Product characteristics 4.1 General The arit
46、hmetic mean value calculated from a number of test results shall lie within the tolerance declared for the characteristic. 95 % of the individual results shall lie within the declared tolerance unless otherwise specified in this document. When tested for purposes other than initial type testing or f
47、actory production control, the tests to determine product characteristics indicated in this document shall be started within 1 month of delivery from the manufacturer. 4.2 Dimensions, straightness and mass per unit area The dimensions, straightness and mass per unit area shall comply with the values
48、 declared by the manufacturer (see Annex D) in accordance with 5.2.1. The tolerances are indicated in Table 1. Table 1 Tolerances on length, width, straightness and mass per unit area Characteristic Tolerance Length 0 % Width 0,5 % to + 1,5 % Straightness Maximum deviation from straightness: 30 mm per 10 m length or in proportion for other lengths (e.g. 15 mm per 5 m length) Mass per unit area Shall lie within the declared tolerance of the MDV 4.3 Application related characteristics 4.3.1 Reaction to fire Where
