1、European Standard EN 14011 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.This standard is part of the series Deutsche Einheitsverfahren zur Wasser-, Abwasser- und Schlamm-untersuchung Biologisch-kologische Gewsseruntersuchung (Gruppe M) (German standard methods forthe
2、 examination of water, waste water and sludge Biological-ecological methods of analysis (group M).National forewordThis standard has been prepared by CEN/TC 230 Water analysis (Secretariat: Germany).The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (WaterPra
3、ctice Standards Committee).Expert assistance and specialized laboratories will be required to perform the analysis described in thisstandard.Depending on the objective of the analysis, a check shall be made on a case-by-case basis as to whetherand to what extent additional conditions will have to be
4、 specified.Standard methods published as DIN Standards are obtainable from Beuth Verlag GmbH, either individuallyor grouped in volumes. The standard methods included in the loose-leaf publication entitled DeutscheEinheitsverfahren zur Wasser-, Abwasser- und Schlammuntersuchung will continue to be pu
5、blished byWiley-VCH Verlag and Beuth Verlag GmbH.ICS 13.060.70; 65.150Wasserbeschaffenheit Probenahme von Fisch mittels ElektrizittRef. No. DIN EN 14011 : 2003-07English price group 11 Sales No. 111111.03DEUTSCHE NORM July 2003EN 14011Continued overleaf.EN comprises 16 pages. No part of this standar
6、d may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Water qualitySampling of fish with electricityEnglish version of DIN EN 14011Page 2EN 14011 :
7、2003-07Standard methods or draft standards bearing the group title German standard methods for the examinationof water, waste water and sludge are classified under the following categories (main titles):General information (group A) (DIN 38402)Sensory analysis (group B) (DIN 38403)Physical and physi
8、cochemical parameters (group C) (DIN 38404)Anions (group D) (DIN 38405)Cations (group E) (DIN 38406)Substance group analysis (group F) (DIN 38407)Gaseous constituents (group G) (DIN 38408)Parameters characterizing effects and substances (group H) (DIN 38409)Biological-ecological methods of analysis
9、(group M) (DIN 38410)Microbiological methods (group K) (DIN 38411)Test methods using water organisms (group L) (DIN 38412)Individual constituents (group P) (DIN 38413)Sludge and sediments (group S) (DIN 38414)Bio-assays with microorganisms (group T) (DIN 38415)In addition to the methods described in
10、 the DIN 38402 to DIN 38415 series of standards, there are a numberof European Standards available, which also form part of the collection of German standard methods.Information on Parts of these series of standards that have already been published can be obtained from theoffices of the Normenaussch
11、uss Wasserwesen, telephone (030) 2601-2448, or from Beuth Verlag GmbH,Burggrafenstrae 6, 10787 Berlin, Germany.English versionICS 13.060.70; 65.150Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungW
12、ater qualitySampling of fish with electricity 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 14011 : 2003 EQualit de leau Echantillonnagedes poissons llectricitWasserbeschaffenheit Probenahmevon Fisch mittels ElektrizittThis E
13、uropean Standard was approved by CEN on 2002-12-05.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concern
14、ing such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language a
15、nd notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ire-land, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, S
16、lovakia,Spain, Sweden, Switzerland, and the United Kingdom.March 2003EN 14011Page 2EN 14011 : 2003Page 3EN 14011 : 2003Page 4EN 14011 : 2003Page 5EN 14011 : 2003Page 6EN 14011 : 2003Page 7EN 14011 : 2003Page 8EN 14011 : 2003Page 9EN 14011 : 2003Page 10EN 14011 : 2003Page 11EN 14011 : 2003Page 12EN 14011 : 2003Page 13EN 14011 : 2003Page 14EN 14011 : 2003Page 15EN 14011 : 2003Page 16EN 14011 : 2003
