DIN EN 14331-2004 en 5661 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC) g.pdf

上传人:livefirmly316 文档编号:667187 上传时间:2018-12-26 格式:PDF 页数:10 大小:458.71KB
下载 相关 举报
DIN EN 14331-2004 en 5661 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC) g.pdf_第1页
第1页 / 共10页
DIN EN 14331-2004 en 5661 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC) g.pdf_第2页
第2页 / 共10页
DIN EN 14331-2004 en 5661 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC) g.pdf_第3页
第3页 / 共10页
DIN EN 14331-2004 en 5661 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC) g.pdf_第4页
第4页 / 共10页
DIN EN 14331-2004 en 5661 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC) g.pdf_第5页
第5页 / 共10页
点击查看更多>>
资源描述

1、ICS 75.080Liquid petroleum productsSeparation and characterisation of fatty acid methyl esters (FAME)from middle distillate fuelsLiquid chromatography (LC)/gas chromatography (GC) methodEnglish version of DIN EN 14331Flssige Minerallerzeugnisse Trennung und Bestimmung von Fettsure-Methylestern (FAME

2、) ausMitteldestillaten Flssigchromatographie (LC)/Gaschromatographie (GC)European Standard EN 14331 : 2004 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been prepared by CEN/TC 307 Oilseeds, vegetable and animal fats and oils and their by-p

3、roducts Methods of sampling and analysis (Secretariat: France).The responsible German body involved in its preparation was the Normenausschuss Materialprfung(Materials Testing Standards Committee), Technical Committee Fette, le und lsamen.The DIN Standards corresponding to the European Standards ref

4、erred to in clause 2 of the EN are as follows:EN ISO 3170 DIN 51750-1, DIN 51750-2 and DIN EN ISO 3170EN ISO 3171 DIN EN ISO 3171EN ISO 5508 DIN EN ISO 5508National Annex NAStandards referred to(and not included in Normative references)DIN 51750-1 Sampling of petroleum products GeneralDIN 51750-2 Sa

5、mpling of liquid petroleum productsDIN EN ISO 3170 Petroleum liquids Manual sampling (ISO 3170 : 2004)DIN EN ISO 3171 Petroleum liquids Automatic pipeline sampling (ISO 3171 : 1988)DIN EN ISO 5508 Animal and vegetable fats and oils Analysis by gas chromatography of methyl esters offatty acids (ISO 5

6、508 : 1990)DEUTSCHE NORM June 2004DIN EN 14331 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 8www

7、din.dewww.beuth.de9573591Continued overleaf.Document comprises 9 pages.09.04G4G15G63G41G97G5English versionICS 75.080Liquid petroleum productsSeparation and characterisation of fatty acid methylesters (FAME) from middle distillate fuelsLiquid chromatography (LC)/gas chromatography (GC) method 2004.

8、 CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 14331 : 2004 EFlssige Minerallerzeugnisse Tren-nung und Bestimmung von Fettsure-Methylestern (FAME) aus Mitteldestil-laten Flssigchromatographie (LC)/Gaschromatographie (GC)This Europe

9、an Standard was approved by CEN on 2004-01-16.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning s

10、uch national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and

11、notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the N

12、etherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN 14331March 2004Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungProduits ptroliers liqu

13、ides Spara-tion et caractrisation des esters m-thyliques dacides gras (EMAG) dansles distillats moyens Mthode parchromatographie liquide (CL) et chro-matographie en phase gazeuse (CPG)Page 2EN 14331 : 2004Page23333344455556788Page 3EN 14331 : 2004Page 4EN 14331 : 2004Page 5EN 14331 : 2004Page 6EN 14331 : 2004Page 7EN 14331 : 2004Page 8EN 14331 : 2004

展开阅读全文
相关资源
  • DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdfDIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf
  • DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdfDIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf
  • DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdfDIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf
  • DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdfDIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf
  • DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdfDIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf
  • DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdfDIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf
  • DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdfDIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf
  • DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdfDIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf
  • DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdfDIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf
  • DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdfDIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf
  • 猜你喜欢
  • AECMA PREN 4243-2001 Aerospace Series Cast Acrylic Sheets Technical Specification Edition P 1《航空系列 铸件丙烯酸薄片技术规范.P1版》.pdf AECMA PREN 4243-2001 Aerospace Series Cast Acrylic Sheets Technical Specification Edition P 1《航空系列 铸件丙烯酸薄片技术规范.P1版》.pdf
  • AECMA PREN 4244-1995 Aerospace Series Heat Resisting Alloy FE-PM1708 Vacuum Arc Remelted Hardened and Tempered Bar a or D is Less Than or Equal to 200 mm 1000 MPa is Less Than or Et.pdf AECMA PREN 4244-1995 Aerospace Series Heat Resisting Alloy FE-PM1708 Vacuum Arc Remelted Hardened and Tempered Bar a or D is Less Than or Equal to 200 mm 1000 MPa is Less Than or Et.pdf
  • AECMA PREN 4245-1995 Aerospace Series Heat Resisting Alloy FE-PM1708 Vacuum Arc Remelted As Forged Forging Stock De is Less Than or Equal to 300 mm Edition P 1《航空系列 抗热合金FE-PM1708真空.pdf AECMA PREN 4245-1995 Aerospace Series Heat Resisting Alloy FE-PM1708 Vacuum Arc Remelted As Forged Forging Stock De is Less Than or Equal to 300 mm Edition P 1《航空系列 抗热合金FE-PM1708真空.pdf
  • AECMA PREN 4246-1995 Aerospace Series Heat Resisting Alloy CO-PH4101 Vacuum Melted as Forged Forging Stock De is Less Than or Equal to 360 mm Edition P 1《航空系列 抗热合金CO-PH4101真空熔制铸件De.pdf AECMA PREN 4246-1995 Aerospace Series Heat Resisting Alloy CO-PH4101 Vacuum Melted as Forged Forging Stock De is Less Than or Equal to 360 mm Edition P 1《航空系列 抗热合金CO-PH4101真空熔制铸件De.pdf
  • AECMA PREN 4247-2003 Aerospace Series Aluminium Alloy AL-P2024-T42 Plate 6mm less than a Less Than or Equal to 140 mm Edition P 2《航空系列 AL-P2024-T42型铝合金6mm小于或等于a小于或等于140mm的金属板.P2版》.pdf AECMA PREN 4247-2003 Aerospace Series Aluminium Alloy AL-P2024-T42 Plate 6mm less than a Less Than or Equal to 140 mm Edition P 2《航空系列 AL-P2024-T42型铝合金6mm小于或等于a小于或等于140mm的金属板.P2版》.pdf
  • AECMA PREN 4248-1996 Aerospace Series Nuts Anchor Self-Locking Fixed Single Lug with Counterbore in Heat Resisting Steel Silver Plated Classification  1 100 MPa (at Ambient Tempera.pdf AECMA PREN 4248-1996 Aerospace Series Nuts Anchor Self-Locking Fixed Single Lug with Counterbore in Heat Resisting Steel Silver Plated Classification 1 100 MPa (at Ambient Tempera.pdf
  • AECMA PREN 4249-1996 Aerospace Series Nuts Anchor Self-Locking Fixed Single Lug Reduced Series with Counterbore in Heat Resisting Steel Silver Plated Classification  1 100 MPa (at .pdf AECMA PREN 4249-1996 Aerospace Series Nuts Anchor Self-Locking Fixed Single Lug Reduced Series with Counterbore in Heat Resisting Steel Silver Plated Classification 1 100 MPa (at .pdf
  • AECMA PREN 4250-2001 Aerospace Series Nickel Base Alloy NI-B41001 Filler Metal for Brazing Amorphous Foil Edition P 2《航空系列 镍合金NI-B41001填充金属铜焊无定形金属薄片.P2版取代.P1版》.pdf AECMA PREN 4250-2001 Aerospace Series Nickel Base Alloy NI-B41001 Filler Metal for Brazing Amorphous Foil Edition P 2《航空系列 镍合金NI-B41001填充金属铜焊无定形金属薄片.P2版取代.P1版》.pdf
  • AECMA PREN 4251-1997 Aerospace Series Nuts Anchor Self-Locking Fixed 90 Degree Corner with Counterbore in Heat Resisting Steel Silver Plated Classification  1 100 MPa (at Ambient T.pdf AECMA PREN 4251-1997 Aerospace Series Nuts Anchor Self-Locking Fixed 90 Degree Corner with Counterbore in Heat Resisting Steel Silver Plated Classification 1 100 MPa (at Ambient T.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > DIN

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1