1、November 2008DEUTSCHE NORM English price group 16No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.190!$TJA“1493930ww
2、w.din.deDDIN EN 14846Building hardware Locks and latches Electromechanically operated locks and striking plates Requirementsand test methodsEnglish version of DIN EN 14846:2008-11Baubeschlge Schlsser Elektromechanische Schlsser und Schliebleche Anforderungen und PrfverfahrenEnglische Fassung DIN EN
3、14846:2008-11See start of validitywww.beuth.deDocument comprises 45 pagesDIN EN 14846:2008-11 2 Start of validity This standard is due to take effect on 1 May 2009. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been liste
4、d in the Bundesanzeiger (German Federal Gazette) and from the date given therein. National foreword This standard has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling” (Secretariat: AFNOR, France), Working Group WG 4 “Building hardware”
5、(lead-management: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee NA 005-09-43 AA Riegel- und Fallen-schlsser. This standard, together with DIN EN 12209, Mechanica
6、lly operated locks, latches and locking plates, and prEN 15685, Multipoint locks and their locking plates, completes the European Standards series dealing with locks and striking/locking plates. Dimensions of locks are given in DIN 18250 and in the DIN 18251 standards series. The draft of this stand
7、ard was published as E DIN EN 12209-3:1998-07. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14846August 2008ICS 91.190English VersionBuilding hardware - Locks and latches - Electromechanicallyoperated locks and striking plates - Requirements and testmethodsQuincaillerie pour le btiment - Serrur
8、es et becs de cane -Serrures et gches lectromcaniques - Exigences etmthodes dessaiBaubeschlge - Schlsser - Elektromechanische Schlsserund Schliebleche - Anforderungen und PrfverfahrenThis European Standard was approved by CEN on 18 July 2008.CEN members are bound to comply with the CEN/CENELEC Inter
9、nal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member
10、.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are
11、 the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerla
12、nd and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14846
13、:2008: EEN 14846:2008 (E) 2 Contents Page Foreword. 4 1 Scope 5 2 Normative references . 5 3 Terms, definitions and symbols 6 4 Classification. 6 4.1 General. 6 4.2 Classification. 7 4.3 Category of use (first digit) 7 4.4 Durability and load on latchbolt (second digit) . 7 4.5 Door mass and closing
14、 force (third digit). 8 4.6 Suitability for use on fire/smoke doors (fourth digit) 9 4.7 Safety (fifth digit). 9 4.8 Corrosion, temperature and humidity (sixth digit) 9 4.9 Security (seventh digit) 10 4.10 Security - electrical function (eighth digit). 10 4.11 Security - electrical manipulation (nin
15、th digit). 11 5 Requirements 12 5.1 General. 12 5.2 Category of use . 12 5.3 Durability 13 5.4 Door mass and closing force. 14 5.5 Suitability for use on fire/smoke doors 14 5.6 Safety 14 5.7 Corrosion, temperature and humidity requirements. 14 5.8 Security requirements 15 5.9 Security Electrical fu
16、nction Status indication . 15 5.10 Security Electrical manipulation 15 5.11 Requirements for product information. 16 6 Test methods. 17 6.1 Test procedure 17 6.2 Category of use tests 18 6.3 Durability tests 19 6.4 Door mass and closing force. 20 6.5 Fire/smoke resistance tests. 20 6.6 Safety 20 6.7
17、 Corrosion, temperature and humidity tests . 21 6.8 Security tests. 22 6.9 Security Electrical function tests Status indication 22 6.10 Security Electrical manipulation tests. 22 7 Marking 23 8 Evaluation of conformity 23 8.1 Initial type test . 23 8.2 Sampling, testing and conformity criteria 24 8.
18、3 Factory production control 25 8.4 Periodic testing . 31 8.5 Annual testing . 31 Annex A (normative) Fire/smoke test requirements. 32 Annex B (normative) Test sampling and sequencing 33 Annex C (normative) Installation and fixing instructions 35 DIN EN 14846:2008-11 EN 14846:2008 (E) 3 Annex ZA (no
19、rmative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive (89/106/EEC) . 37 Bibliography . 43 DIN EN 14846:2008-11 EN 14846:2008 (E) 4 Foreword This document (EN 14846:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutt
20、ers, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2009, and conflicting national standards shall be w
21、ithdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate gi
22、ven to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard has been prepared under mandate M
23、/101 “Doors, windows, shutters, gates and related building hardware” (amended) given to CEN by the European Commission and the European Free Trade Association. No existing European Standard is superseded. This European Standard is one of a series of European Standards dedicated to building hardware
24、products. Complementing this European Standard is a European Standard for mechanically operated locks, latches and locking plates (EN 12209) and a draft European Standard for mechanically operated multi-point locks (prEN 15685). Electromechanical operated locks and striking plates used in fire/smoke
25、 door assemblies require additional attributes in order to comply with the Essential Requirements CPD 89/106/EEC “Safety in case of fire“ either independently or as a part of a complete assembly. Additional requirements are specified in Annex A and Annex ZA. The performance tests incorporated in thi
26、s European Standard are considered to be replicable and as such will provide a consistent and objective assessment of the performance of these products throughout CEN member states. Electromechanically operated locks and strikes plates to this standard are designed to be installed on doors in buildi
27、ngs (fixed installation). Such doors are not covered by the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC or Restriction of the Use of Certain Hazardous Substances in EEE (RoHS) Directive 2002/95/EC. According to the CEN/CENELEC Internal Regulations, the national standards or
28、ganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
29、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 14846:2008-11 EN 14846:2008 (E) 5 1 Scope This European Standard specifies requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of el
30、ectromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings. Requirements relating to the purely mechanical feature of products included in this European Standard (e.g. resistance to drilling/side load) are covered by EN 12209. This European Stand
31、ard covers electromechanically operated locks and striking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This document is not applicable to el
32、ectrically powered hold-open devices (EN 1155), electrically controlled panic exit systems (prEN 13633) or electrically controlled emergency exit systems (prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders (EN 1303), handles (EN 1906), locks for windows, pad
33、locks (EN 12320), locks for safes (EN 1300), furniture locks or prison locks, nor does it apply to cover operating and identification devices (such as mechanical cylinders, intelligent cards, digit codes, magnetic cards). This European Standard does not, for the time being, apply to electromagnetic
34、door locks but these devices will be considered for inclusion in the first revision of this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated reference
35、s, the latest edition of the referenced document (including any amendments) applies. EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Part 1: Fire resistance test for doors and shutter assemblies and openable windo
36、ws EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies EN 1670:2007, Building hardware Corrosion resistance Requirements and test methods EN 12209:2003, Bui
37、lding hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods EN 60068-2-1:2007, Environmental testing Part 2-1: Tests Tests A: Cold (IEC 60068-2-1:2007) EN 60068-2-2:2007, Environmental testing Part 2-2: Tests Test B: Dry heat (IEC 60068-2-2:
38、2007) EN 60068-2-30, Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 + 12 hour cycle) (IEC 60068-2-30:2005) EN 61000-4-2:1995, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity test Basic EMC publication (
39、IEC 61000-4-2:1995) EN 61000-4-3:2006, Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006) DIN EN 14846:2008-11 EN 14846:2008 (E) 6 EN 61000-4-4:2004, Electromagnetic compatibility (EMC)
40、Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test (IEC 61000-4-4:2004) EN 61000-4-5:2006, Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test (IEC 61000-4-5:2005) EN 61000-4-11, Electromagnetic compatibility (E
41、MC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004) EN 61000-4-29, Electromagnetic Compatibility (EMC) Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations o
42、n d.c. input power port immunity tests (IEC 61000-4-29:2000) EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) 3 Terms, definitions and symbols For the purposes of this document, the symbols and units given in EN 12209:2003 and the following terms and definitions apply. 3.1 e
43、lectromechanical lock(s) device using electrically operated means to effect or enable locking and/or unlocking 3.2 electromechanical strike(s) locking plate using electrically operated means to effect or enable locking and/or unlocking 3.3 electric door magnet device which uses only the magnetic att
44、raction to effect or enable locking and/or unlocking 3.4 rated supply voltage nominal voltage for which the device is intended 3.5 deadbolt bolt of any kind that can be deadlocked 4 Classification 4.1 General 4.1.1 Mechanically operated locks and latches shall be classified according to the nine cha
45、racter classification system described in 4.3 to 4.11. 4.1.2 All locks regardless of classification shall meet the requirements of 5.1.1 and 5.1.2. DIN EN 14846:2008-11 EN 14846:2008 (E) 7 4.2 Classification for electromechanically operated locks and striking plates Electric locks and electric strik
46、es shall be classified according to the following nine digit coding system described in 4.3 to 4.11. Table 1 Classification 1 2 3 4 5 6 7 8 9 Category of use Durabilityand load on latchbolt Door massandclosing force Suitability for use on fire/smoke doors Safety Corrosion resistance,temperature and
47、humiditySecurity and drillresistance Securityelectrical function Securityelectrical manipulation 4.3 Category of use (first digit) Three grades are identified in accordance with requirements stated in 5.2.1 to 5.2.4. grade 1 for use by people with a high incentive to exercise care and with a small c
48、hance of misuse, e.g. residential doors. grade 2 for use by people with some incentive to exercise care but where there is some chance of misuse, e.g. office doors. grade 3: for use by the public where there is little incentive to exercise care and where there is a high chance of misuse, e.g. doors
49、in public buildings. 4.4 Durability and load on latchbolt (second digit) Twelve grades of durability and load on mechanically or electrically operated latchbolt are identified. grade A 50 000 test cycles no load on latchbolt; grade B 100 000 test cycles no load on latchbolt; grade C 200 000 test cycles no load on latchbolt; grade F 50 000 test cycles 10 N load on latchbolt; grade G 100 000 test cycles 10 N load on latchbolt; grade H 200 000 test cycles 10 N load on latchbolt
