1、August 2013 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 71.100.80!%(27“2051520www.din.deDDIN EN 15031Chemicals used for treatment of swimming pool water Aluminium based coagulants;English version EN 15031:2013,English translation of DIN EN 15031:2013-08Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser Flockungsmittel auf Aluminiumbasis;Englisc
3、he Fassung EN 15031:2013,Englische bersetzung von DIN EN 15031:2013-08Produits chimiques utiliss pour le traitement de leau des piscines Coagulants base daluminium;Version anglaise EN 15031:2013,Traduction anglaise de DIN EN 15031:2013-08SupersedesDIN EN 15031:2006-08www.beuth.deDocument comprises 3
4、1 pagesIn case of doubt, the German-language original shall be considered authoritative.07.13 DIN EN 15031:2013-08 2 A comma is used as the decimal marker. National foreword This document (EN 15031:2013) has been prepared by Technical Committee CEN/TC 164 “Water supply” (Secretariat: AFNOR, France).
5、 The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (Water Practice Standards Committee), Working Committee NA 119-04-02 AA Wasseraufbereitung. Amendments This standard differs from DIN EN 15031:2006-08 as follows: a) specifications concerning hazard and safe
6、ty related symbols have been brought in line with the “Globally Harmonized System of Classification, Labelling and Packaging of Chemicals (GHS)” (Global harmonisiertes System zur Einstufung und Kennzeichnung von Chemikalien). Previous editions DIN EN 15031: 2006-08 EUROPEAN STANDARD NORME EUROPENNE
7、EUROPISCHE NORM EN 15031 May 2013 ICS 71.100.80 Supersedes EN 15031:2006English Version Chemicals used for treatment of swimming pool water - Aluminium based coagulants Produits chimiques utiliss pour le traitement de leau des piscines - Coagulants base daluminium Produkte zur Aufbereitung von Schwi
8、mm- und Badebeckenwasser - Flockungsmittel auf AluminiumbasisThis European Standard was approved by CEN on 21 March 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
9、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l
10、anguage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Den
11、mark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTE
12、E FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15031:2013: EEN 15031:2013 (E) 2 Contents
13、 Page Foreword . 3 Introduction 4 1 Scope 5 2 Normative references . 5 3 Description . 5 3.1 Aluminium sulfate 5 3.2 Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) . 8 3.3 Sodium aluminate 11 3.4 Polyaluminium chloride hy
14、droxide and polyaluminium chloride hydroxide sulfate . 14 4 Purity criteria 16 4.1 General . 16 4.2 Composition of commercial product . 17 4.3 Impurities and main by-products 17 4.4 Chemical parameters . 18 5 Test methods 18 5.1 Sampling . 18 5.2 Analyses . 19 6 Labelling - transportation - storage
15、. 20 6.1 Means of delivery . 20 6.2 Risk and safety labelling in accordance with the EU directives . 20 6.3 Transportation regulations and labelling 23 6.4 Marking . 24 6.5 Storage . 24 Annex A (informative) General information on aluminium based coagulants 26 A.1 Origin 26 A.2 Use 26 Annex B (norma
16、tive) General rules relating to safety . 28 B.1 Rules for safe handling and use 28 B.2 Emergency procedures 28 Bibliography 29 DIN EN 15031:2013-08 EN 15031:2013 (E) 3 Foreword This document (EN 15031:2013) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which
17、is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by November 2013. Attention is drawn to the pos
18、sibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15031:2006. Significant technical differences between this edition and EN 15031:2006 ar
19、e as follows: Updating of subclause 6.2 in line with current legislation According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denm
20、ark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15031:2
21、013-08 EN 15031:2013 (E) 4 Introduction In respect of potential adverse effects on the quality of water for swimming pools, caused by the products covered by this European Standard: a) this European Standard provides no information as to whether the products may be used without restriction in any of
22、 the Member States of the EU or EFTA; b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of these products remain in force. NOTE Conformity with this European Standard does not confer or
23、 imply acceptance or approval of the products in any of the Member States of the EU or EFTA. The use of the products covered by this European Standard is subject to regulation or control by National Authorities. DIN EN 15031:2013-08 EN 15031:2013 (E) 5 1 Scope This European Standard is applicable to
24、 aluminium based coagulants (aluminium sulfate, aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric), aluminium chloride hydroxide sulfate (monomeric), sodium aluminate and polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate) used directly or for the pro
25、duction of formulations for treatment of water for swimming pools. It describes the characteristics of aluminium based coagulants and specifies the requirements and the corresponding test methods for aluminium based coagulants. It gives information on their use in swimming pool water treatment. It a
26、lso determines the rules relating to safe handling and use (see Annex B). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated refe
27、rences, the latest edition of the referenced document (including any amendments) applies. EN 1302, Chemicals used for treatment of water intended for human consumption Aluminium-based coagulants Analytical methods ISO 3165, Sampling of chemical products for industrial use Safety in sampling ISO 6206
28、, Chemical products for industrial use Sampling Vocabulary ISO 8213, Chemical products for industrial use Sampling techniques Solid chemical products in the form of particles varying from powders to coarse lumps 3 Description 3.1 Aluminium sulfate 3.1.1 Identification 3.1.1.1 Chemical name Aluminium
29、 sulfate. 3.1.1.2 Synonym or common names Aluminium sulfate, cake alum, alum. NOTE In English the generic term “alum“ is imprecise and is deprecated and in German the term “Alaun“ is misleading. 3.1.1.3 Relative molecular mass 342,14 for Al2(SO4)3. 3.1.1.4 Empirical formula Al2(SO4)3. DIN EN 15031:2
30、013-08 EN 15031:2013 (E) 6 3.1.1.5 Chemical formula Al2(SO4)3.nH2O. 3.1.1.6 CAS Registry Number 1)Al2(SO4)3: 10043-01-3. Al2(SO4)3.16 H2O : 16828-11-8. Al2(SO4)3.18 H2O : 7784-31-8. 3.1.1.7 EINECS reference 2)Al2(SO4)3: 233-135-0. 3.1.2 Commercial forms Aluminium sulfate is available in solid hydrat
31、ed forms, with different particle sizes (slabs, kibbled, ground, granulated) and in aqueous solutions. 3.1.3 Physical properties 3.1.3.1 Appearance The product is a white solid or colourless to yellow, clear liquid. 3.1.3.2 Density The density of a typical aluminium sulfate solution is given in Tabl
32、e 1 and varies depending on the concentration of the active matter (aluminium content), expressed in grams per kilogram of solution (Al g/kg). Table 1 Density of solution Al g/kg of solution Density at 15 C g/ml 40,8 1,310 41,6 1,315 42,5 1,320 43,3 1,325 44,2 1,330 45,0 1,335 3.1.3.3 Solubility The
33、 theoretical limit of active matter content for a typical solution is given in Table 2. 1) Chemical Abstracts Service Registry Number. 2) European Inventory of Existing Commercial Chemical Substances. DIN EN 15031:2013-08 EN 15031:2013 (E) 7 Table 2 Solubility Temperature Active matter in Al C g/kg
34、of solution - 1 44,7 24 44,8 The practical limit of solubility depends on the temperature and the device used for solubilisation of the solid form (slabs, kibbled, ground or granulated). An indication of practical limits is given in Table 3. Table 3 Indication of practical limits of solubility Tempe
35、rature C Active matter Al g/kg of solution Solubility in grams solid form (containing Al 90 g/kg of solid) per kilogram of solution 15 37 410 3.1.3.4 Vapour pressure at 20 C Not known. 3.1.3.5 Boiling point at 100 kPa 3)Not known. 3.1.3.6 Crystallisation point The crystallisation point of aluminium
36、sulfate varies, depending on the concentration of the active matter. For example: - 7 C for a typical solution of aluminium content of 42,4 g/kg of solution. 3.1.3.7 Specific heat Not known. 3.1.3.8 Viscosity (dynamic) The viscosity of aluminium sulfate solution varies greatly, depending on the conc
37、entration of the active matter. For a typical solution of aluminium content of 42,4 g/kg of solution, the viscosity is given in Table 4. 3) 100 kPa = 1 bar. DIN EN 15031:2013-08 EN 15031:2013 (E) 8 Table 4 Viscosity Temperature C Viscosity mPa.s 0 40,0 10 26,5 20 18,6 30 13,2 40 8,8 3.1.3.9 Critical
38、 temperature Not applicable. 3.1.3.10 Critical pressure Not applicable. 3.1.3.11 Physical hardness Not applicable. 3.1.4 Chemical properties Aluminium sulfate is an acidic hydrated salt or solution. Very dilute solutions hydrolyse and form a precipitate of aluminium hydroxide. Since aluminium compou
39、nds are amphoteric in nature, the solubility of aluminium depends on the pH value and the product should be used within an appropriate pH range. 3.2 Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) 3.2.1 Identification 3.2.
40、1.1 Chemical name a) aluminium chloride (monomeric); b) aluminium chloride hydroxide (monomeric); c) aluminium chloride hydroxide sulfate (monomeric). 3.2.1.2 Synonym or common names a) aluminium chloride; b) aluminium chloride hydroxide; c) aluminium chloride hydroxide sulfate. DIN EN 15031:2013-08
41、 EN 15031:2013 (E) 9 3.2.1.3 Relative molecular mass 133,3 for AlCl3. 3.2.1.4 Empirical formula a) AlCl3; b) Al(OH)aClbwith (a + b) = 3 and a less than or equal to 1,05; c) Al(OH)aClb(SO4)cwith (a + b + 2c) = 3 and a less than or equal to 1,05. 3.2.1.5 Chemical formula Variable (see 3.1.4). 3.2.1.6
42、CAS Registry Number 4)a) 7446-70-0; b) 1) a and b variable: 1327-41-9 with a less than or equal to 1,05; 2) a = 1, b = 2: 14215-15-7; c) a, b and c variable: 39290-78-3 with a less than or equal to 1,05. 3.2.1.7 EINECS reference 5)a) 231-208-1; b) 1) 215-477-2; 2) 238-071-7; c) 254-400-7. 3.2.2 Comm
43、ercial forms Aluminium chloride in the form of hexahydrate is available as crystals. Liquid forms of aluminium chloride, aluminium chloride hydroxide and aluminium chloride hydroxide sulfate (monomeric) are available as solutions or suspensions. 3.2.3 Physical properties 3.2.3.1 Appearance The produ
44、ct is colourless to yellow. 4) Chemical Abstracts Service Registry Number. 5) European Inventory of Existing Commercial Chemical Substances. DIN EN 15031:2013-08 EN 15031:2013 (E) 10 3.2.3.2 Density The density depends on the particular composition, especially the aluminium ion content, expressed as
45、 mass fraction of aluminium (Al ) in %. Typical values for solutions: a) aluminium chloride: 1,3 g/ml for 5,8 % Al; b) aluminium chloride hydroxide: 1,35 g/ml to 1,40 g/ml for 9,5 % Al; c) aluminium chloride hydroxide sulfate: 1,18 g/ml to 1,22 g/ml for 5,3 % Al; 1,18 g/ml for 4,2 % Al. 3.2.3.3 Solu
46、bility Aluminium chloride, aluminium chloride hydroxide and aluminium chloride hydroxide sulfate (monomeric) are fully miscible with water. NOTE Depending on the particular product, dilute solutions can hydrolyze and form a precipitate. 3.2.3.4 Vapour pressure Not known. 3.2.3.5 Boiling point at 100
47、 kPa6)Not known. 3.2.3.6 Crystallisation point Typical values for solutions: a) aluminium chloride: - 20 C for 5,8 % Al; b) aluminium chloride hydroxide: - 20 C for 9,5 % Al; - 20 C for 12,4 % Al; c) aluminium chloride hydroxide sulfate: 10 C to - 15 C for 5,3 % Al; 5 C for 4,2 % Al. 3.2.3.7 Specifi
48、c heat Not known. 6) 100 kPa = 1 bar. DIN EN 15031:2013-08 EN 15031:2013 (E) 11 3.2.3.8 Viscosity (dynamic) Typical values for solutions at 20 C: a) aluminium chloride solution: 10 mPa.s for 5,8 % Al; b) aluminium chloride hydroxide: 10 mPa.s to 50 mPa.s for 9,5 % Al; c) aluminium chloride hydroxide sulfate: 3 mPa.s to 10 mPa.s for 5,3 % Al. 3.2.3.9 Critical temperature Not applicable. 3.2.3.10 Critical pressure Not applicable. 3.2.3.11 Physical hardness Not applicable. 3.3 Sodium alumina
