1、September 2017 English price group 31No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 27.160; 91.140.10!%mtU“2748150
2、www.din.deDIN EN 15316-4-3Energy performance of buildings Method for calculation of system energy requirements and system efficiencies Part 43: Heat generation systems, thermal solar and photovoltaic systems,Module M383, M883, M1183;English version EN 1531643:2017,English translation of DIN EN 15316
3、-4-3:2017-09Energetische Bewertung von Gebuden Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen Teil 43: Wrmeerzeugungssysteme, thermische Solaranlagen und Photovoltaikanlagen, Modul M383, M883, M1183;Englische Fassung EN 1531643:2017,Englische bersetzung von DIN EN 15
4、316-4-3:2017-09Performance nergtique des btiments Mthode de calcul des besoins nergtiques et des rendements des systmes Partie 43: Systmes de gnration de chaleur, systmes solaires thermiques et systmes photovoltaques, Module M383, M883, M1183;Version anglaise EN 1531643:2017,Traduction anglaise de D
5、IN EN 15316-4-3:2017-09SupersedesDIN EN 1531643:200710 andDIN EN 1531646:200907www.beuth.deDocument comprises 105 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.08.17 DIN EN 15316-4-3:2017-09 2 A comma is used as the decimal m
6、arker. National foreword This document (EN 15316-4-3:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings” (Secretariat: DIN, Germany). DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss He
7、iz- und Raumlufttechnik sowie deren Sicherheit (DIN Standards Committee Heating and Ventilation Technology and their Safety), Working Committee NA 041-05-01 AA “Energy performance of technical building systems (Mirror Committee to ISO/TC 205 “Building environment design”)”. This standard is part of
8、the standard series DIN EN 15316 and has been prepared under the EPBD mandate M/480. DIN EN 15316-4-3 is a European Standard and CEN/TR 15316-6-6 is the accompanying Technical Report to this standard containing further informative contents for assessing the energy performance of a building. In Germa
9、ny, the Directive on the energy performance of buildings (2010/31/EU) of the European Parliament and the European Council is primarily implemented by national energy conservation law. National energy conservation law refers to dated national and European standards and national prestandards that have
10、 been specified to be implemented in Germany. In Germany, the application of this standard in relation with national energy conservation law is defined by provisions in this law. Provisions of German energy conservation law cannot be systematically fully and identically implemented with the set of s
11、tandards under the EPBD mandate M/480 and the therein referenced International and European Standards. When applying the standards of the mandate, accordance with German energy conservation law cannot be achieved, whether in terms of the procedure, the result of assessment of the result. Currently,
12、the set of standards of the EPBD mandate M/480 is not applicable for the purposes of German energy conservation law, even if references to national regulations in the respective national annexes are considered. Amendments This standard differs from DIN EN 15316-4-3:2007-10 and DIN EN 15316-4-6:2009-
13、07 as follows: a) Method B has been extended, e.g. to include full support of solar systems with integrated back-up heating and to take into account the effect of heat storage heat losses; b) Method 3 has been included to broaden the applicability of the solar thermal methods to calculations with an
14、 hourly time step; c) the revision brings the method in conformity with the methods used in Ecodesign and energy labelling (CEN mandate 495); d) a new method has been included to support input with an hourly time step; e) the standard has been editorially revised. Previous editions DIN EN 15316-4-3:
15、 2007-10 DIN EN 15316-4-6: 2007-10, 2009-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15316-4-3 May 2017 ICS 27.160; 91.140.10 Supersedes EN 15316-4-3:2007, EN 15316-4-6:2007English Version Energy performance of buildings - Method for calculation of system energy requirements and system e
16、fficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 4-3 : Systmes de gnration de chaleur, systmes solaires thermique
17、s et systmes photovoltaques, Module M3-8-3, M8-8-3, M11-8-3 Energetische Bewertung von Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-3: Wrmeerzeugungssysteme, thermische Solaranlagen und Photovoltaikanlagen, Modul M3-8-3, M8-8-3, M11-8-3 This Euro
18、pean Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
19、concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN membe
20、r into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fran
21、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPI
22、SCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15316-4-3:2017 EEN 15316-4-3:2017 (E) 2 Contents Page European foreword . 7 Introduction
23、 8 1 Scope . 11 2 Normative references . 14 3 Terms and definitions 14 3.1 Thermal solar systems . 14 3.2 Photovoltaic systems 16 4 Symbols and abbreviations 16 4.1 Symbols 16 4.2 Subscripts 17 5 Description of the methods 18 5.1 Method 1 solar thermal applications, using system test data 18 5.2 Met
24、hod 2 monthly solar thermal applications, using component test data 19 5.3 Method 3 hourly solar thermal applications 19 5.4 Method 4 photovoltaic - yearly method 19 5.5 Method 5 photovoltaic - monthly method 19 5.6 Method 6 photovoltaic - hourly method . 19 6 Methods . 19 6.1 Solar thermal applicat
25、ions . 19 6.1.1 Method 1 using system test data . 19 6.1.2 Method 2 monthly, using component specifications 24 6.1.3 Method 3 hourly, using component specifications . 36 6.2 Solar photovoltaic systems . 42 6.2.1 General . 42 6.2.2 Method 4 - photovoltaic yearly method 42 6.2.3 Method 5 - photovoltai
26、c monthly method 45 6.2.4 Method 6 - photovoltaic hourly method . 48 7 Quality control 53 7.1 Solar thermal applications . 53 7.1.1 Method 1 using system test data . 53 7.1.2 Method 2 monthly, using component specifications 53 7.1.3 Method 3 hourly, using component specifications . 53 7.2 Solar phot
27、ovoltaic applications 53 7.2.1 Method 4 photovoltaic - yearly method 53 7.2.2 Method 5 photovoltaic - monthly method 53 7.2.3 Method 6 photovoltaic - hourly method . 53 8 Compliance check. 54 8.1 Solar thermal applications . 54 8.1.1 Method 1 using system test data . 54 8.1.2 Method 2 monthly, using
28、 component specifications 54 8.1.3 Method 3 hourly, using component specifications . 54 8.2 Solar photovoltaic applications 54 8.2.1 Method 4 photovoltaic - yearly method 54 DIN EN 15316-4-3:2017-09 EN 15316-4-3:2017 (E) 3 8.2.2 Method 5 photovoltaic - monthly method 54 8.2.3 Method 6 photovoltaic -
29、 hourly method 54 Annex A (normative) Template for the specification of application data . 55 A.1 Method 1 using system test data 55 A.1.1 Product technical data 55 A.1.2 System design data . 55 A.1.3 Operating conditions . 55 A.2 Method 2 monthly, using component specifications 55 A.2.1 Product tec
30、hnical data 55 A.2.1.1 Collector . 55 A.2.1.2 Collector pump 56 A.2.1.3 Heat storage 57 A.2.2 System design data . 58 A.2.2.1 Type of service . 58 A.2.2.2 Location of heat storage tank . 59 A.2.2.3 Type solar system layout . 59 A.2.2.4 Correction factor collector orientation and shadowing . 59 A.2.2
31、.5 Collector loop overall heat loss coefficient . 60 A.2.2.6 Efficiency of the collector loop . 60 A.2.2.7 Collector pump operation time . 61 A.2.2.8 Pipe insulation back up heater loop 61 A.2.2.9 Back up heater operation 61 A.2.2.10 Space heating distribution return Heat storage . 62 A.2.2.11 Recov
32、erable part of the heat losses 62 A.2.2.12 Correlation factors 62 A.2.2.13 Correction factor 63 A.2.2.14 Air temperature heated room . 63 A.2.2.15 Domestic hot water temperature . 63 A.2.3 Operating conditions . 64 A.2.3.1 Solar irradiance . 64 A.2.3.2 Cold water and outside air temperature 64 A.2.3
33、.3 Heat use for water heating 65 A.2.3.4 Design temperature settings 65 A.2.3.5 Back-up heaters. 65 A.3 Method 3 hourly, using component specifications 66 A.3.1 Product technical data 66 A.3.1.1 General . 66 DIN EN 15316-4-3:2017-09 EN 15316-4-3:2017 (E) 4 A.3.1.2 Collector 66 A.3.1.3 Collector pump
34、 and control 66 A.3.2 System design data 67 A.3.2.1 Collector tilt and orientation . 67 A.3.2.2 Installed collector area 67 A.3.2.3 Solar loop mass flow rate 67 A.3.2.4 Location of the collector loop piping . 67 A.3.2.5 Heat losses of the collector loop . 68 A.3.3 Calculations 68 Annex B (informativ
35、e) Default application data 69 B.1 Method 1 using system test data . 69 B.1.1 Product technical data . 69 B.1.2 System design data 69 B.1.3 Operating conditions 69 B.2 Method 2 monthly, using component specifications 69 B.2.1 Product technical data . 69 B.2.1.1 Collector 69 B.2.1.2 Collector pump 70
36、 B.2.1.3 Heat storage . 71 B.2.2 System design data 72 B.2.2.1 Type of service 72 B.2.2.2 Location of heat storage tank 73 B.2.2.3 Type solar system layout . 73 B.2.2.4 Correction factor collector orientation and shadowing . 73 B.2.2.5 Collector loop overall heat loss coefficient . 74 B.2.2.6 Effici
37、ency of the collector loop 74 B.2.2.7 Collector pump operation time . 75 B.2.2.8 Pipe insulation back up heater loop 75 B.2.2.9 Back up heater operation 75 B.2.2.10 Space heating distribution return Heat storage 76 B.2.2.11 Recoverable part of the heat losses 76 B.2.2.12 Correlation factors 76 B.2.2
38、.13 Correction factor . 77 B.2.2.14 Air temperature heated room 77 B.2.2.15 Domestic hot water temperature 77 B.2.3 Operating conditions 77 DIN EN 15316-4-3:2017-09 EN 15316-4-3:2017 (E) 5 B.2.3.1 Solar irradiance . 77 B.2.3.2 Cold water and outside air temperature 78 B.2.3.3 Heat use for water heat
39、ing 79 B.2.3.4 Design temperature settings 79 B.2.3.5 Back-up heaters. 79 B.3 Method 3 hourly, using component specifications 80 B.3.1 Product technical data 80 B.3.1.1 General . 80 B.3.1.2 Collector . 80 B.3.1.3 Collector pump and control 80 B.3.2 System design data . 81 B.3.2.1 Collector tilt and
40、orientation 81 B.3.2.2 Installed collector area . 81 B.3.2.3 Solar loop mass flow rate . 81 B.3.2.4 Location of the collector loop piping . 81 B.3.2.5 Heat losses of the collector loop 82 B.3.3 Calculations. 82 Annex C (informative) Solar irradiation on the photovoltaic modules 83 C.1 Annual global
41、solar irradiation . 83 C.2 Tilt and orientation conversion factor for calculation of the energy radiation on the photovoltaic module surface 83 C.3 Peak power . 85 C.4 System performance factor . 85 Annex D (normative) Method selection . 86 D.1 Solar thermal applications 86 D.2 Solar photovoltaic ap
42、plications . 86 Annex E (informative) Standards linked to solar systems and components . 88 Annex F (informative) Method 2 implementation for Ecodesign and Energy labelling . 91 F.1 Introduction 91 F.2 Prescribed settings for method 2 91 F.3 Calculation of auxiliary electricity consumption 93 F.4 De
43、termination of the water heater performance parameters without solar contribution 93 F.4.1 General . 93 F.4.2 External boiler-type backup heater . 94 F.4.3 External heat pump backup heater 94 F.4.4 Integrated fuel fired heater 95 DIN EN 15316-4-3:2017-09 EN 15316-4-3:2017 (E) 6 F.4.5 Electrical imme
44、rsion heater . 96 F.5 Conversion of parameters in this EN to parameters in the regulations . 96 Annex ZA (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) No 811/2013 aimed to be covered 100 Annex ZB (informative)
45、Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) No 812/2013 aimed to be covered 101 Annex ZC (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 814/2013 ai
46、med to be covered . 102 Bibliography . 103 DIN EN 15316-4-3:2017-09 EN 15316-4-3:2017 (E) 7 European foreword This document (EN 15316-4-3:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings”, the secretariat of which is held by DIN.
47、 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that som
48、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15316-4-3:2007 and EN 15316-4-6:2007. This document has been prepared under a mandate given to CEN by th
49、e European Commission and the European Free Trade Association, and supports essential requirements of EU Directives 2010/30/EU and 2009/125/EC. For relationship with EU Directives, see informative Annexes ZA, ZB, and ZC, which are integral parts of this document. The main changes compared to EN 15316-4-3:2007 and EN 15316-4-6:2007 are: a) extensions to the former Method B, e.
