1、March 2016 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.310; 91.060.50!%Mc“2429964www.d
2、in.deDIN EN 1629Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under dynamic loading;English version EN 1629:2011+A1:2015,English translation of DIN EN 1629:2016-03Tren, Fenster, Vorhangfassaden, Gitterelemente u
3、nd Abschlsse Einbruchhemmung Prfverfahren fr die Ermittlung der Widerstandsfhigkeit unter dynamischer Belastung;Englische Fassung EN 1629:2011+A1:2015,Englische bersetzung von DIN EN 1629:2016-03Blocs-portes pour pitons, fentres, faades rideaux, grilles et fermetures Rsistance leffraction Mthode des
4、sai pour la dtermination de la rsistance la charge dynamique;Version anglaise EN 1629:2011+A1:2015,Traduction anglaise de DIN EN 1629:2016-03SupersedesDIN EN 1629:2011-09www.beuth.deDocument comprises 37 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be
5、considered authoritative.03.16 DIN EN 1629:2016-03 2 A comma is used as the decimal marker. National foreword This document (EN 1629:2011+A1:2015) has been prepared by Technical Committee CEN/TC 33 Tren, Tore, Fenster, Abschlsse, Baubeschlge und Vorhangfassaden (Secretariat: AFNOR, France). The resp
6、onsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-09-02 AA Einbruchschutz. This consolidated version modifies EN 1629:2011-09 in the following clauses: 5.1 (Test specimen General), 6.3 (
7、Impact test procedure), 7 (Expression of results) and in Annex A (Figure A.21 replaced). Amendments This standard differs from DIN EN 1629:2011-09 as follows: a) in 5.1, information regarding vertical installation has been added and the test procedure is now described in greater detail; b) the test
8、procedure is described in greater detail; c) in Clause 7, information is given regarding the moving direction of the gauge; d) Figure A.21 in Annex A has been replaced. Previous editions DIN 18103: 1983-11 DIN V 18054: 1989-09, 1991-12 DIN V 18103: 1992-03 DIN V ENV 1629: 1999-04 DIN EN 1629: 2011-0
9、9 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1629:2011+A1 December 2015 ICS 13.310; 91.060.50 Supersedes EN 1629:2011English Version Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic load
10、ing Blocs-portes pour pitons, fentres, faades rideaux, grilles et fermetures - Rsistance leffraction - Mthode dessai pour la dtermination de la rsistance la charge dynamique Tren, Fenster, Vorhangfassaden, Gitterelemente und Abschlsse - Einbruchhemmung - Prfverfahren fr die Ermittlung der Widerstand
11、sfhigkeit unter dynamischer Belastung This European Standard was approved by CEN on 2 December 2010 and includes Amendment 1 approved by CEN on 17 November 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
12、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, F
13、rench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgar
14、ia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turk
15、ey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. R
16、ef. No. EN 1629:2011+A1:2015 EEN 1629:2011+A1:2015 (E) 2 Contents Page European foreword .4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Apparatus . 6 4.1 Test rig 6 4.2 Pendulum impactor 7 4.3 Suspension system 7 4.4 Sub-frame . 7 4.5 Measuring equipment 7 5 Test specimen . 8 5.
17、1 General 8 5.2 Preparation and examination of the test specimen 8 6 Procedure . 9 6.1 Test room climate . 9 6.2 Impact points, directions and test sequence . 9 6.2.1 General 9 6.2.2 Group 1, Group 2 and Group 3 products . 9 6.2.3 Group 4 products 11 6.3 Impact test procedure 11 7 Expression of resu
18、lts . 11 8 Test report 11 Annex A (normative) Test equipment and impact points 13 A.1 Example of a test rig 13 A.2 Load impactor 14 A.3 Examples of mounting arrangements for doorsets . 16 A.4 Examples of mounting arrangements for windows . 18 A.5 Examples of mounting arrangements for wing and foldin
19、g shutters 19 A.6 Examples of mounting arrangements for guide rails and roller shutters into the test rig . 21 A.7 Examples of mounting arrangements for grilles into the test rig . 24 A.8 Impact points for doors 26 A.9 Impact points for windows . 28 A.10 Impact points for shutters 29 A.11 Impact poi
20、nts for grilles. 32 DIN EN 1629:2016-03 EN 1629:2011+A1:2015 (E) 3 Annex B (normative) Test sequence for dynamic loading test in resistance classes 1 to 3 . 34 Bibliography . 35 DIN EN 1629:2016-03 EN 1629:2011+A1:2015 (E) 4 European foreword This document (EN 1629:2011+A1:2015) has been prepared by
21、 Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 20
22、16, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.
23、This document includes Amendment 1 approved by CEN on 2015-11-17. This document supersedes !EN 1629:2011“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This European Standard is one of a series of standards for burglar resistant pedestrian door
24、sets, windows, curtain walling, grilles and shutters. The other standards in the series are: EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and classification; !EN 1628:2011+A1:2015“, Pedestrian doorsets, windows, curtain walling, gr
25、illes and shutters Burglar resistance Test method for the determination of resistance under static loading; !EN 1630:2011+A1:2015“, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts. This
26、 standard is a revision of, and supersedes !EN 1629:2011“. The last two other standards in this series are revisions of, and supersede !EN 1628:2011“ and !EN 1630:2011“ respectively. This revision incorporates grilles and curtain walling in the range of application. The test described in this standa
27、rd is intended to simulate physical attacks, e.g. shoulder charge, kicking. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, D
28、enmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1629
29、:2016-03 EN 1629:2011+A1:2015 (E) 5 1 Scope This European Standard specifies a test method for the determination of resistance to dynamic loading in order to assess the burglar resistant properties of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the follow
30、ing means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed constructions. There are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and t
31、heir ability to remain fixed to the building. Due to the limitation of reproducing the fixing methods and building construction in a laboratory environment this aspect is not fully covered by the standard. This is particularly true with products built into a building. The performance of the fixed pa
32、rt of the product is evaluated using a standard sub frame. It is the manufacturers responsibility to ensure that guidance on the fixing of the product is contained in the mounting instructions and that this guidance is suitable for the burglar resistance class claimed for the product. As with the ot
33、her referenced standards this specification uses a standard sub frame and the product is mounted according to the manufacturers instructions. The fixing method to be considered is detailed in Annex A of EN 1627:2011. This test method does not evaluate the performance of the fixing to the building. T
34、his European Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as cov
35、ered by EN 13241-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356
36、:1999, Glass in building Security glazing Testing and classification of resistance against manual attack EN 1303:2005, Building hardware Cylinders for locks Requirements and test methods EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements
37、 and classification !EN 1628:2011+A1:2015“, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under static loading !EN 1630:2011+A1:2015“, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar
38、resistance Test method for the determination of resistance to manual burglary attempts EN 1906:2010, Building hardware Lever handles and knob furniture Requirements and test methods EN 12209:2003, Building hardware Locks and latches Mechanically operated locks, latches and locking plates - Requireme
39、nts and test methods DIN EN 1629:2016-03 EN 1629:2011+A1:2015 (E) 6 EN 12600:2002, Glass in building Pendulum test Impact test method and classification for flat glass 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1627:2011 and the following apply.
40、3.1 attack side side of the test specimen defined by the applicant as the side exposed to attack 3.2 non-attack side side of the test specimen defined by the applicant as the side not exposed to attack 3.3 test specimen complete, fully functioning construction product as detailed in the scope of thi
41、s standard 3.4 sub-frame surrounding frame into which the test specimen is mounted in accordance with the manufacturers instructions 3.5 test rig surrounding substantial steel frame with movable steel supports into which the sub-frames containing test specimens of various dimensions can be mounted 3
42、.6 impacting unit impactor suspended by means of a suitable steel cable, as a pendulum of fixed length, with a release hook and height regulating device 3.7 impactor body used to strike the test specimen 3.8 impact point position on the surface of the test specimen where the dynamic load is applied
43、4 Apparatus 4.1 Test rig The test rig consisting of a rigid steel frame with movable steel supports into which test specimens of various dimensions can be mounted is shown in Annex A, Figure A.1. The stiffness of the rig shall be such that a 15 kN force applied to any of the defined points and norma
44、l to the plane of the frame will not cause a deflection of more than 5 mm and shall not affect the results of the test. The test rig shall not impede the execution of the test. DIN EN 1629:2016-03 EN 1629:2011+A1:2015 (E) 7 4.2 Pendulum impactor The pendulum impactor, conforming to EN 12600:2002, is
45、 listed with individual components in Table 1 and pictured in Annex A, Figure A.3. The impactor shall consist of two pneumatic tyres (type 3.50-R8 4PR1) ) inflated to a pressure of 0,35 MPa 0,02 MPa with round section and flat longitudinal tread and shall be suspended by means of a suitable steel ca
46、ble giving a minimum pendulum length of 1000 mm 10 mm, with a release hook and height regulating device. The tyres shall be fitted to the rims (type 250-8) of wheels that carry two steel weights of equal mass. The weights shall be dimensioned so that the total mass of the impactor is 50 kg 0,1 kg (e
47、xcluding the steel cable and release hook) and the weights do not have any contact with the test specimen during the impact. The drop height shall be the vertical height through which the centre of gravity of the impactor falls, with a tolerance of 10 mm. The impactor support point shall allow the i
48、mpactor to strike the test specimen at all relevant points. The complete pendulum impactor unit shall be adjustable and may be installed either on the test rig, as shown in Annex A, Figure A.1, or as an independent unit, as shown in Annex A, Figures A.2 and A.3. 4.3 Suspension system The suspension
49、system shall conform to EN 12600:2002. 4.4 Sub-frame The sub-frame shall simulate the support given to the product when installed into a building, and shall be taken into consideration in the manufacturers installation instructions. It shall typically consist of the following: a) for group 1 to group 4 products a rectangular metal tube 120 mm x 120 mm x 5 mm or a rectangular timber frame 100 mm
