1、June 2013 Translation by DIN-Sprachendienst.English price group 25No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 7
2、9.120.10!%*a“2020762www.din.deDDIN EN 1807-1Safety of woodworking machines Band sawing machines Part 1: Table band saws and band re-saws;English version EN 1807-1:2013,English translation of DIN EN 1807-1:2013-06Sicherheit von Holzbearbeitungsmaschinen Bandsgemaschinen Teil 1: Tischbandsgemaschinen
3、und Trennbandsgemaschinen;Englische Fassung EN 1807-1:2013,Englische bersetzung von DIN EN 1807-1:2013-06Scurit des machines pour le travail du bois Machines scier ruban Partie 1: Scies table et scies refendre;Version anglaise EN 1807-1:2013,Traduction anglaise de DIN EN 1807-1:2013-06Together with
4、DIN EN1807-2:2013-06,supersedesDIN EN 1807:2010-02www.beuth.deDocument comprises 74 pagesIn case of doubt, the German-language original shall be considered authoritative.06.13 DIN EN 1807-1:2013-06 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements.
5、 This document (EN 1807-1:2013) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines Safety” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA
6、 060-06-01 AA Holzbearbeitungs-maschinen Sicherheit of Section Holzbearbeitungsmaschinen. Representatives of manufacturers and users of table band saws and band re-saws, and of the employersliability insurance associations contributed to this standard. This standard contains specifications meeting t
7、he essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that direc
8、tive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred
9、to in this document have been published as DIN EN or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available, except for: HD 22.4 S4:2004 DIN EN 50525-2-21 (VDE 0285-525-2-
10、21):2012-01. Amendments This standard differs from DIN EN 1807:2010-02 as follows: a) in Clause 1 “Scope”, PTO-driven machines have been deleted from the scope; b) normative references have been updated; c) in Subclause 5.2 “Controls”, the design requirements for control circuits in certain categori
11、es according to EN 954-1 have been replaced by specifications for performance levels according to EN ISO 13849-1; d) in Subclause 5.3.1 “Stability”, the stability test is required not only for displaceable machines but also for stationary machines; if not passed, fixing is required; e) in Subclause
12、5.3.7.2.4, “Roller tables for band re-saws”, the specification of dimensional requirements for trip device and AOPD required for the prevention of access to moving parts has been rendered more precise; DIN EN 1807-1:2013-06 3 f) in Subclause 5.3.7, “Prevention of access to moving parts”, a requireme
13、nt has been included for guard-locking on interlocked movable guards to prevent access to moving parts, when the band saw blade run-down time exceeds 10 s.; g) in Subclause 5.4.3, “Emission of chips and dust”, further requirements have been included; h) Annex ZA (informative) “Relationship between t
14、his European Standard and the Essential Requirements of EU Directive 98/37/EC” has been deleted; i) the former Annex ZB is now Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC”; j) the Bibliography has been updated. Previou
15、s editions DIN 8804: 1942-05, 1952-04, 1975-01 DIN 8815: 1959-09, 1975-03 DIN EN 1807: 1999-10, 2010-02 DIN EN 1807-1:2013-06 4 National Annex NA (informative) Bibliography DIN EN 50525-2-21 (VDE 0285-525-2-21):2012-01, Electric cables Low voltage energy cables of rated voltages up to and including
16、450/750 V (U0/U) Part 2-21: Cables for general applications Flexible cables with crosslinked elastomeric insulation EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1807-1 March 2013 ICS 79.120.10 Supersedes EN 1807:1999+A1:2009English Version Safety of woodworking machines - Band sawing machine
17、s - Part 1: Table band saws and band re-saws Scurit des machines pour le travail du bois - Machines scier ruban - Partie 1: Scies table et scies refendre Sicherheit von Holzbearbeitungsmaschinen - Bandsgemaschinen - Teil 1: Tischbandsgemaschinen und Trennbandsgemaschinen This European Standard was a
18、pproved by CEN on 13 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati
19、onal standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own langu
20、age and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
21、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Man
22、agement Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1807-1:2013: EEN 1807-1:2013 (E) 2 Contents Page Foreword 4 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms, definiti
23、ons and terminology 10 3.1 Terms and definitions 10 3.2 Terminology 12 4 List of significant hazards . 17 5 Safety requirements and/or measures . 20 5.1 General . 20 5.2 Controls . 21 5.2.1 Safety and reliability of control systems 21 5.2.2 Position of controls 22 5.2.3 Starting 22 5.2.4 Normal stop
24、ping . 23 5.2.5 Emergency stop 23 5.2.6 Tracking mode 24 5.2.7 Mode selection 24 5.2.8 Speed control 24 5.2.9 Control duplication . 25 5.2.10 Failure of the power supply . 25 5.3 Protection against mechanical hazards . 26 5.3.1 Stability 26 5.3.2 Risk of break-up during operation 26 5.3.3 Saw blade
25、holder and saw blade design 28 5.3.4 Braking . 33 5.3.5 Devices to minimise the possibility or the effect of ejection . 34 5.3.6 Workpiece supports and guides . 34 5.3.7 Prevention of access to moving parts 39 5.3.8 Safety appliances for table band saws . 45 5.4 Protection against non-mechanical haz
26、ards . 46 5.4.1 Fire . 46 5.4.2 Noise 46 5.4.3 Emission of chips and dust . 47 5.4.4 Electricity . 48 5.4.5 Ergonomics and handling 49 5.4.6 Pneumatics 50 5.4.7 Hydraulics 50 5.4.8 Vibration 50 5.4.9 Electromagnetic compatibility . 50 5.4.10 Laser 50 5.4.11 Static electricity 51 5.4.12 Errors of fit
27、ting 51 5.4.13 Supply disconnection (Isolation) 51 5.4.14 Maintenance 51 6 Information for use . 52 6.1 General . 52 6.2 Marking 52 DIN EN 1807-1:2013-06 EN 1807-1:2013 (E) 3 6.3 Instruction handbook 53 Annex A (normative) Test for adjustable guard over cutting area of saw blade 58 Annex B (normativ
28、e) Operating conditions for noise emission measurement 60 Annex C (normative) Stability test 61 Annex D (normative) Impact test method for guards 62 D.1 General . 62 D.2 Test method . 62 D.2.1 Preliminary remarks 62 D.2.2 Testing equipment . 62 D.2.3 Projectile for guards 62 D.2.4 Sampling. 62 D.2.5
29、 Test procedure . 62 D.3 Results 63 D.4 Assessment . 63 D.5 Test report 63 D.6 Test equipment for impact test 63 Annex E (normative) Braking tests . 65 E.1 Conditions for all tests 65 E.2 Tests . 65 E.2.1 Unbraked run-down time 65 E.2.2 Run-up time 65 E.2.3 Braked run-down time . 65 Annex ZA (inform
30、ative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 67 Bibliography 70 DIN EN 1807-1:2013-06 EN 1807-1:2013 (E) 4 Foreword This document (EN 1807-1:2013) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the
31、secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attentio
32、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document, together with EN 1807-2:2013, supersedes EN 1807:1999+A1:2009. This document ha
33、s been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive 2006/42/EC. For relationship with EU Directive 2006/42/EC, see informative Annex ZA which is an integral part of this docume
34、nt. The following significant technical changes have been made in this new edition: for controls, the requirement of Performance Level according to EN ISO 13849-1 instead of categories according to EN 954-1; a more complete clause with set of requirements for “Emission of chips and dust“; reference
35、to PTO driven machines; a better definition of dimensional requirements for trip device and AOPD required for “prevention of access to moving parts“; the stability test is required not only for displaceable machines but also for stationary machines: if not passed, fixing is required; requirement for
36、 guard-locking on interlocked movable guards to prevent access to moving parts, when the band saw blade run-down time exceeds 10 s. EN 1807, Safety of woodworking machines Band sawing machines consists of the following parts: Part 1: Table band saws and band re-saws; Part 2: Log sawing machines. Org
37、anisations contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Association “EUMABOIS“. The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the sub
38、ject of general safety (see Introduction of EN ISO 12100:2010 for a description of A, B and C standards). DIN EN 1807-1:2013-06 EN 1807-1:2013 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European
39、 Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni
40、a, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1807-1:2013-06 EN 1807-1:2013 (E) 6 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive and associated EFTA reg
41、ulations. This document is a “type C“ standard as defined in EN ISO 12100:2010. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are
42、 stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The requirements of this document are directed to manufacturers and the
43、ir authorised representatives of table band saws and band re-saws. They are also useful for designers. This document also includes provisions and examples of information to be provided by the manufacturer to the user. DIN EN 1807-1:2013-06 EN 1807-1:2013 (E) 7 1 Scope This European Standard deals wi
44、th all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as “machine
45、s”, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines designed t
46、o cut wood based material may also be used to cut rigid plastic materials with similar characteristics as wood. This European Standard does not apply to: a) Transportable machines, i.e. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary pos
47、ition, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; NOTE 1 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2011
48、. b) hand held motor-operated electric tools including any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 2 Hand-held motor-operated electric tools are covered by the requirements of EN 60745-1:2009 together with EN 60745-2-20:2009. c) log band saws. NOTE 3 Log sawing machines are covered by EN 1807-2. This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment that may be fitted to the machine. This European Standard
