1、March 2013 Translation by DIN-Sprachendienst.English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、79.120.10!$sy“1968086www.din.deDDIN EN 1870-8Safety of woodworking machines Circular sawing machines Part 8: Single blade edging circular rip sawing machines with powerdriven saw unit and manual loading and/or unloading;English version EN 1870-8:2012,English translation of DIN EN 1870-8:2013-03Siche
3、rheit von Holzbearbeitungsmaschinen Kreissgemaschinen Teil 8: Einblattbesum- und Leistenkreissgemaschinen mit kraftbettigtem Sgeaggregatund Handbeschickung und/oder Handentnahme;Englische Fassung EN 1870-8:2012,Englische bersetzung von DIN EN 1870-8:2013-03Scurit des machines pour le travail du bois
4、 Machines scies circulaires Partie 8: Dligneuses mono-lames dplacement mcanis du groupe de sciage et chargement et/ou dchargement manuel;Version anglaise EN 1870-8:2012,Traduction anglaise de DIN EN 1870-8:2013-03SupersedesDIN EN 1870-8:2010-05www.beuth.deIn case of doubt, the German-language origin
5、al shall be considered authoritative.Document comprises 64 pages 02.13 DIN EN 1870-8:2013-03 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 1870-8:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines
6、 Safety” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-06-01 AA Holzbearbeitungsmaschinen Sicherheit of Section Holzbearbeitungsmaschinen. Representatives
7、of manufacturers and users of single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements
8、set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard i
9、s cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in this document have b
10、een published as DIN EN or DIN EN ISO Standards with the same number. For the International Standards and publications referred to in this document there are no national standards available unless they have been published as DIN ISO standards with the same number. HD 21.1 S4:2002 DIN EN 50525-1 (VDE
11、 0285-525-1):2012-01 HD 22.1 S4:2002 DIN EN 50525-1 (VDE 0285-525-1):2012-01 Amendments This standard differs from DIN EN 1870-8:2010-05 as follows: a) Clause 2 “Normative references” has been updated; b) in Subclause 5.2 “Controls” the design requirements for control circuits in certain categories
12、have been replaced by specifications for performance levels; c) Subclause 5.2.1.2 “Use of protective devices” has been added; d) Subclauses 5.2.3 “Starting”, 5.2.4 “Normal stopping” and 5.2.5 “Emergency stop” have been completely revised; e) in Subclause 5.2.8 “Speed control”, further requirements h
13、ave been included for the control system; f) Subclause 5.2.11 “Powered movement of the saw blade and/or fences” has been completely revised; g) Annex G (normative) “Impact test method for guards” has been added including tests on guards materials, unless they are in accordance with Subclause 5.3.2 “
14、Risk of break-up during operation”; DIN EN 1870-8:2013-03 3 h) Subclause 5.3.3.4 “Spindle locking” has been added; i) Subclause 5.3.4 “Braking” has been completely revised and braking tests have been moved to Annex F (normative); j) Subclause 5.3.4.2 “Brake release” has been added; k) Subclause 5.3.
15、7, “Prevention of access to moving parts” has been revised; l) Subclause 5.4.3 “Emission of chips and dust” has been revised to include further requirements; m) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been delet
16、ed and the former Annex ZB is now Annex ZA “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC”. Previous editions DIN EN 1870-8: 2002-03, 2010-05 DIN EN 1870-8:2013-03 4 National Annex NA (informative) Bibliography DIN EN 50525-1 (VDE 0285-525-1):2
17、012-01, Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1: General requirements EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1870-8 November 2012 ICS 79.120.10 Supersedes EN 1870-8:2001+A1:2009English Version Safety of woodworking machine
18、s - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading Scurit des machines pour le travail du bois - Machines scies circulaires - Partie 8: Dligneuses mono-lames dplacement mcanis du groupe de sciage et c
19、hargement et/ou dchargement manuel Sicherheit von Holzbearbeitungsmaschinen - Kreissgemaschinen - Teil 8: Einblattbesum- und Leistenkreissgemaschinen mit kraftbettigtem Sgeaggregat und Handbeschickung und/oder Handentnahme This European Standard was approved by CEN on 1 September 2012. CEN members a
20、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to
21、 the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management C
22、entre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu
23、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussel
24、s 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-8:2012: EEN 1870-8:2012 (E) 2 Contents Page Foreword 4Introduction .61 Scope 72 Normative references 73 Terms and definitions .94 List of significant hazards . 135 Safety
25、requirements and/or measures . 165.1 General . 165.2 Controls . 165.2.1 Safety and reliability of control systems 165.2.2 Position of controls 175.2.3 Starting 175.2.4 Normal stopping . 185.2.5 Emergency stop 195.2.6 Integrated feed 195.2.7 Saw blade changing . 205.2.8 Speed control 205.2.9 Control
26、duplication . 205.2.10 Failure of the power supply . 205.2.11 Powered movement of the saw blade and/or fences 215.3 Protection against mechanical hazards . 225.3.1 Stability 225.3.2 Risk of break-up during operation 225.3.3 Tool holder and tool design . 235.3.4 Braking . 245.3.5 Devices to minimise
27、the possibility or the effect of ejection . 255.3.6 Workpiece supports and guides . 305.3.7 Prevention of access to moving parts 315.3.8 Workpiece clamping . 335.3.9 Safety appliances 355.4 Protection against non-mechanical hazards . 355.4.1 Fire . 355.4.2 Noise 355.4.3 Emission of chips and dust .
28、365.4.4 Electricity . 375.4.5 Ergonomics and handling 375.4.6 Lighting 385.4.7 Pneumatic 385.4.8 Hydraulic 385.4.9 Electromagnetic compatibility . 385.4.10 Laser 385.4.11 Errors of fitting 395.4.12 Isolation . 395.4.13 Maintenance 396 Information for use . 406.1 General . 406.2 Warnings and warning
29、devices . 406.3 Marking 40DIN EN 1870-8:2013-03 EN 1870-8:2012 (E) 3 6.3.1 Marking of riving knives . 406.3.2 Marking of machine . 406.4 Instruction handbook 41Annex A (normative) Saw spindle dimensional tolerances 45Annex B (normative) Riving knife mounting strength test . 46Annex C (normative) Lat
30、eral stability riving knife test . 47Annex D (normative) Sectional safety curtain material rigidity test 48Annex E (normative) Operating conditions for noise emission measurement 49E.1 General . 49E.2 Noise measurements 49E.3 General data sheet 51Annex F (normative) Braking tests . 55F.1 Conditions
31、for all tests 55F.2 Tests . 55F.2.1 Un-braked run-down time . 55F.2.2 Braked run-down time . 55Annex G (normative) Impact test method for guards . 56G.1 General . 56G.2 Test method . 56G.2.1 Preliminary remarks 56G.2.2 Testing equipment . 56G.2.3 Projectile for guards 56G.2.4 Sampling. 56G.2.5 Test
32、procedure . 56G.3 Results 57G.4 Assessment . 57G.5 Test report 57G.6 Test equipment for impact test 57Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 59Bibliography 60DIN EN 1870-8:2013-03 EN 1870-8:2012 (E) 4 Foreword This
33、 document (EN 1870-8:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lates
34、t by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such paten
35、t rights. This document supersedes EN 1870-8:2001+A1:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. For relationship with EU Directive(s), see infor
36、mative Annex ZA, which is an integral part of this document. The main modifications to the previous version concern inclusion of performance levels (PL). Organisations contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Associat
37、ion “EUMABOIS“. EN 1870 Safety of woodworking machines Circular sawing machines consists of the following parts: Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws; Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circ
38、ular saw benches; Part 4: Multiblade rip sawing machines with manual loading and/or unloading; Part 5: Circular sawbenches/up-cutting cross-cut sawing machines; Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual load
39、ing and/or unloading; Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading; Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading (the present document); Part 9: Double blade circular
40、 sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading; Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines; Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws); P
41、art 12: Pendulum cross-cut sawing machines; Part 13: Horizontal beam panel sawing machines; DIN EN 1870-8:2013-03 EN 1870-8:2012 (E) 5 Part 14: Vertical panel sawing machines; Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading; Pa
42、rt 16: Double mitre sawing machines for V-cutting; Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws); Part 18: Dimension saws (at Formal Vote stage at the time of publication of the present document); Part 19: Circular saw benches (with and witho
43、ut sliding table) and building site saws (at Enquiry stage at the time of publication of the present document). The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see Introduction of EN
44、ISO 12100:2010 for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
45、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1870-8:2013-03 EN 187
46、0-8:2012 (E) 6 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This document is a type “C” standard as defined in EN ISO 12100:2010. The machi
47、nery concerned and the extent to which hazards, hazardous situations and events covered are indicated in the scope of this document. The requirements of this document are directed to manufacturers and their authorised representatives of single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading. This document is also useful for designers and importers. When provisions of this type C standard are different from those which are st
