1、January 2013 Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 79.120.10!$Up“1935077www.din.deDDIN EN 1870-9Safety of woodworking machines Circular sawing machines Part 9: Double blade circular sawing machines for cross-cutting withintegrated feed and with manual loading and/or unloading;English version EN 1870-9:2012,English translation of DIN EN 1870-9:2013
3、-01Sicherheit von Holzbearbeitungsmaschinen Kreissgemaschinen Teil 9: Doppelgehrungskreissgemaschinen mit mechanischem Vorschub undHandbeschickung und/oder Handentnahme;Englische Fassung EN 1870-9:2012,Englische bersetzung von DIN EN 1870-9:2013-01Scurit des machines pour le travail du bois Machines
4、 scies circulaires Partie 9: Machines scier deux lames de scie circulaires pour tronconnage, avancemcanise et chargement et/ou dchargement manuels;Version anglaise EN 1870-9:2012,Traduction anglaise de DIN EN 1870-9:2013-01SupersedesDIN EN 1870-9:2010-03www.beuth.deIn case of doubt, the German-langu
5、age original shall be considered authoritative.Document comprises 45 pages 1 .122 DIN EN 1870-9:2013-01 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 142 “Woodworking machines Safet
6、y” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-06-01 AA Holzbearbeitungs-maschinen Sicherheit of Section Holzbearbeitungsmaschinen. Representatives of ma
7、nufacturers and users of double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements
8、 set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. The European Standa
9、rds referred to in Clause 2 and in the Bibliography of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 1870-9:2010-03 as follows: a) normative references have been updated; b) in Subclause 5.2 “Controls
10、” the design requirements for control circuits in certain categories have been replaced by specifications for performance levels. c) Subclause 5.2.1.2 “Use of protective devices” has been added; d) further requirements have been specified in Subclauses 5.2.3 “Starting”, 5.2.4 “Normal stopping”, 5.2.
11、5 “Emergency stop” and 5.2.6 “Failure of the power supply”; e) Annex C (normative) “Impact test method for guards” has been added including tests on guards materials, unless they are in accordance with Subclause 5.3.2 “Risk of break-up during operation”; f) Subclause 5.3.4 “Braking” has been complet
12、ely revised and braking tests have been moved to Annex B (normative); g) Subclause 5.3.7, “Prevention of access to moving parts” has been completely revised; h) Subclause 5.4.3 “Emission of chips and dust” has been revised to include further requirements; i) Subclause 5.4.11, “Isolation” has been re
13、vised to include further requirements; j) Subclause 5.4.12 “Maintenance” has been revised to include further requirements; k) Subclause 6.2, “Warnings and warning devices” has been added; l) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Dire
14、ctive 98/37/EC” has been deleted; m) the former Annex ZB is now Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC”; n) the Bibliography has been updated. Previous editions DIN EN 1870-9: 2000-09, 2010-03 EUROPEAN STANDARD NO
15、RME EUROPENNE EUROPISCHE NORM EN 1870-9 September 2012 ICS 79.120.10 Supersedes EN 1870-9:2000+A1:2009English Version Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unload
16、ing Scurit des machines pour le travail du bois - Machines scies circulaires - Partie 9: Machines scier deux lames de scie circulaires pour trononnage, avance mcanise et chargement et/ou dchargement manuels Sicherheit von Holzbearbeitungsmaschinen - Kreissgemaschinen - Teil 9: Doppelgehrungskreissge
17、maschinen mit mechanischem Vorschub und Handbeschickung und/oder HandentnahmeThis European Standard was approved by CEN on 13 July 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
18、 standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version
19、 in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czec
20、h Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EU
21、ROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-9:2012: EEN 1870-9:20
22、12 (E) 2 Contents Page Foreword 4Introduction .61 Scope 72 Normative references 73 Terms and definitions .93.1 General 93.2 Definitions 94 List of significant hazards . 115 Safety requirements and/or measures . 135.1 General . 135.2 Controls . 135.2.1 Safety and reliability of control systems 135.2.
23、2 Position of controls 145.2.3 Starting 155.2.4 Normal stopping . 155.2.5 Emergency stop 165.2.6 Failure of the power supply . 165.3 Protection against mechanical hazards . 175.3.1 Stability 175.3.2 Risk of break-up during operation 175.3.3 Tool holder and tool design . 175.3.4 Braking . 195.3.5 Dev
24、ices to minimise the possibility or the effect of ejection . 205.3.6 Workpiece supports and guides . 205.3.7 Prevention of access to moving parts 215.3.8 Clamping devices . 275.4 Protection against non-mechanical hazards . 285.4.1 Fire . 285.4.2 Noise 285.4.3 Emission of chips and dust . 295.4.4 Ele
25、ctricity . 305.4.5 Ergonomics and Handling . 305.4.6 Lighting 315.4.7 Pneumatic 315.4.8 Hydraulic 315.4.9 Laser 315.4.10 Errors of fitting 315.4.11 Isolation . 315.4.12 Maintenance 326 Information for use . 326.1 General . 326.2 Warnings and warning devices . 326.3 Marking of the machine 336.4 Instr
26、uction handbook . 33Annex A (normative) Dimensional tolerances of saw spindles 37Annex B (normative) Braking tests 38B.1 Conditions for all tests . 38DIN EN 1870-9:2013-01 EN 1870-9:2012 (E) 3 B.2 Tests . 38B.2.1 Un-braked run-down time . 38B.2.2 Braked run-down time . 38Annex C (normative) Impact t
27、est method for guards 39C.1 General . 39C.2 Test method . 39C.2.1 Preliminary remarks 39C.2.2 Testing equipment . 39C.2.3 Projectile for guards 39C.2.4 Sampling. 39C.2.5 Test procedure . 39C.3 Results 40C.4 Assessment . 40C.5 Test report 40C.6 Test equipment for impact test 40Annex ZA (informative)
28、Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 42Bibliography 43DIN EN 1870-9:2013-01 EN 1870-9:2012 (E) 4 Foreword This document (EN 1870-9:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking mchines - Safety”, the secretaria
29、t of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at the latest by March 2013. Attention is drawn to the
30、possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1870-9:2000+A1:2009. The main modifications to the previous version concern inclusio
31、n of performance levels (PL). This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. For relationship with EU Directive 2006/42/EC, see informative Annex ZA, whic
32、h is an integral part of this document. Organisations contributing to the preparation of this document include European Committee of Woodworking Machinery Manufacturers Association “EUMABOIS“. EN 1870, Safety of woodworking machines Circular sawing machines, consists of the following parts: Part 1:
33、Circular saw benches (with and without sliding table), dimension saws and building site saws Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Part 4: Multi-blade rip sawing machines with manual loading and/or unloading Part 5: Circular saw benches
34、/up-cutting cross-cut sawing machines Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloadin
35、g Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading (the present document) Part 10: Single blade automat
36、ic and semi-automatic up-cutting cross-cut sawing machines Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) Part 12: Pendulum cross-cut sawing machines DIN EN 1870-9:2013-01 EN 1870-9:2012 (E) 5 Part 13: Horizontal beam panel sawing machi
37、nes Part 14: Vertical panel sawing machines Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading Part 16: Double mitre sawing machines for V-cutting Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (man
38、ual radial arm saws) Part 18: Dimension saws Part 19: Circular saw benches (with and without sliding table) and building site saws The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see
39、introduction of EN ISO 12100:2010 for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,
40、 Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 18
41、70-9:2013-01 EN 1870-9:2012 (E) 6 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This document is a type C standard as defined in EN ISO 1210
42、0:2010. The machinery concerned and the extent to which hazards, hazardous situations and events are covered is indicated in the scope of this document. The requirements of this document are directed to manufacturers and their authorised representatives of double blade circular sawing machines for c
43、ross-cutting with integrated feed and with manual loading and/or unloading. This document is also useful for designers and importers. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence ove
44、r the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. This document also includes information to be provided by the manufacturer to the user. Common requirements for tooling are given in EN 847-1:2005+A1:2007. DIN EN
45、1870-9:2013-01 EN 1870-9:2012 (E) 7 1 Scope This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double blade circular sawing machines for cross-cutting with integrated feed of the saw units and with manual loading and
46、/or unloading, hereinafter referred to as machines. These are machines designed to cut solid wood, chipboard, fibreboard and plywood, and also these materials when covered with plastic edging and/or plastic/light alloy laminate, when they are used as intended and under the conditions foreseen by the
47、 manufacturer including reasonably foreseeable misuse. This document does not apply to: machines for cross cutting logs; double blade up-cutting cross-cut sawing machines. This document is not applicable to machines which are manufactured before its date of publication as an EN. 2 Normative referenc
48、es The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 574:1996+A1:2008, Safety of machinery Two hand
