DIN EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature German version EN 15922 2011《肥料 按照皮特曼室温的可溶磷的萃取 德文版本EN 15922-2011》.pdf

上传人:Iclinic170 文档编号:672528 上传时间:2018-12-27 格式:PDF 页数:9 大小:526.36KB
下载 相关 举报
DIN EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature German version EN 15922 2011《肥料 按照皮特曼室温的可溶磷的萃取 德文版本EN 15922-2011》.pdf_第1页
第1页 / 共9页
DIN EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature German version EN 15922 2011《肥料 按照皮特曼室温的可溶磷的萃取 德文版本EN 15922-2011》.pdf_第2页
第2页 / 共9页
DIN EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature German version EN 15922 2011《肥料 按照皮特曼室温的可溶磷的萃取 德文版本EN 15922-2011》.pdf_第3页
第3页 / 共9页
DIN EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature German version EN 15922 2011《肥料 按照皮特曼室温的可溶磷的萃取 德文版本EN 15922-2011》.pdf_第4页
第4页 / 共9页
DIN EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature German version EN 15922 2011《肥料 按照皮特曼室温的可溶磷的萃取 德文版本EN 15922-2011》.pdf_第5页
第5页 / 共9页
点击查看更多>>
资源描述

1、August 2011 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、65.080!$t2p“1811577www.din.deDDIN EN 15922Fertilizers Extraction of soluble phosphorus according to Petermann at ambienttemperatureEnglish translation of DIN EN 15922:2011-08Dngemittel Extraktion des lslichen Phosphors nach Petermann bei RaumtemperaturEnglische bersetzung von DIN EN 15922:2011-08Eng

3、rais Extraction du phosphore soluble selon Petermann la temprature ambianteTraduction anglaise de DIN EN 15922:2011-08SupersedesDIN SPEC 1105(DIN CEN/TS 15922):2010-02www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.908.11 DIN EN 15

4、922:2011-08 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials” (Secretariat: DIN, Germany) under the mandate M/335. The responsible German body involved in its preparation was the Normenausschu

5、ss Lebensmittel und landwirtschaftliche Produkte (Food and Agricultural Products Standards Committee), Working Committee NA 057-03-02 AA Dngemittel. The method specified in this standard is based upon Regulation (EC) No 2003/2003 relating to fertilizers, Annex IV, method 3.1.5.2 (see Bibliography).

6、DIN EN 15922 supersedes DIN SPEC 1105 (DIN CEN/TS 15922):2010-02, which has been adopted as a European Standard based on the results of the unique acceptance procedure. Amendments This standard differs from DIN SPEC 1105 (DIN CEN/TS 15922):2010-02 as follows: a) in Subclause 8.2, a normative referen

7、ce to CEN/TS 15959 has been included relating to the determination of phosphorus; b) normative references have been updated; c) the Bibliography has been updated; d) the standard has been editorially revised. Previous editions DIN SPEC 1105 (DIN CEN/TS 15922): 2010-02 2 EUROPEAN STANDARD NORME EUROP

8、ENNE EUROPISCHE NORM EN 15922 June 2011 ICS 65.080 Supersedes CEN/TS 15922:2009English Version Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature Engrais - Extraction du phosphore soluble selon Petermann temprature ambiante Dngemittel - Extraktion des lslich

9、en Phosphors nach Petermann bei Raumtemperatur This European Standard was approved by CEN on 29 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterat

10、ion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made b

11、y translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

12、 Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISC

13、HES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15922:2011: EEN 15922:2011 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms a

14、nd definitions .4 4 Principle 4 5 Sampling .4 6 Reagents .5 7 Apparatus .6 8 Procedure .6 Bibliography 7 DIN EN 15922:2011-08 EN 15922:2011 (E) 3 Foreword This document (EN 15922:2011) has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials”, the secretariat of which is

15、 held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibi

16、lity that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 15922:2009. This document has been prepared under a mandate given to CEN by the Europea

17、n Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla

18、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 15922:2011-08 EN 15922:2011 (E) 4 1 Scope This document specifies the pro

19、cedure for the extraction of phosphorus soluble in cold alkaline ammonium citrate. The method is applicable for disintegrated phosphates exclusively. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editi

20、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1482-2, Fertilizers and liming materials Sampling and sample preparation Part 2: Sample preparation EN 12944-1:1999, Fertilizers and liming materials and soil improvers Voca

21、bulary Part 1: General terms EN 12944-2:1999, Fertilizers and liming materials and soil improvers Vocabulary Part 2: Terms relating to fertilizers EN 15475, Fertilizers Determination of ammoniacal nitrogen CEN/TS 15959, Fertilizers Determination of extracted phosphorus 3 Terms and definitions For th

22、e purposes of this document, the terms and definitions given in EN 12944-1:1999 and EN 12944-2:1999 apply. 4 Principle Extraction of phosphorus at ambient temperature about 20 C with an alkaline solution of ammonium citrate (Petermanns solution) under the specified conditions. 5 Sampling Sampling is

23、 not part of the method specified in this document. A recommended sampling method is given in EN 1482-1. Sample preparation shall be carried out in accordance with EN 1482-2. Grinding of the laboratory sample is recommended for homogeneity reasons. DIN EN 15922:2011-08 EN 15922:2011 (E) 5 6 Reagents

24、 6.1 Water, distilled or demineralized having the same characteristics as distilled water. 6.2 Petermanns solution 6.2.1 Characteristics of the Petermanns solution citric acid (C6H8O7. H2O): 173 g/l; ammonia: 42 g/l of ammoniacal nitrogen; pH between 9,4 and 9,7. 6.2.2 Preparation from diammonium ci

25、trate Dissolve 931 g of diammonium citrate (molecular mass 226,19) in about 3 500 ml of water (6.1), in a 5 l standard flask. Stand in a bath of running water, mix and cool and add in small amounts ammonia. For example, for d20= 0, 906 g/ml.corresponding to a level of 20,81 % by mass of ammoniacal n

26、itrogen, it is necessary to use 502 ml of ammonia solution. Adjust the temperature to 20 C, make up to volume with water (6.1) and mix. 6.2.3 Preparation from citric acid and ammonia Dissolve 865 g of citric acid monohydrate in about 2 500 ml of water (6.1) in a container of about 5 l capacity. Plac

27、e the container in an ice bath, and add in small amounts, shaking constantly, ammonia solution using a funnel, the stem of which is immersed in the citric acid solution. For example, for d20= 0, 906 g/ml.corresponding to a level of 20,81 % by mass of ammoniacal nitrogen, it is necessary to add 1 114

28、 ml of ammonia solution. Adjust the temperature to 20 C, transfer to a 5 l standard flask, make up to the mark with water (6.1) and mix. 6.2.4 Checking of the ammoniacal nitrogen content Transfer 25 ml of the solution into a 250 ml standard flask and make up to volume with water (6.1) and mix. Deter

29、mine the ammoniacal content on 25 ml of this solution according to EN 15475. If the solution is correct, an amount of 15 ml of c = 0,25 mol/l H2SO4 shall be used. If the strength of ammoniacal nitrogen is greater than 42 g/l, NH3can be expelled by a stream of inert gas or by moderate heating to brin

30、g back the pH to 9,7. Carry out a second determination. If the strength of ammoniacal nitrogen is less than 42 g/l, it will be necessary to add a mass M in grams of ammonia solution: 20,815002,8)(42 = nM (1) n is the volume of the sulfuric acid c=0,25 mol/l, in millilitres or a volume, V, at 20 C: 0

31、,906MV = (2) If V is less than 25 ml, add it directly to the 5 l flask with a mass of V 0,173 g powdered citric acid. DIN EN 15922:2011-08 EN 15922:2011 (E) 6 If V is greater than 25 ml, it will be convenient to prepare a new litre of reagent in the following way. Weigh 173 g of citric acid. Dissolv

32、e it in 500 ml of water. And, taking the precautions indicated, add not more than 225 + V 1 206 ml of ammonia solution which was used to prepare the 5 l of reagent. Make up to volume with water and mix. Mix this litre with the 4 975 ml previously prepared. 7 Apparatus 7.1 Common laboratory equipment

33、 and glassware, in particular equipment according to 7.2 to 7.3. 7.2 250 ml graduated flask, e.g. Stohmann. 7.3 Rotary shaker, 35 to 40 turns per minute. 8 Procedure 8.1 Test portion Weigh, to the nearest 0,001 g, 2,5 g of the prepared sample and place it in a 250 ml graduated flask (7.2). 8.2 Extra

34、ction Add a little amount of Petermanns solution (6.2) at 20 C, shake very hard in order to stop the formation of lumps and to prevent any of the substance adhering to the side of the flask. Make up to the graduation mark with Petermanns solution and close the flask with a rubber stopper. Shake for

35、2 h in the rotary shaker (7.3). Filter immediately through a dry pleated filter, free from phosphate, into a dry container, discarding the first portion of the filtrate. Continue the filtering until a sufficient quantity of filtrate is obtained to carry out the phosphorus determination according to

36、CEN/TS 15959. DIN EN 15922:2011-08 EN 15922:2011 (E) 7 Bibliography 1 EN 1482-1, Fertilizers and liming materials Sampling and sample preparation Part 1: Sampling 2 Regulation (EC) No 2003/2003 of the European Parliament and of the Council of 13 October 2003 relating to fertilisers, Official Journal L 304, 21/11/2003, P. 0001-0194, Annex IV, method 3.1.5.2 DIN EN 15922:2011-08

展开阅读全文
相关资源
  • DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdfDIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf
  • DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdfDIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf
  • DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdfDIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf
  • DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdfDIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf
  • DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdfDIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf
  • DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdfDIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf
  • DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdfDIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf
  • DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdfDIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf
  • DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdfDIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf
  • DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdfDIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf
  • 猜你喜欢
  • ASTM D7332 D7332M-2009 0625 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方法》.pdf ASTM D7332 D7332M-2009 0625 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方法》.pdf
  • ASTM D7332 D7332M-2015 red 3582 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方.pdf ASTM D7332 D7332M-2015 red 3582 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方.pdf
  • ASTM D7332 D7332M-2015a 0826 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方法》.pdf ASTM D7332 D7332M-2015a 0826 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方法》.pdf
  • ASTM D7332 D7332M-2016 7156 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方法》.pdf ASTM D7332 D7332M-2016 7156 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite《测量纤维增强聚合物基复合材料紧固件全程拉动阻力的标准试验方法》.pdf
  • ASTM D7334-2008 866 Standard Practice for Surface Wettability of Coatings Substrates and Pigments by Advancing Contact Angle Measurement《用前进接触角法测量涂料、颜料和基质的表面润湿性的标准实施规程》.pdf ASTM D7334-2008 866 Standard Practice for Surface Wettability of Coatings Substrates and Pigments by Advancing Contact Angle Measurement《用前进接触角法测量涂料、颜料和基质的表面润湿性的标准实施规程》.pdf
  • ASTM D7334-2008(2013) 1875 Standard Practice for Surface Wettability of Coatings Substrates and Pigments by Advancing Contact Angle Measurement《通过推进接触角测量涂层 基板和颜料表面润湿性的标准实施规程》.pdf ASTM D7334-2008(2013) 1875 Standard Practice for Surface Wettability of Coatings Substrates and Pigments by Advancing Contact Angle Measurement《通过推进接触角测量涂层 基板和颜料表面润湿性的标准实施规程》.pdf
  • ASTM D7336 D7336M-2007 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials《蜂窝夹芯结构堆芯材料的静能吸收性能的标准试验方法》.pdf ASTM D7336 D7336M-2007 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials《蜂窝夹芯结构堆芯材料的静能吸收性能的标准试验方法》.pdf
  • ASTM D7336 D7336M-2012 red 6607 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials《蜂窝夹芯结构堆芯材料的静能吸收性能的标准试验方法》.pdf ASTM D7336 D7336M-2012 red 6607 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials《蜂窝夹芯结构堆芯材料的静能吸收性能的标准试验方法》.pdf
  • ASTM D7336 D7336M-2016 5239 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials《蜂窝夹层芯材静态能量吸收特性的标准试验方法》.pdf ASTM D7336 D7336M-2016 5239 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials《蜂窝夹层芯材静态能量吸收特性的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > DIN

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1