1、July 2017 English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.060.40!%h1|“2691489www.din.deDIN
2、 EN 16497-2Chimneys Concrete System Chimneys Part 2: Balanced flue applications;English version EN 164972:2017,English translation of DIN EN 16497-2:2017-07Abgasanlagen SystemAbgasanlagen aus Beton Teil 2: LuftAbgasSysteme;Englische Fassung EN 164972:2017,Englische bersetzung von DIN EN 16497-2:2017
3、-07Conduits de fume ConduitsSystmes de fume en bton Partie 2: Applications quilibres;Version anglaise EN 164972:2017,Traduction anglaise de DIN EN 16497-2:2017-07See start of applicationwww.beuth.deDocument comprises pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language origi
4、nal shall be considered authoritative.5206.17DIN EN 16497-2:2017-07 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2017-07-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this s
5、tandard has been listed in the Official Journal of the European Union and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. National foreword This document (EN 16497-2:2017) has
6、been prepared by Technical Committee CEN/TC 166 “Chimneys” (Secretariat: ASI, Austria). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-11-36 AA “Clay/ceramic and concrete chim
7、neys (national Mirror Committee to CEN/TC 166/WG 3 and WG 5)”. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 2859-1:1999 + Cor. 1:2001 + Amd. 1:2011 DIN ISO 2859-1:2014-08 At the time of publication, it was not possible to make any addit
8、ional corrections to the English reference document; therefore national footnotes have been added to the translated German version of the standard. The responsible Technical Committee CEN/TC 166 is aware of the need for correction and it is intended that the corrections will be made during the next
9、revision of the standard or in the process of drafting an Amendment. National footnotes are found in the following parts of the standard: a) N1) is in 3.13; b) N2) is in Annex A, A.10.4; c) N3) is in Table ZA 3.1; d) N4) is in Table ZA 3.2; e) N5) is in Table ZA 3.2. DIN EN 16497-2:2017-07 3 Nationa
10、l Annex NA (informative) Bibliography DIN ISO 2859-1:2014-08, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011) DIN EN 16497-2:2017-07 4 This page is intentionally
11、 blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16497-2 March 2017 ICS 91.060.40 English Version Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications Conduits de fume - Conduits-Systmes de fume en bton - Partie 2: Applications quilibres Abgasanlagen - System-Abgasanla
12、gen aus Beton - Teil 2: Luft-Abgas-Anlagen This European Standard was approved by CEN on 28 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati
13、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
14、 translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
15、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR S
16、TANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16497-2:2017 EEN 16497-2:2017 (E) 2
17、Contents Page European foreword . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 7 4 Form . 9 5 Materials 10 5.1 General . 10 5.2 Reaction to fire 10 5.3 Reinforcement for handling . 11 6 Surface treatment 11 7 Tolerances on dimensions of individual concrete components 11 7.1 Declare
18、d dimensions 11 7.2 Straightness 12 7.3 Squareness of ends 12 8 Performance 12 8.1 Heat stress resistance . 12 8.2 Heat shock resistance . 12 8.3 Thermal resistance 13 8.4 Gas tightness 13 8.5 Abrasion resistance . 13 8.6 Compressive strength . 14 8.7 Corrosion resistance . 14 8.8 Condensate resista
19、nce 14 8.9 Water vapour diffusion resistance 15 8.10 Bulk density . 15 8.11 Flexural strength under wind loading 15 8.12 Flow resistance . 16 8.12.1 Flow resistance of straight flue duct (rF) . 16 8.12.2 Flow resistance of straight air supply duct (rA) 16 8.12.3 Flow resistance of fittings . 16 8.13
20、 Freezethaw resistance . 16 8.14 Resistance to fire external to external . 16 8.15 Dangerous substances 16 8.16 Relative movement between inner liner and outer wall . 17 8.17 Terminals 17 8.17.1 Type III . 17 8.17.2 Flow resistance of terminals 17 8.17.3 Wind velocity pressure of type III terminals
21、17 8.17.4 Recirculation factor of type III termination . 17 8.17.5 Pressure equalising opening 17 8.17.6 Rainwater ingress 17 8.17.7 Icing behaviour . 18 9 Designation. 18 DIN EN 16497-2:2017-07 EN 16497-2:2017 (E) 3 9.1 General . 18 9.2 Temperature class 18 9.3 Pressure class 19 9.4 Resistance to c
22、ondensate class 19 9.5 Corrosion resistance class . 20 9.6 Resistance to fire class 20 10 Marking 20 11 Product information 21 12 Assessment and verification of constancy of performance (AVCP) 21 12.1 General . 21 12.2 Initial type testing 21 12.3 Further type tests . 21 12.4 Factory production cont
23、rol . 22 Annex A (normative) Test methods 23 A.1 Squareness of ends test 23 A.1.1 Apparatus 23 A.1.2 First procedure 25 A.1.3 Test result first procedure . 25 A.1.4 Second procedure . 25 A.1.5 Test result second procedure . 25 A.2 Straightness test 25 A.2.1 Apparatus 25 A.2.2 Procedure 25 A.2.3 Test
24、 result 26 A.3 Thermal performance tests 26 A.4 Thermal resistance 26 A.4.1 Test Method 26 A.4.2 Test results 27 A.5 Gas tightness test 27 A.5.1 Test Method 27 A.5.2 Test result 27 A.6 Abrasion resistance test . 27 A.6.1 Test Method 27 A.6.2 Test result 27 A.7 Compressive strength test . 27 A.7.1 Ap
25、paratus 27 A.7.2 Preparation of test sample 27 A.7.3 Test procedure 28 A.7.4 Test result 28 DIN EN 16497-2:2017-07 EN 16497-2:2017 (E) 4 A.8 Corrosion and condensate resistance test 28 A.8.1 Test apparatus. 28 A.8.2 Acid solution and test solution 31 A.8.3 Test sample 31 A.8.4 Conditioning . 31 A.8.
26、5 Test procedure 31 A.8.6 Test results . 32 A.9 Water vapour diffusion resistance 32 A.9.1 Test method . 32 A.9.2 Test results . 32 A.10 Flexural strength under wind load 32 A.10.1 Principle 32 A.10.2 Preparation of test specimen . 33 A.10.3 Test procedure 33 A.10.4 Test result . 33 A.11 Bulk densit
27、y . 33 A.11.1 Apparatus 33 A.11.2 Procedure 33 A.11.3 Test result . 33 A.12 Ultimate compressive strength . 34 A.12.1 Test procedure 34 A.12.2 Test result . 34 Annex B (informative) Examples of concrete flue block shapes 35 B.1 General . 35 B.2 Multi-flued flue blocks 36 Annex C (normative) Thermal
28、resistance calculation method . 37 C.1 Thermal resistance of the individual element 37 C.2 Thermal resistance of the chimney and of enclosures . 37 Annex D (normative) Requirements of sampling plan according to ISO 2859-1:1999 at an Acceptable Quality Level (AQL) of 10 % and inspection level S2 . 38
29、 D.1 Acceptability determination 38 D.1.1 Single sampling . 38 D.1.2 Double sampling . 38 D.2 Normal inspection 38 D.3 Reduced Inspection . 40 D.4 Reduced to normal inspection. 41 DIN EN 16497-2:2017-07 EN 16497-2:2017 (E) 5 D.5 Tightened inspection . 41 D.6 Tightened to normal inspection 41 D.7 Dis
30、continuation of inspection 41 Annex E (informative) Recommended test sequence for performance characteristics 42 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.305/2011 43 ZA.1 Scope and relevant characteristics 43 ZA.2 System of Assessment and Verification of
31、Constancy of Performance (AVCP) 45 ZA.3 Assignment of AVCP tasks . 45 Bibliography . 48 DIN EN 16497-2:2017-07 EN 16497-2:2017 (E) 6 European foreword This document (EN 16497-2:2017) has been prepared by Technical Committee CEN/TC 166 “Chimneys”, the secretariat of which is held by ASI. This Europea
32、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by December 2018. Attention is drawn to the possibility that some of the ele
33、ments of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential require
34、ments of EU Directive(s). For relationship with EU Regulation, see informative Annex ZA, which is an integral part of this document. In this European Standard, the Annexes A, C and D are normative (not forming part of the product specification) and Annexes E and ZA are informative. This standard is
35、one of a series of coordinated standards dealing with specification, design, and testing of chimneys, both single and multi wall. The coordinated package of standards is further divided by material of construction and this European Standard is one of a series of specifications and execution document
36、s dealing with design and installation of concrete chimney products and systems. The standards in this series for concrete chimney products and systems are: EN 1857, Chimneys Components Concrete flue liners; EN 1858, Chimneys Components Concrete flue blocks; EN 12446, Chimneys Components Concrete ou
37、ter wall elements. EN 16497-1, Chimneys Concrete system chimneys Part 1: Non-balanced flue applications EN 16497-2, Chimneys Concrete system chimneys Part 2: Balanced flue applications According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries
38、are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
39、Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16497-2:2017-07 EN 16497-2:2017 (E) 7 1 Scope This European Standard specifies the materials, dimensional and performance requirements for straight concrete system chimneys for balanced f
40、lue applications comprising a concrete flue liner and a combustion air supply duct, and a combination of compatible chimney components, which may be concrete flue blocks (see Clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney. The Europea
41、n Standard does not apply to concrete system chimneys with back ventilation. This European Standard does not cover products designated wet (W) in conjunction with corrosion class 3. This European Standard also applies to concrete system chimneys constructed from storey-height elements and flue block
42、s reinforced for handling. This European Standard does not apply to structurally independent (free standing or self-supporting) system chimneys. NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated. 2 Normative references The follow
43、ing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 206:2013+A1:20
44、16, Concrete Specification, performance, production and conformity EN 1443, Chimneys General requirements EN 13216-1, Chimneys Test methods for system chimneys Part 1: General test methods EN 13384-1, Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one heating applian
45、ce EN 14297:2004, Chimneys Freeze-thaw resistance test method for chimney products CEN/TS 16134:2011, Chimney terminals General requirements and material independent test methods EN ISO 7500-1:2015, Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/c
46、ompression testing machines Calibration and verification of the force-measuring system (ISO 7500-1:2015) ISO 2859-1:1999, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and definitions For the purp
47、oses of this document, the terms and definitions given in EN 1443 and the following apply. 3.1 flue block fitting element fitted to the flue block such as an access opening or offset DIN EN 16497-2:2017-07 EN 16497-2:2017 (E) 8 3.2 hollow wall flue block flue block having vertical cavities Note 1 to
48、 entry: Cavities may pass through both ends of the block. 3.3 manufacturers declared internal transverse dimension internal dimension of the flue block measured perpendicular to the longitudinal axis 3.4 manufacturers declared height internal height of the flue block Note 1 to entry: Examples of mea
49、surement are shown in Figure 1. a) with rebate b) with plain end Key H internal height Figure 1 Manufacturers declared height 3.5 manufacturers declared structural height maximum constructional height of the flue blocks as declared by the manufacturer 3.6 manufacturers declared overall wall thickness dimensions at its thinnest point, between the inside face of the flue and the outside face of the flue block, not measured at any joint feature Note 1 to entry: Examples for joint features are spigot
