1、February 2016 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.30!%LS8“2414821www.din.d
2、eDIN EN 16622Silica-calcium fume for concrete Definitions, requirements and conformity criteria;English version EN 16622:2015,English translation of DIN EN 16622:2016-02Siliko-Calciumstaub fr Beton Definitionen, Anforderungen und Konformittskriterien;Englische Fassung EN 16622:2015,Englische bersetz
3、ung von DIN EN 16622:2016-02Fumes de silico-calcium pour bton Dfinitions, exigences et critres de conformit;Version anglaise EN 16622:2015,Traduction anglaise de DIN EN 16622:2016-02See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original
4、shall be considered authoritative.Document comprises33pages03.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-02-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this stan
5、dard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. Nation
6、al foreword This document (EN 16622:2015) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering)
7、, Working Committee NA 005-07-24 AA Betonzusatz-stoffe, SpA zu CEN/TC 104/WG 4, SpA zu CEN/TC 104/WG 9, SpA zu CEN/TC 104/WG 15. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 9277 DIN ISO 9277 ISO 9286 DIN ISO 9286 National Annex NA (
8、informative) Bibliography DIN ISO 9277, Determination of the specific surface area of solids by gas adsorption using the BET method DIN ISO 9286, Abrasive grains and crude Chemical analysis of silicon carbide DIN EN 16622:2016-02EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16622 November 201
9、5 ICS 91.100.30 English Version Silica-calcium fume for concrete - Definitions, requirements and conformity criteria Fumes de silico-calcium pour bton - Dfinitions, exigences et critres de conformit Siliko-Calciumstaub fr Beton - Definitionen, Anforderungen und Konformittskriterien This European Sta
10、ndard was approved by CEN on 26 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern
11、ing such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
12、its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger
13、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F
14、R NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16622:2015 EEN 16622:2015 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normativ
15、e references 6 3 Terms and definitions . 7 4 Health, hygiene and environment . 9 4.1 Release of dangerous substances 9 4.2 Emission of radioactivity 9 5 Product characteristics 10 5.1 General . 10 5.2 Chemical requirements 10 5.2.1 Silicon dioxide . 10 5.2.2 Elemental silicon 10 5.2.3 Total calcium
16、oxide . 10 5.2.4 Free calcium oxide . 10 5.2.5 Sulfate . 10 5.2.6 Total content of alkalis . 10 5.2.7 Chloride . 10 5.2.8 Loss on ignition . 11 5.3 Physical requirements . 11 5.3.1 Specific surface . 11 5.3.2 Activity index . 11 5.3.3 Particle density . 11 6 Assessment and verification of constancy
17、of performance AVCP 11 6.1 General . 11 6.2 Type testing 12 6.2.1 General . 12 6.2.2 Test samples, testing and compliance criteria 13 6.2.3 Test reports 13 6.3 Factory production control (FPC) 13 6.3.1 General . 13 6.3.2 Requirements 14 6.3.3 Product specific requirements 17 6.3.4 Initial inspection
18、 of factory and of FPC 17 6.3.5 Continuous surveillance of FPC . 18 6.3.6 Procedure for modifications 18 7 Packaging, labelling and marking 18 8 Compliance criteria . 19 8.1 General . 19 8.2 Statistical compliance criteria . 19 8.2.1 General . 19 8.2.2 Inspection by variables 19 8.2.3 Inspection by
19、attributes . 20 DIN EN 16622:2016-02EN 16622:2015 (E) 3 8.3 Single result conformity criteria . 21 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 22 ZA.1 Scope and relevant characteristics 22 ZA.2 Procedure for AVCP of
20、SCF 23 ZA.2.1 System of AVCP 23 ZA.2.2 Declaration of performance (DoP) . 24 ZA.2.2.1 General . 24 ZA.2.2.2 Content . 25 ZA.2.2.3 Example of DoP . 26 ZA.3 CE marking and labelling . 28 Bibliography . 31 DIN EN 16622:2016-02EN 16622:2015 (E) 4 European foreword This document (EN 16622:2015) has been
21、prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting natio
22、nal standards shall be withdrawn at the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been
23、prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standard
24、s organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem
25、bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16622:2016-02EN 16622:2015 (E) 5 Introduction Silica-calcium fume (SCF) according to this European Standard is a special type of silica fume containing
26、some calcium. It is collected by filters as a by-product of the carbothermal process to produce silica-calcium alloys. It is only supplied as a densified product. SCF from more than one furnace, filter or intermediate storage silo will normally be blended in the production plant. Many years of pract
27、ical experience, especially in France, have demonstrated that SCF which satisfies the requirements in this European Standard has both hydraulic and pozzolanic properties, and may be used to produce concrete with improved properties in both the fresh and hardened states. SCF is normally used in combi
28、nation with a plasticizer and/or superplasticizer. This European Standard is based on EN 13263-1 “Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria”, with similar structure and requirements. The differences in the material properties is taken into account, for inst
29、ance that silica-calcium fume is partly hydraulic unlike silica fume. When it comes to conformity, this European Standard refers to EN 13263-2 “Silica fume for concrete - Part 2: Conformity evaluation”. DIN EN 16622:2016-02EN 16622:2015 (E) 6 1 Scope This European Standard applies to the silica-calc
30、ium fume (SCF) which is a by-product of the carbothermal process used to produce silica-calcium alloys. This European Standard gives requirements for chemical and physical properties for SCF to be used as a type II addition in concrete conforming to EN 206, or in mortars, grouts and other mixes. Thi
31、s European Standard also states conformity criteria and related rules. This European Standard does not give rules for the use of SCF in concrete. Some general rules for the use of type II additions are given in EN 206. NOTE Supplementary rules related to the use of SCF in concrete may be given in no
32、n-conflicting national standards for concrete. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition
33、of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement Part 1: Determination of strength EN 196-2, Method of testing cement Part 2: Chemical analysis of cement EN 196-6, Methods of testing cement Part 6: Determination of fineness EN 196-7, Methods of testi
34、ng cement Part 7: Methods of taking and preparing samples of cement EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN 413-2, Masonry cement Part 2: Test methods EN 451-1, Method of testing fly ash Part 1: Determination of free calcium oxide content EN
35、 934-2, Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labelling EN 1097-7, Tests for mechanical and physical properties of aggregates Part 7: Determination of the particle density of filler Pyknometer method EN 13263-2, Silic
36、a fume for concrete Part 2: Conformity evaluation ISO 9277, Determination of the specific surface area of solids by gas adsorption BET method ISO 9286, Abrasive grains and crude Chemical analysis of silicon carbide DIN EN 16622:2016-02EN 16622:2015 (E) 7 3 Terms and definitions For the purposes of t
37、his document, the following terms and definitions apply. NOTE Some terms and definitions from EN 132632 to which this European Standard refers are included here for convenience. Where needed they are modified for the application to SCF. 3.1 activity index ratio (in percent) of the compressive streng
38、th of standard mortar bars, prepared with 90 % test cement plus 10 % SCF by mass, to the compressive strength of standard mortar bars prepared with 100 % test cement, when tested at the same age 3.2 allowable probability of acceptance CR for a given sampling plan, allowed probability of acceptance o
39、f SCF with a characteristic value outside the specified characteristic value 3.3 characteristic value value having a prescribed probability of not being attained in a hypothetical unlimited test series Note 1 to entry: Equivalent to “fractile” which is defined in ISO 3534-1. SOURCE: ISO 8930:1987 3.
40、4 control period period of production and dispatch identified for the assessment of the test results 3.5 densified SCF SCF that has been treated to increase the bulk density by particle agglomeration, the bulk density typically being above 500 kg/m33.6 depot bulk SCF handling facility not located at
41、 the production plant used for the dispatch of SCF whether in bulk or bagged after transfer or storage where the manufacturer has full responsibility for all aspects of the quality of the SCF 3.7 initial period immediate period after the first issuing of the declaration of performance for a SCF 3.8
42、determination of product type testing of the first audit sample 3.9 new production plant production plant which is not already producing SCF DIN EN 16622:2016-02EN 16622:2015 (E) 8 3.10 production plant facility producing SCF: a) silica-calcium alloy production plant; b) processing plant, for exampl
43、e for the selection, blending or densifying of SCF 3.11 quality control part of quality management focused on fulfilling quality requirements SOURCE: EN ISO 9000:2015, 3.3.7 3.12 sampling plan specific plan which states the (statistical) sample size(s) to be used, the percentage Pkon which the chara
44、cteristic value is based, and the allowable probability of acceptance CR SOURCE: EN 13263-1:2005+A1:2009, 3.23 3.13 silica-calcium fume (SCF) very fine particles of amorphous silicon dioxide and dicalcium silicate collected as a by-product of the carbothermal process used to produce silica-calcium a
45、lloys Note 1 to entry: SCF may be processed, for example by classification, selection, blending, densifying, or by a combination of these processes, in adequate production plants. Such processed SCF may consist of SCF from different sources, each conforming to the definition given in this subclause.
46、 3.14 single result limit value value of a chemical or physical property which for any single test result in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached SOURCE: EN 13263-1:2005+A1:2009, 3.26 3.15 specified characteristic value char
47、acteristic value of a chemical or physical property which in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached SOURCE: EN 13263-1:2005+A1:2009, 3.27 3.16 spot sample sample taken within a short period of time and at a fixed point from wi
48、thin a larger quantity, relating to the intended tests. It can be obtained by combining one or more immediately consecutive increments SOURCE: EN 196-7:2007, 3.6 DIN EN 16622:2016-02EN 16622:2015 (E) 9 3.17 test technical operation that consists of the determination of a characteristic of a product
49、according to a specified procedure SOURCE: EN 13263-1:2005+A1:2009, 3.29 3.18 test cement cement used for evaluation of the activity index of SCF 3.19 testing laboratory laboratory which measures, examines, tests, calibrates or otherwise determines the characteristics or performance of materials or products SOURCE: EN 13263-1:2005+A1:2009, 3.31 3.20 test method specified technical procedure for performing a test 3.21 type II a
