1、September 2016 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 83.080.01!%Zv“2555883www.din.d
2、eDIN EN ISO 1043-1Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics Amd.1:2016);English version EN ISO 1043-1:2011 + A1:2016,English translation of DIN EN ISO 1043-1:2016-09Kunststoffe Kennbuchstaben und Kurzzeichen Teil 1: Basis-Polymere und ihre besond
3、eren Eigenschaften Englische Fassung EN ISO 1043-1:2011 + A1:2016,Englische bersetzung von DIN EN ISO 1043-1:2016-09Plastiques Symboles et termes abrgs Partie 1: Polymres de base et leurs caractristiques spciales Amd.1:2016);Version anglaise EN ISO 1043-1:2011 + A1:2016,Traduction anglaise de DIN EN
4、 ISO 1043-1:2016-09SupersedesDIN EN ISO 1043-1:2012-03www.beuth.deDocument comprises 27 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.(ISO 1043-1:2011 +(ISO 1043-1:2011 + (ISO 1043-1:2011 + Amd.1:2016);09.16 DIN EN ISO 1043-1
5、:2016-09 2 A comma is used as the decimal marker. National foreword This document (EN ISO 1043-1:2011 + A1:2016) has been prepared by Technical Committee ISO/TC 61 “Plastics”, in collaboration with Technical Committee CEN/TC 249 “Plastics” (Secretariat: NBN, Belgium). The responsible German body inv
6、olved in its preparation was DIN-Normenausschuss Kunststoffe (DIN Standards Committee Plastics), Working Committee NA 054-01-01 AA Terminologie. This standard includes Amendment A1 approved by CEN on 11 January 2016. The start and finish of text introduced or altered by amendment is indicated in the
7、 text by tags !“. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 472 DIN EN ISO 472 Amendments This standard differs from DIN EN ISO 1043-1:2012-03 as follows: a) a new symbol “PS-ST” has been introduced in Clause 5; b) a new symbol “ST”
8、has been introduced in Clause 6. Previous editions DIN 7728-1: 1965-03, 1968-02, 1973-12, 1978-04, 1988-01 DIN EN ISO 1043-1: 2000-01, 2002-06, 2012-03 National Annex NA (informative) Bibliography DIN EN ISO 472, Plastics Vocabulary EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1043-1 Nov
9、ember 2011 + A1 April 2016 ICS 83.080.01 English Version Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011 + Amd.1:2016) Plastiques Symboles et termes abrgs Partie 1: Polymres de base et leurs caractristiques spciales (ISO 1043-1:2011 +
10、Amd.1:2016) Kunststoffe Kennbuchstaben und Kurzzeichen Teil 1: Basis-Polymere und ihre besonderen Eigenschaften (ISO 1043-1:2011 + Amd.1:2016) This European Standard was approved by CEN on 12 November 2011. This amendment A1 modifies the European Standard EN ISO 1043-1:2011; it was approved by CEN o
11、n 11 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m
12、ay be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the
13、CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irela
14、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centr
15、e: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1043-1:2011 + A1:2016 EEN ISO 1043-1:2011 + A1:2016 (E) 2 Contents Page European foreword to EN ISO 1043-1:2011 3 European foreword to EN
16、 ISO 1043-1:2011/A1:2016 . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Use of symbols and abbreviated terms . 5 5 Abbreviated terms for homopolymers, copolymers and natural polymers 6 6 Symbols for indication of special characteristics . 12 7 Symbol for plastics recyclate . 13
17、 8 Examples of the use of symbols . 14 (informative) Guide for preparing new abbreviated terms for basic polymers, Annex Amixtures of polymers and related terms . 15 (informative) List of symbols used for components of abbreviated terms . 17 Annex BB.1 List by symbol 17 B.2 List by component of term
18、 19 (informative) Abbreviated terms for plastics grouped by type . 21 Annex CC.1 Group A 21 C.1.1 Homopolymers 21 C.1.2 Copolymers . 22 C.1.3 Generic names . 22 C.1.4 Cellulose derivatives . 23 C.2 Group B 23 C.2.1 Miscellaneous copolymers 23 C.2.2 Network polymers . 24 Bibliography . 25 DIN EN ISO
19、1043-1:2016-09 ! “EN ISO 1043-1:2011 + A1:2016 (E) 3 European foreword to EN ISO 1043-1:2011 This document (EN ISO 1043-1:2011) has been prepared by Technical Committee ISO/TC 61 “Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This
20、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the element
21、s of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1043-1:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followin
22、g countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia
23、, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1043-1:2011 has been approved by CEN as a EN ISO 1043-1:2011 without any modification. DIN EN ISO 1043-1:2016-09 EN ISO 1043-1:2011 + A1:2016 (E) 4 This Amendment to the European Standard EN ISO 1043-1:
24、2011 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of the elements of
25、this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European S
26、tandard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
27、 Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 1043-1:2011/Amd.1:2016 has been approved by CEN as EN ISO 1043-1:2011/A1:2016 without any modification.“ DIN EN ISO 1043-1:2016-09 European foreword to EN ISO 1043-1:2011/A1:2016 !This document (EN ISO 104
28、3 -1:2011/A1:2016 ) has been prepared by Technica l Committee ISO/TC 61“Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which isheld by NBN. EN ISO 1043-1:2011 + A1:2016 (E) 5 1 Scope This part of ISO 1043 defines abbreviated terms for the basic polymers
29、used in plastics, symbols for components of these terms, and symbols for special characteristics of plastics. It includes only those abbreviated terms that have come into established use and its aim is both to prevent the occurrence of more than one abbreviated term for a given plastic and to preven
30、t a given abbreviated term being interpreted in more than one way. NOTE 1 For symbols and abbreviated terms for fillers and reinforcing materials, see ISO 1043-2, for plasticizers see ISO 1043-3, and for flame retardants see ISO 1043-4. Nomenclature for rubbers and latices is given in ISO 1629. Nome
31、nclature for thermoplastic elastomers is given in ISO 18064. NOTE 2 Guidance for the preparation of new abbreviated terms is given in Annex A, and reference lists of symbols for the components of plastics terms used to form the abbreviated terms for plastics are given in Annex B. NOTE 3 A classifica
32、tion of abbreviated terms for polymers grouped by type is given in Annex C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refere
33、nced document (including any amendments) applies. ISO 472, Plastics Vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 472 and the following apply. 3.1 abbreviated term term resulting from the omission of any part of a term while designating
34、the same concept 4 Use of symbols and abbreviated terms 4.1 Abbreviated terms for homopolymers, copolymers and natural polymers are given in Clause 5, symbols for special characteristics are given in Clause 6, the symbol for plastics recyclate is given in Clause 7, and examples of the use of symbols
35、 are given in Clause 8. 4.2 To distinguish the essential molecular characteristics within a given generic type of plastics material, additional symbols, with guidance for their use, are provided. The use of symbols for describing properties that can only be ascertained subjectively should be avoided
36、 since this can lead to confusion. 4.3 The abbreviated terms are primarily intended to be a convenient shorthand for chemical names in publications and other written matter. The abbreviated terms are also useful for indicating the type of basic polymer in materials and products, e.g. ABS moulding ma
37、terial, PA film, PE sheeting and PVC pipe. 4.4 Only capital letters shall be used for symbols and abbreviated terms. 4.5 The first appearance of an abbreviated term in a text shall be enclosed in parentheses and shall be preceded by the term written in full. DIN EN ISO 1043-1:2016-09 EN ISO 1043-1:2
38、011 + A1:2016 (E) 6 4.6 The rules of the International Union of Pure and Applied Chemistry (IUPAC) for source-based names of polymers recommend the use of parentheses when the prefix “poly” is used with a monomer name consisting of two or more words. This practice is followed in this part of ISO 104
39、3, but in common usage the enclosing marks are often omitted. 4.7 No attempt is made formally to systematize a shorthand terminology of polymers. Terminology and formulae designations for scientific literature in the field of natural and synthetic polymers have been elaborated by the Commission on M
40、acromolecular Nomenclature of IUPAC. Any abbreviated terms published by this Commission are, in general, the same as in this part of ISO 1043. 5 Abbreviated terms for homopolymers, copolymers and natural polymers The following list gives the preferred abbreviated terms for plastics materials, using
41、the component symbols given in Annex B. For some established materials, the abbreviated terms are supplemented by symbols for special characteristics as defined in Clause 6. For some materials, alternative abbreviated terms are often still used, and for information these are included after the name
42、of the material. Abbreviated term Term for material AB acrylonitrile-butadiene plastic ABAK acrylonitrile-butadiene-acrylate plastic; preferred term for ABA ABS acrylonitrile-butadiene-styrene plastic ACS acrylonitrile-(chlorinated polyethylene)-styrene; preferred term for ACPES AEPDS acrylonitrile-
43、(ethylene-propylene-diene)-styrene plastic; preferred term for AEPDMS AMMA acrylonitrile-(methyl methacrylate) plastic ASA acrylonitrile-styrene-acrylate plastic CA cellulose acetate CAB cellulose acetate butyrate CAP cellulose acetate propionate CEF cellulose formaldehyde CF cresol-formaldehyde res
44、in CMC carboxymethyl cellulose CN cellulose nitrate COC cycloolefin copolymer DIN EN ISO 1043-1:2016-09 EN ISO 1043-1:2011 + A1:2016 (E) 7 Abbreviated term Term for material CP cellulose propionate CTA cellulose triacetate EAA ethylene-(acrylic acid) plastic EBAK ethylene-(butyl acrylate) plastic; p
45、referred term for EBA EC ethyl cellulose EEAK ethylene-(ethyl acrylate) plastic; preferred term for EEA EMA ethylene-(methacrylic acid) plastic EP epoxide; epoxy resin E/P ethylene-propylene plastic; preferred term for EPM ETFE ethylene-tetrafluoroethylene plastic EVAC1)ethylene-(vinyl acetate) plas
46、tic; preferred term for EVA EVOH ethylene-(vinyl alcohol) plastic FEP perfluoro(ethylene-propylene) plastic; preferred term for PFEP FF furan-formaldehyde resin HBV poly(3-hydroxybutyrate)-co-(3-hydroxyvalerate) LCP liquid-crystal polymer MABS (methyl methacrylate)-acrylonitrile-butadiene-styrene pl
47、astic MBS (methyl methacrylate)-butadiene-styrene plastic MC methyl cellulose MF melamine-formaldehyde resin MP melamine-phenol resin MSAN -methylstyrene-acrylonitrile plastic PA polyamide PAA poly(acrylic acid) PAEK polyaryletherketone 1) In ISO 1629, the abbreviated term for ethylene-(vinyl acetat
48、e) copolymer is EVM. DIN EN ISO 1043-1:2016-09 EN ISO 1043-1:2011 + A1:2016 (E) 8 Abbreviated term Term for material PAI polyamidimide PAK polyacrylate PAN polyacrylonitrile PAR polyarylate PARA polyarylamide PB polybutene PBAK poly(butyl acrylate) PBD 1,2-polybutadiene PBN poly(butylene naphthalate
49、) PBS poly(butylene succinate) PBSA poly(butylene succinate adipate) PBT poly(butylene terephthalate) PC polycarbonate PCCE poly(cyclohexylene dimethylene cyclohexanedicarboxylate) PCO polycycloolefin PCL polycaprolactone PCT poly(cyclohexylene dimethylene terephthalate) PCTFE polychlorotrifluoroethylene PDAP poly(diallyl phthalate) PDCPD polydicyclopentadiene PE polyethylene PE-C2)polyethylene, chlorinated; preferred term for CPE PE-HD polyethylene, high density; pre
