1、August 2009DEUTSCHE NORM English price group 8No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 27.020!$Y(k“1540572www.d
2、in.deDDIN EN ISO 11102-2Reciprocating internal combustion engines Handle starting equipment Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)English version of DIN EN ISO 11102-2:2009-08Hubkolben-Verbrennungsmotoren Handkurbel-Starteinrichtungen Teil 2: Verfahren zur Messung de
3、s Auslsewinkels (ISO 11102-2:1997)Englische Fassung DIN EN ISO 11102-2:2009-08SupersedesDIN EN ISO 11102-2:1997-11See start of validitywww.beuth.deDocument comprises 11 pagesDIN EN ISO 11102-2:2009-08 2 Start of validity This standard takes effect on 1 August 2009. DIN EN ISO 11102-2:1997-11 may be
4、used in parallel until 28 December 2009. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee ISO/TC 70 “Internal combustion engines” in collaboration with Technical Committee CEN/TC 270 “Internal combustion engines” (Secretariat: DIN,
5、Germany). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Technical Committee NA 060-10-10 AA Verbrennungs-motoren of Section Power Systems. Representatives of manufacturers and users of engines and systems co
6、ntributed to this standard. Amendment of the European Machinery Directive has made it necessary to review the previously valid standard, EN ISO 11102-2:1997, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the
7、essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, and which apply to machines that are either first placed on the market or co
8、mmissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may ass
9、ume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The International Standards referred to in clause 2 and in the bibliography of this document have been published as the corresponding DIN EN ISO or DIN ISO Standards with the same number. Amendments This s
10、tandard differs from DIN EN ISO 11102-2:1997-11 as follows: a) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been added. Previous editions DIN 6285-2: 1989-10 DIN EN ISO 11102-2: 1997-11 EUROPEAN STANDARDNORME EUROP
11、ENNEEUROPISCHE NORMEN ISO 11102-2February 2009ICS 27.020 Supersedes EN ISO 11102-2:1997 English VersionReciprocating internal combustion engines - Handle startingequipment - Part 2: Method of testing the angle ofdisengagement (ISO 11102-2:1997)Moteurs alternatifs combustion interne - Dispositifs ded
12、marrage la manivelle - Partie 2: Mthode dessai delangle de dsengagement (ISO 11102-2:1997)Hubkolben-Verbrennungsmotoren - Handkurbel-Starteinrichtungen - Teil 2: Verfahren zur Messung desAulsewinkels (ISO 11102-2:1997)This European Standard was approved by CEN on 26 January 2009.CEN members are boun
13、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN
14、Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status a
15、s theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovak
16、ia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CE
17、N national Members.Ref. No. EN ISO 11102-2:2009: EDIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Testing of the disengagement travel .4 3.1 Apparatus .4 3.2 Procedure .4 4 Testing of the angle of disengagement.5 5 Tolerances5 6 Numbe
18、r of tests .5 7 Test report 5 Annex A (informative) Bibliography 7 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC8 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Direc
19、tive 2006/42/EC.9 DIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 3 DIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 4 DIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 5 DIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 6 DIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 7 DIN EN ISO 11102-
20、2:2009-08 EN ISO 11102-2:2009 (E) 8 Annex ZA Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means
21、 of conforming to Essential Requirements of the New Approach Directive 98/37/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normati
22、ve clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling
23、 within the scope of this standard. (informative) DIN EN ISO 11102-2:2009-08 EN ISO 11102-2:2009 (E) 9 Annex ZB This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requi
24、rements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard con
25、fers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations.WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.(informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC
