1、European Standard EN ISO 12215-4 : 2002 has the status of a DIN Standard.National forewordThis standard has been published in accordance with a decision taken by CEN/BT/WG 69 Small Craft(Secretariat: Sweden) to adopt, without alteration, International Standard ISO 12215-4 as a EuropeanStandard.The r
2、esponsible German body involved in its preparation was the Normenstelle Schiffs- und Meerestechnik(Shipbuilding and Marine Technology Standards Committee).DIN EN ISO 12215-1 is the standard corresponding to International Standard ISO 12215-1 referred to inclause 2 of the EN.National Annex NAStandard
3、 referred to(and not included in Normative references)DIN EN ISO 12215-1 Small craft Hull construction and scantlings Part 1: Materials: Thermosettingresins, glass-fibre reinforcement, reference laminate (ISO 12215-1 : 2000)ICS 47.080Kleine Wasserfahrzeuge Rumpfbauweise und Dimensionierung Teil 4: W
4、erkstatt und Fertigung(ISO 12215-4 : 2002)Ref. No. DIN EN ISO 12215-4 : 2002-09English price group 09 Sales No. 110901.03DEUTSCHE NORM September 2002EN ISO 12215-4EN comprises 13 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V.,
5、Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Small craft Hull construction and scantlingsPart 4: Workshop and manufacturing(ISO 12215-4 : 2002)English version of DIN EN ISO 12215-4English versionICS 47.080Management Centre: rue de
6、 Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungSmall craft Hull construction and scantlingsPart 4: Workshop and manufacturing(ISO 12215-4 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved
7、worldwide for CEN national members.Ref. No. EN ISO 12215-4 : 2002 EPetits navires Construction decoques et chantillons Partie 4:Ateliers de construction et fabrication(ISO 12215-4 : 2002)Kleine Wasserfahrzeuge Rumpf-bauweise und Dimensionierung Teil 4: Werkstatt und Fertigung(ISO 12215-4 : 2002)This
8、 European Standard was approved by CEN on 2002-05-01.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references conce
9、rning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language
10、 and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Swe
11、den, Switzer-land, and the United Kingdom.May 2002EN ISO 12215-4Page 2EN ISO 12215-4 : 2002ForewordInternational StandardISO 12215-4 : 2002 Small craft Hull construction and scantlings Part 4: Workshop and manufacturing,which was prepared by ISO/TC 188 Small craft of the International Organization f
12、or Standardization, has beenadopted by CEN/BT as a European Standard.This European Standard has been prepared under a mandate given to CEN by the Commission of EuropeanCommunities and the European Free Trade Association and supports essential requirements of the relevant ECDirective.This European St
13、andard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by November 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the foll
14、ow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text
15、of the International Standard ISO 12215-4 : 2002 was approved by CEN as a European Standardwithout any modification.23338101112121213Page 3EN ISO 12215-4 : 2002Page 4EN ISO 12215-4 : 2002Page 5EN ISO 12215-4 : 2002Page 6EN ISO 12215-4 : 2002Page 7EN ISO 12215-4 : 2002Page 8EN ISO 12215-4 : 2002Page 9EN ISO 12215-4 : 2002Page 10EN ISO 12215-4 : 2002Page 11EN ISO 12215-4 : 2002Page 12EN ISO 12215-4 : 2002Page 13EN ISO 12215-4 : 2002
