1、ICS 21.060.50; 21.060.70; 55.180.20Prfungen von Verbindungen an Paletten Teil 3: Bestimmung der Festigkeit der Palettenverbindungen(ISO 12777-3 : 2002)European Standard EN ISO 12777-3 : 2002 has the status of a DIN Standard.National forewordThis standard has been published in accordance with a decis
2、ion taken by CEN/TC 261 to adopt, withoutalteration, International Standard ISO 12777-3 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen(Packaging Standards Committee), Technical Committee Paletten.The DIN Standards corresponding
3、 to the International Standards referred to in clause 2 of the EN are asfollows:ISO Standard DIN StandardISO 445 DIN EN ISO 445ISO 1133 DIN EN ISO 1133ISO 12777-1 DIN EN ISO 12777-1ISO 12777-2 DIN EN ISO 12777-2National Annex NAStandards referred to(and not included in Normative references and Bibli
4、ography)DIN EN ISO 445 Pallets for materials handling Vocabulary (ISO 445 : 1996)DIN EN ISO 1133 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flowrate (MVR) of thermoplastics (ISO 1133 : 1997)DIN EN ISO 12777-1 Methods of test for pallet joints Determination of bending
5、 resistance of pallet nails,other dowel-type fasteners and staples (ISO 12777-1 : 1994)DIN EN ISO 12777-2 Methods of test for pallet joints Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2 : 2000)Ref. No. DIN EN ISO 12777-3 : 2003-06Englis
6、h price group 11 Sales No. 111110.03DEUTSCHE NORM June 2003EN ISO 12777-3Continued overleaf.EN comprises 13 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive rig
7、ht of sale for German Standards (DIN-Normen).Methods of test for pallet jointsPart 3: Determination of strength of pallet joints(ISO 12777-3 : 2002)English version of DIN EN ISO 12777-3English versionICS 55.180.20Descriptors:Methods of test for pallet jointsPart 3: Determination of strength of palle
8、t joints(ISO 12777-3 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 12777-3 : 2002 EPrfungen von Verbindungen anPaletten Teil 3: Bestimmung derFestigkeit der Palettenverbindun-gen (ISO 12777-3 : 2002)This European
9、Standard was approved by CEN on 2002-11-15.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such
10、 national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and not
11、ified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden,Swit
12、zerland, and the United Kingdom.EN ISO 12777-3December 2002Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Mthodes dessai des assemblages depalettes Partie 3: Dtermination de larsistance des asse
13、mblages de palettes(ISO 12777-3 : 2002)Page 2EN ISO 12777-3 : 2002ForewordInternational StandardISO 12777-3 : 2002 Methods of test for pallet joints Part 3: Determination of strength of pallet joints,which was prepared by ISO/TC 51 Pallets for unit load method of materials handling of the Internatio
14、nalOrganization for Standardization, has been adopted by Technical Committee CEN/TC 261 Packaging, theSecretariat of which is held by AFNOR, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, an
15、d conflicting national standards withdrawn, by June 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France,
16、 Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 12777-3 : 2002 was approved by CEN as a European Standardwithout any modification.Page 3EN ISO 12777-3 : 2002Page 4EN ISO 12777-3 : 2002Page 5EN ISO 12777-3 : 2002Page 6EN ISO 12777-3 : 2002Page 7EN ISO 12777-3 : 2002Page 8EN ISO 12777-3 : 2002Page 9EN ISO 12777-3 : 2002Page 10EN ISO 12777-3 : 2002Page 11EN ISO 12777-3 : 2002Page 12EN ISO 12777-3 : 2002Page 13EN ISO 12777-3 : 2002
