1、ICS 01.100.01; 17.040.20Geometrische Produktspezifikation (GPS) Angabe derOberflchenbeschaffenheit in der technischen Produktdokumentation(ISO 1302 : 2002)European Standard EN ISO 1302 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has be
2、en published in accordance with a decision taken by CEN/TC 290 to adopt, withoutalteration, International Standard ISO 1302 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen(Fundamentals in Technology Standards Committee), Te
3、chnical Committee GeometrischeProduktspezifikation und -prfung.The DIN Standards corresponding to the International Standards referred to in clause 2 and in thebibliography of the EN are as follows:ISO Standard(s) DIN Standard(s)ISO 129 and ISO 129-1*) DIN 406-10 to DIN 406-12ISO 1101 DIN ISO 1101IS
4、O 3098-2 DIN EN ISO 3098-2ISO 3274 DIN EN ISO 3274ISO 4287 DIN EN ISO 4287ISO 4288 DIN EN ISO 4288ISO 5436-1 DIN EN ISO 5436-1ISO 5436-2 DIN EN ISO 5436-2ISO 8785 DIN EN ISO 8785ISO 10209-1 DIN 199-1ISO 11562 DIN EN ISO 11562ISO 12085 DIN EN ISO 12085ISO 12179 DIN EN ISO 12179ISO 13565-1 DIN EN ISO
5、13565-1ISO 13565-2 DIN EN ISO 13565-2ISO 13565-3 DIN EN ISO 13565-3ISO 14253-1 DIN EN ISO 14253-1ISO/TR 14638 DIN V 32950ISO 14660-1 DIN EN ISO 14660-1ISO 81714-1 DIN EN ISO 81714-1Ref. No. DIN EN ISO 1302 : 2002-06English price group 19 Sales No. 111911.02DEUTSCHE NORM June 2002EN ISO 1302Continued
6、 overleaf.EN comprises 49 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Geometrical Product Specifications (G
7、PS)Indication of surface texture in technicalproduct documentation(ISO 1302 : 2002)English version of DIN EN ISO 1302Supersedes DIN ISO 1302,December 1993 edition.*) Currently at draft stage.AmendmentsISO 1302 having been adopted as a European Standard, the status of the corresponding DIN Standard(D
8、IN ISO 1302) has been changed accordingly.Previous editionsDIN 140-1: 1921-02, 1931-10; DIN 140-2: 1922-12, 1931x-10; DIN 140-3: 1931-10; DIN 140-4: 1931x-10;DIN 140-5. 1931-10; DIN 140-6: 1931-10; DIN 140-7: 1952-11, 1960-12, 1961-09, 1966-05;DIN 200-1: 1924-03; DIN 200-2: 1924-04; DIN 3142: 1960-0
9、3; DIN ISO 1302: 1977-07, 1980-06, 1993-12.National Annex NAStandards referred to(and not included in Normative references and Bibliography)DIN 199-1 Terminology associated with drawings and item lists DrawingsDIN 406-10 Engineering drawing practice Dimensioning Concepts and general principlesDIN 40
10、6-11 Engineering drawing practice Dimensioning Principles of applicationDIN 406-12 Engineering drawing practice Dimensioning Tolerancing of linear and angulardimensions (ISO 406 : 1987, modified)DIN V 32950 Geometrical product specifications (GPS) Masterplan (ISO/TR 14638 : 1995)DIN EN ISO 3098-2 Te
11、chnical product documentation Lettering Part 2: Latin alphabet, numerals andmarks (ISO 3098-2 : 2000)DIN EN ISO 3274 GPS Surface texture: Profile method Nominal characteristics of contact (stylus)instruments (ISO 3274 : 1996)DIN EN ISO 4287 GPS Surface texture: Profile method Terms, definitions and
12、surface textureparameters (ISO 4287 : 1997)DIN EN ISO 4288 GPS Surface texture: Profile method Rules and procedures for the assessment ofsurface texture (ISO 4288 : 1996)DIN EN ISO 5436-1 GPS Surface texture: Profile method Measurement standards Part 1: Materialmeasures (ISO 5436-1 : 2000)DIN EN ISO
13、 5436-2 GPS Surface texture: Profile method Measurement standards Part 2: Softwaremeasurement standards (ISO 5436-2 : 2001)DIN EN ISO 8785 Geometrical Product Specifications (GPS) Surface imperfections Terms, definitionsand parameters (ISO 8785 : 1998)DIN EN ISO 11562 GPS Surface texture: Profile me
14、thod Metrological characteristics of phase correctfilters (ISO 11562 : 1996)DIN EN ISO 12085 GPS Surface texture: Profile method Motif parameters (ISO 12085 : 1996)DIN EN ISO 12179 GPS Surface texture: Profile method Calibration of contact (stylus) instruments(ISO 12179 : 2000)DIN EN ISO 13565-1 GPS
15、 Surface texture: Profile method Surfaces having stratified functionalproperties Part 1: Filtering and general measurement conditions (ISO 13565-1 : 1996)DIN EN ISO 13565-2 GPS Surface texture: Profile method Surfaces having stratified functionalproperties Part 2: Height characterization using the l
16、inear material ratio(ISO 13565-2 : 1996)DIN EN ISO 13565-3 GPS Surface texture: Profile method Surfaces having stratified functionalproperties Part 3: Height characterization using the material probability curve(ISO 13565-3 : 1998)DIN EN ISO 14253-1 Geometrical product specifications (GPS) Inspectio
17、n by measurement of workpiecesand measuring equipment Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1 : 1998)DIN EN ISO 14660-1 Geometrical product specifications (GPS) Geometrical features Part 1: General termsand definitions (ISO 14660-1 : 1999)DI
18、N EN ISO 81714-1 Design of graphical symbols for use in the technical documentation of products Part 1:Basic rules (ISO 81714-1 : 1999)Page 2DIN EN ISO 1302 : 2002-06English versionICS 01.100.20; 17.040.20Descriptors:Geometrical Product Specifications (GPS)Indication of surface texture in technicalp
19、roduct documentation(ISO 1302 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 1302 : 2002 EGeometrische Produktspezifikation(GPS) Angabe der Oberflchen-beschaffenheit in der technischenProduktdokumentation(ISO 1302
20、: 2002)This European Standard was approved by CEN on 2002-01-17.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical refer
21、ences concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its
22、 own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portuga
23、l, Spain, Sweden,Switzerland, and the United Kingdom.EN ISO 1302February 2002Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Spcification gomtrique desproduits (GPS) Indication des tatsde surface
24、 dans la documentationtechnique de produits(ISO 1302 : 2002)Page 2EN ISO 1302 : 2002ForewordInternational StandardISO 1302 : 2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical productdocumentation,which was prepared by ISO/TC 213 Dimensional and geometrical prod
25、uct specifications and verification of theInternational Organization for Standardization, has been adopted by Technical Committee CEN/TC 290Dimensional and geometrical product specification and verification, the Secretariat of which is held by AFNOR,as a European Standard.This European Standard shal
26、l be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by August 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countrie
27、s are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the Internat
28、ional Standard ISO 1302 : 2002 was approved by CEN as a European Standard withoutany modification.2344568914151717172326293336394042444749Page 3EN ISO 1302 : 2002Page 4EN ISO 1302 : 2002Page 5EN ISO 1302 : 2002Page 6EN ISO 1302 : 2002Page 7EN ISO 1302 : 2002Page 8EN ISO 1302 : 2002Page 9EN ISO 1302
29、: 2002Page 10EN ISO 1302 : 2002Page 11EN ISO 1302 : 2002Page 12EN ISO 1302 : 2002Page 13EN ISO 1302 : 2002Page 14EN ISO 1302 : 2002Page 15EN ISO 1302 : 2002Page 16EN ISO 1302 : 2002Page 17EN ISO 1302 : 2002Page 18EN ISO 1302 : 2002Page 19EN ISO 1302 : 2002Page 20EN ISO 1302 : 2002Page 21EN ISO 1302 : 2002Page 22EN ISO 1302 : 2002Page 23EN ISO 1302 : 2002Page 24EN ISO 1302 : 2002Page 25EN ISO 1302 : 2002Page 26EN ISO 1302 : 2002Page 27EN ISO 1302 : 2002Page 28EN ISO 1302 : 2002
