1、ICS 01.080.99; 47.080Small craftBuilders plate(ISO 14945 : 2004)English version of DIN EN ISO 14945Kleine Wasserfahrzeuge Hersteller-Schild (ISO 14945 : 2004)European Standard EN ISO 14945 : 2004 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard ha
2、s been published in accordance with a decision taken by CEN/BT to adopt, without altera-tion, International Standard ISO 14945 as a European Standard.The responsible German body involved in its preparation was the Normenstelle Schiffs- und Meerestechnik(Shipbuilding and Marine Technology Standards C
3、ommittee), Technical Committee Hauptmae undKennzeichnung der Boote.DIN EN ISO 8666 and DIN EN ISO 14946 are the standards corresponding to International StandardsISO 8666 and ISO 14946, respectively, referred to in clause 2 of the EN.National Annex NAStandards referred to(and not included in Normati
4、ve references)DIN EN ISO 8666 Small craft Principal data (ISO 8666 : 2002)DIN EN ISO 14946 Small craft Maximum load capacity (ISO 14946 : 2001)DEUTSCHE NORM July 2004DIN EN ISO 14945 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Ber
5、lin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Normenausschuss Bauwesen (NABau) im DINEnglish price group 8www.din.dewww.beuth.de10.04 9578614Continued overleaf.Document comprises 8 pages.English versionICS 47.080Management Centre: rue
6、 de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungSmall craftBuilders plate(ISO 14945 : 2004) 2004. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 1
7、4945 : 2004 EPetits navires Plaque du construc-teur (ISO 14945 : 2004)Kleine Wasserfahrzeuge Hersteller-Schild (ISO 14945 : 2004)This European Standard was approved by CEN on 2004-03-01.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving
8、 this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (Engli
9、sh, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech
10、Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.April 2004EN ISO 14945Page 2EN ISO 14945 : 2004Foreword
11、International StandardISO 14945 : 2003 Small craft Builders plate,which was prepared by ISO/TC 188 Small craft of the International Organization for Standardization, has beenadopted by Technical Committee CMC as a European Standard.This European Standard has been prepared under a mandate given to CE
12、N by the European Commission andthe European Free Trade Association and supports essential requirements of the relevant EU Directive. Forrelationship with this directive, see Annex ZA.This European Standard shall be given the status of a national standard, either by publication of an identicaltext o
13、r by endorsement, and conflicting national standards withdrawn, by October 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Re
14、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard
15、 ISO 14945 : 2004 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (informative).223334456Page 3EN ISO 14945 : 2004Page 4EN ISO 14945 : 2004Page 5EN ISO 14945 : 2004Page 6EN ISO 14945 : 2004Page 7EN ISO 14945 : 2004
