1、September 2014 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).
2、ICS 27.190; 75.160.10!%:vZ“2238355www.din.deDDIN EN ISO 17225-5Solid biofuels Fuel specifications and classes Part 5: Graded firewood (ISO 17225-5:2014);English version EN ISO 17225-5:2014,English translation of DIN EN ISO 17225-5:2014-09Biogene Festbrennstoffe Brennstoffspezifikationen und -klassen
3、 Teil 5: Klassifizierung von Stckholz (ISO 17225-5:2014);Englische Fassung EN ISO 17225-5:2014,Englische bersetzung von DIN EN ISO 17225-5:2014-09Biocombustibles solides Classes et spcifications des combustibles Partie 5: Classes de bois de chauffage (ISO 17225-5:2014);Version anglaise EN ISO 17225-
4、5:2014,Traduction anglaise de DIN EN ISO 17225-5:2014-09SupersedesDIN EN 14961-5:2011-09www.beuth.deDocument comprises 18 pagesIn case of doubt, the German-language original shall be considered authoritative.08.14 DIN EN ISO 17225-5:2014-09 2 A comma is used as the decimal marker. National foreword
5、This document (EN ISO 17225-5:2014) has been prepared by Technical Committee ISO/TC 238 “Solid biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” (Secretariat: SIS, Sweden). This standard, together with further standards under preparation within Technical Committee ISO/T
6、C 238, supersedes the DIN EN 14961 series “Solid biofuels Fuel specifications and classes”. The responsible German body involved in its preparation was the Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-05-82 AA Biogene Festbrennstoffe. The DIN S
7、tandards corresponding to the International Standards referred to in this document are as follows: ISO 16559 DIN EN ISO 16559 ISO 17225-1 DIN EN ISO 17225-1 ISO 18125 DIN EN ISO 18125 ISO 18134-1 DIN EN ISO 18134-1 ISO 18134-2 DIN EN ISO 18134-2 NOTE Some of these ISO Standards are still in preparat
8、ion and the final versions have not yet been published. Please note that the title of the final version of a document might be different from that of the draft version. Amendments This standard differs from DIN EN 14961-5:2011-09 as follows: a) the German translation of “solid biofuels” has been cha
9、nged throughout the document from Feste Biobrennstoffe to Biogene Festbrennstoffe; b) the field of application has been extended to include commercial applications; c) Clause 3 “Terms and definitions” has been extended to include “3.2 commercial application”; d) the term “graded” has been translated
10、 in the German version as klassifiziert; e) the term “virgin” has been translated in the German version as naturbelassen; f) informative and normative property classes have been added; g) the number of parameter classes and all specifications regarding parameters have been modified; h) informative a
11、nnexes have been added, including a simplified method for measuring the diameter of firewood and the calculation of energy density; i) the standard has been editorially revised. Previous editions DIN EN 14961-5: 2011-09 DIN EN ISO 17225-5:2014-09 3 National Annex NA (informative) Bibliography DIN EN
12、 ISO 16559, Solid biofuels Terminology, definitions and description DIN EN ISO 17225-1, Solid biofuels Fuel specifications and classes Part 1: General requirements DIN EN ISO 18125, Solid biofuels Determination of calorific value DIN EN ISO 18134-1, Solid biofuels Determination of moisture content O
13、ven dry method Part 1: Total moisture Reference method DIN EN ISO 18134-2, Solid biofuels Determination of moisture content Oven dry method Part 2: Total moisture Simplified method DIN EN ISO 17225-5:2014-09 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO
14、17225-5 May 2014 ICS 27.190; 75.160.10 Supersedes EN 14961-5:2011English Version Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2014) Biocombustibles solides - Classes et spcifications des combustibles - Partie 5: Classes de bois de chauffageThis European Sta
15、ndard was approved by CEN on 29 March 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
16、such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its
17、own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany
18、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NO
19、RMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17225-5:2014 E(ISO 17225-5:2014) Biogene Festbrennstoffe - Brennstoffspezifikationen und-klassen - Teil
20、 5: Klassifizierung von Stckholz(ISO 17225-5:2014) EN ISO 17225-5:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Symbols and abbreviated terms 6 5 Specification of graded firewood .6 Annex A (informative) Comparison of moisture con
21、tent as received and dry basis 9 Annex B (informative) Measurement of firewood .11 Annex C (informative) Calculation of energy density .12 Bibliography 14 DIN EN ISO 17225-5:2014-09 EN ISO 17225-5:2014 (E) 3 Foreword This document (EN ISO 17225-5:2014) has been prepared by Technical Committee ISO/TC
22、 238 “Solid biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014,
23、and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.
24、This document supersedes EN 14961-5:2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). EN ISO 17225 consists of the following parts, under the general title Sol
25、id biofuels Fuel specifications and classes: Part 1: General requirements Part 2: Graded wood pellets Part 3: Graded wood briquettes Part 4: Graded wood chips Part 5: Graded firewood Part 6: Graded non-woody pellets Part 7: Graded non-woody briquettes According to the CEN-CENELEC Internal Regulation
26、s, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
27、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17225-5:2014 has been approved by CEN as EN ISO 17225-5:2014 without any modification. DIN EN ISO 17
28、225-5:2014-09 IntroductionThe objective of the ISO 17225 series is to provide unambiguous and clear classification principles for solid biofuels; to serve as a tool to enable efficient trading of biofuels; to enable good understanding between seller and buyer as well as a tool for communication with
29、 equipment manufacturers. It will also facilitate authority permission procedures and reporting.This part of ISO 17225 supports the use of graded firewood for residential, small commercial and public building applications.The residential, small commercial and public building applications require hig
30、her quality fuel for the following reasons: Small-scale equipment does not usually have advanced controls and flue gas cleaning Appliances are not generally managed by professional heating engineers Appliances are often located in residential and populated districtsNOTE 1 Firewood produced according
31、 to this part of ISO 17225 may be used in stoves, fireplaces, cookers, roomheaters and multifired sauna stoves, which are tested according to European standards EN 132291, EN 128152, EN 128093, EN 132404, EN 152505and EN 158216, and boilers systems tested according to EN 30357.NOTE 2 For individual
32、contracts ISO 17225-1 can be used.Although these product standards may be obtained separately, they require a general understanding of the standards based on and supporting ISO 17225-1. It is recommended to obtain and use ISO 17225-1 in conjunction with these standards.EN ISO 17225-5:2014 (E) 4 DIN
33、EN ISO 17225-5:2014-09 1 ScopeThis part of ISO 17225 determines the fuel quality classes and specifications of graded firewood. This part of ISO 17225 covers only firewood produced from the following raw materials (see ISO 17225-1, Table 1): 1.1.1 Whole trees without roots 1.1.3 Stem wood 1.1.4 Logg
34、ing residues (thick branches, tops etc.) 1.2.1 Chemically untreated wood residues2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undate
35、d references, the latest edition of the referenced document (including any amendments) applies.ISO 16559, Solid biofuels Terminology, definitions and descriptions1)ISO 17225-1, Solid biofuels Fuel specifications and classes Part 1: General requirementsISO 18134-1, Solid biofuels Determination of moi
36、sture content Oven dry method Part 1: Total moisture Reference method2)ISO 18134-2, Solid biofuels Determination of moisture content Oven dry method Part 2: Total moisture - Simplified method3)3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 16559 and
37、the following apply.3.1firewoodcut and split oven-ready fuelwood used in household wood burning appliances like stoves, fireplaces and central heating systemsNote 1 to entry: Firewood usually has a uniform length, typically in the range of 15 cm to 100 cm.1) To be published.2) To be published.3) To
38、be published.EN ISO 17225-5:2014 (E) 5 DIN EN ISO 17225-5:2014-09 3.2commercial applicationfacility that utilize solid biofuel burning appliances or equipment that have similar fuel requirements as residential appliancesNote 1 to entry: Commercial applications should not be confused with industrial
39、applications, which can utilize a much wider array of materials and have vastly different fuel requirements.4 Symbols and abbreviated termsThe symbols and abbreviated terms used in this part of ISO 17225 comply with the SI system of units as far as possible.d dry (dry basis)ar as receivedw-% weight-
40、percentageD Designation for diameter (D) as received mmE Designation for energy density as received, EarMJ/m3or kWh/m3loose or stacked volume or MJ/kg, kWh/kgL Designation for length (L) as received cmM Designation for moisture content as received on wet basis, Marw-%U Designation for moisture conte
41、nt on dry basis, Ud,w-%Q Designation for net calorific value as received, qp,net,arMJ/kg or kWh/kg or MWh/t at constant pres-sureNOTE 1 1 MJ/kg equals 0,2778 kWh/kg (1 kWh/kg equals 1 MWh/t and 1 MWh/t is 3,6 MJ/kg). 1 g/cm3equals 1 kg/dm3.NOTE 2 Designation symbols are used in combination with a nu
42、mber to specify property levels in Table 1. 5 Specification of graded firewoodSpecification of the firewood is stated in accordance with Table 1 and Figure 1. The determination of the properties shall be carried out in accordance with the methods mentioned in the normative references.Ash, N, S, Cl a
43、nd minor elements are not required as firewood is produced from virgin material which has been grown in uncontaminated soil and therefore the likelihood of contamination is very low.Firewood specified according to classes A1 and A2 are suitable to be used in stoves and fireplaces and class B in log
44、wood boilers.How to state the dimensions of firewood is expressed in Figure 1.EN ISO 17225-5:2014 (E) 6 DIN EN ISO 17225-5:2014-09 KeyD maximum diameterL maximum lengthFigure 1 Dimensions of firewoodNOTE Firewood amounts are given in cubic metres or in kilograms. A cubic metre of stacked wood means
45、a stack of wood that occupies a space of one cubic metre. A cubic metre of loose wood is equal to a box one cubic metre in size into which the split logs are “thrown”. This is also referred to as an “unstacked cubic metre”. Naturally, the conversion rates between the volumes will be affected by the
46、size of the logs and how they are arranged. Comparison of different cubic meters is shown in informative Annex B.If the properties being specified are sufficiently known through information about the origin and handling (or preparation method combined with experience) then analysis may not be needed
47、.To ensure resources are used appropriately and the declaration is accurate, use the most appropriate measure below:1) using previous measured values or obtained by experience of same raw material;2) calculation of properties, e.g. by using typical values and considering generally accepted and docum
48、ented specific values;3) carrying out of analysis:a) with simplified methods if available;b) with reference methods.The responsibility of the producer or supplier to provide correct and accurate information is exactly the same whether laboratory analysis is performed or not. Typical values do not release the producer or supplier from providing accurate and reliable information.Chemical treatment before harvesting of biomass does not need to be stated
