1、November 2016 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.040.70!%q5“2587818www.din.de
2、DIN EN ISO 18752Rubber hoses and hose assemblies Wire or textilereinforced singlepressure types for hydraulic applications Specification (ISO 18752:2014);English version EN ISO 18752:2016,English translation of DIN EN ISO 18752:2016-11Gummischluche und schlauchleitungen Draht oder textilverstrkte Ei
3、nzeldrucktypen fr hydraulische Anwendungen Anforderungen (ISO 18752:2014);Englische Fassung EN ISO 18752:2016,Englische bersetzung von DIN EN ISO 18752:2016-11Tuyaux et flexibles en caoutchouc Types hydrauliques avec armature de fils mtalliques tresss Spcifications (ISO 18752:2014);Version anglaise
4、EN ISO 18752:2016,Traduction anglaise de DIN EN ISO 18752:2016-11www.beuth.deDocument comprises tv pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16DIN EN ISO 18752:2016-11 2 A comma is used as the decimal marker. National
5、foreword This document (EN ISO 18752:2016) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” (Secretariat: BSI, United Kingdom). The responsible German body involved in
6、its preparation was DIN-Normenausschuss Elastomer-Technik (DIN Standards Committee Elastomer Technology), Working Committee NA 045-02-12 AA Gummi- und Kunststoffschluche sowie Schlauchleitungen (Spiegelgremium zu CEN/TC 218, ISO/TC 45/SC 1). International Standard ISO 18752 has been adopted as a Eur
7、opean Standard for the first time and, with its publication as the corresponding DIN EN ISO Standard with the same number, it has been included in the body of German Standards. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 1402 DIN EN
8、 ISO 1402 ISO 1817 DIN ISO 1817 ISO 4671 DIN EN ISO 4671 ISO 6803 DIN EN ISO 6803 ISO 7233 DIN EN ISO 7233 ISO 7326:2006 DIN EN ISO 7326:2009-10 ISO 8033:2006 DIN EN ISO 8033:2006-11 ISO 8330 DIN EN ISO 8330 ISO 8331 DIN EN ISO 8331 ISO 10619-1 DIN EN ISO 10619-1 ISO 10619-2:2011 DIN EN ISO 10619-2:
9、2012-10 DIN EN ISO 18752:2016-11 3 National Annex NA (informative) Bibliography DIN EN ISO 1402, Rubber and plastics hoses and hose assemblies Hydrostatic testing DIN EN ISO 4671, Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose
10、assemblies DIN EN ISO 6803, Rubber or plastics hoses and hose assemblies Hydraulic-pressure impulse test without flexing DIN EN ISO 7233, Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum DIN EN ISO 7326:2009-10, Rubber and plastics hoses Assessment of ozone resista
11、nce under static conditions (ISO 7326:2006) DIN EN ISO 8033:2006-11, Rubber and plastics hoses Determination of adhesion between components (ISO 8033:2006) DIN EN ISO 8330, Rubber and plastics hoses and hose assemblies Vocabulary DIN EN ISO 8331, Rubber and plastics hoses and hose assemblies Guideli
12、nes for selection, storage, use and maintenance DIN EN ISO 10619-1, Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature DIN EN ISO 10619-2:2012-10, Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Par
13、t 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) DIN ISO 1817, Rubber, vulcanized or thermoplastic Determination of the effect of liquids DIN EN ISO 18752:2016-11 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 18752 July 2016 ICS 23.040.7
14、0 English Version Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification (ISO 18752:2014) Tuyaux et flexibles en caoutchouc Types hydrauliques avec armature de fils mtalliques tresss Spcifications (ISO 18752:2014) Gummischluche und
15、 -schlauchleitungen Draht- oder textilverstrkte Einzeldrucktypen fr hydraulische Anwendungen Anforderungen (ISO 18752:2014) This European Standard was approved by CEN on 12 June 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
16、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three officia
17、l versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Au
18、stria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe
19、den, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for C
20、EN national Members. Ref. No. EN ISO 18752:2016 EEN ISO 18752:2016 (E) 2 Contents Page European foreword . 3 Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Classification . 6 5 Materials and construction 7 6 Dimensions and tolerances . 8 7 Physical properties 11 8 Freque
21、ncy of testing 14 9 Marking 14 10 Recommendations for packaging and storage 15 11 Test report 15 Annex A (normative) Type tests and routine tests . 16 Annex B (informative) Production acceptance tests 17 Annex C (informative) Recommendations for tolerances on lengths of hose assemblies 18 Annex D (i
22、nformative) Information to be provided by hose manufacturer 19 Bibliography . 20 DIN EN ISO 18752:2016-11 EN ISO 18752:2016 (E) 3 European foreword The text of ISO 18752:2014 has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” of the International Organization for Standar
23、dization (ISO) and has been taken over as EN ISO 18752:2016 by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text o
24、r by endorsement, at the latest by January 2017, and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible
25、 for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo
26、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 1875
27、2:2014 has been approved by CEN as EN ISO 18752:2016 without any modification. DIN EN ISO 18752:2016-11 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normal
28、ly carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the
29、 work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the d
30、ifferent approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document
31、 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/pa
32、tents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO princi
33、ples in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Hoses (rubber and plastics).This third edition cancels and replaces the second edition (IS
34、O 18752:2012), of which it constitutes a minor revision, to include data of “Class 490” in Table 7.EN ISO 18752:2016 (E) DIN EN ISO 18752:2016-11 41 ScopeThis International Standard specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and
35、 hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from 40 C to +100 C for types AS, AC, BS and BC and 40
36、 C to +120 C for types CS, CC and DC.This International Standard does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components.NOTE
37、It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the editi
38、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1402, Rubber and plastics hoses and hose assemblies Hydrostatic testingISO 1817, Rubber, vulcanized or thermoplastic Determination of the effect of liquidsISO 4671, Rubber a
39、nd plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assembliesISO 6803, Rubber or plastics hoses and hose assemblies Hydraulic-pressure impulse test without flexingISO 7233, Rubber and plastics hoses and hose assemblies Determination of res
40、istance to vacuumISO 7326:2006, Rubber and plastics hoses Assessment of ozone resistance under static conditionsISO 8033:2006, Rubber and plastics hoses Determination of adhesion between componentsISO 8330, Rubber and plastics hoses and hose assemblies VocabularyISO 8331, Rubber and plastics hoses a
41、nd hose assemblies Guidelines for selection, storage, use and maintenanceISO 10619-1, Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperatureISO 10619-2:2011, Rubber and plastics hoses and tubing Measurement of flexibility and stiffn
42、ess Part 2: Bending tests at sub-ambient temperaturesISO 17165-1, Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirementsEN ISO 18752:2016 (E) DIN EN ISO 18752:2016-11 5 3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 8330 apply.4 Cl
43、assification4.1 ClassesTen classes of hose are specified, distinguished by their maximum working pressure, as shown in Table 1. Each class may be manufactured in up to 14 nominal sizes.Table 1 Classes and nominal sizesClass 35 70 140 210 250 280 350 420 490 560MWPa(MPa) 3,5 7 14 21 25 28 35 42 49 56
44、MWPa(bar) 35 70 140 210 250 280 350 420 490 560Nominal size5 X X X X X X X X N/A N/A6,3 X X X X X X X X N/A N/A8 X X X X X X X X N/A N/A10 X X X X X X X X N/A N/A12,5 X X X X X X X X N/A N/A16 X X X X X X X X X X19 X X X X X X X X X X25 X X X X X X X X X X31,5 X X X X X X X X X X38 X X X X X X X X N
45、/A N/A51 X X X X X X X X N/A N/A63 X X X X X X X N/A N/A N/A76 X X X N/A N/A N/A N/A N/A N/A N/A102 X N/A N/A N/A N/A N/A N/A N/A N/A N/ANOTE X = Applicable; N/A = Not applicable.aMaximum working pressure.4.2 Grades and typesHoses are classified into four gradesaccording to their resistance to impul
46、se: A, B, C and D. Each grade is classified by outside diameter into standard types (AS, BS and CS) and compact types (AC, BC, CC and DC), as shown in Table 2.EN ISO 18752:2016 (E) DIN EN ISO 18752:2016-11 6Table 2 Grades and typesGrade TypeaResistance to impulseTemperature CImpulse pressure (% of M
47、WPb)Minimum number of cyclesAAS100 133 % 200 000ACBBS100 133 % 500 000BCCCS120 133 % and 120 %c500 000CCD DC 120 133 % 1 000 000aStandard or compact, e.g. CS is grade C and standard type.As shown in Table 4 and Table 8, standard types have larger outside diameters and larger bend radii and compact t
48、ypes have smaller outside diameters and smaller bend radii.bMaximum working pressure.c120 % of the MWP shall be used for classes 350, 420, 490 and 560 instead of 133 %.Each class includes one of each type or both as shown in Table 3.Table 3 Type and maximum working pressureClass 35 70 140 210 250 28
49、0 350 420 490 560MWPa(MPa) 3,5 7 14 21 25 28 35 42 49 56MWPa(bar) 35 70 140 210 250 280 350 420 490 560Grade TypeAAS X X X X X X X X N/A N/AAC X X X X X X X X N/A N/ABBS X X X X X X X X N/A N/ABC X X X X X X X X N/A N/ACCS N/A N/A N/A X X X X X N/A N/ACC N/A N/A N/A X X X X X X XD DC N/A N/A N/A X X X X X N/A N/ANOTE X = Applicable; N/A = Not applicable.aMaximum working pressure.5 Materials and construction5.1 HosesHoses shall consist of a hydraulic-f
