1、January 2017 English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.080.40!%_9“2605922www.din.deDI
2、N EN ISO 2286-1Rubber or plasticscoated fabrics Determination of roll characteristics Part 1: Methods for determination of length, width and net mass (ISO 22861:2016);English version EN ISO 22861:2016,English translation of DIN EN ISO 2286-1:2017-01Mit Kautschuk oder Kunststoff beschichtete Textilie
3、n Bestimmung der Rollencharakteristik Teil 1: Bestimmung der Lnge, Breite und Nettomasse (ISO 22861:2016);Englische Fassung EN ISO 22861:2016,Englische bersetzung von DIN EN ISO 2286-1:2017-01Supports textiles revtus de caoutchouc ou de plastique Dtermination des caractristiques des rouleaux Partie
4、1: Mthodes de dtermination de la longueur, de la largeur et de la masse nette (ISO 22861:2016);Version anglaise EN ISO 22861:2016,Traduction anglaise de DIN EN ISO 2286-1:2017-01SupersedesDIN EN ISO 22861:199807www.beuth.deDocument comprises 11 pagesDTranslation by DIN-Sprachendienst.In case of doub
5、t, the German-language original shall be considered authoritative.01.17 DIN EN ISO 2286-1:2017-01 2 A comma is used as the decimal marker. National foreword This document (EN ISO 2286-1:2016) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” in collaboration with Techni
6、cal Committee CEN/TC 248 “Textiles and textile products” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was DIN-Normenausschuss Kunststoffe (DIN Standards Committee Plastics), Working Committee NA 054-04-04 AA Kunststoff-Folien und kunststoffbeschichtete
7、Flchengebilde (Kunstleder); allgemeine Eigenschaften. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 2231:1989 DIN EN ISO 2231:1995-06 The DIN EN ISO 2286 series Rubber- or plastics-coated fabrics Determination of roll characteristics con
8、sists of the following parts: Part 1: Methods for determination of length, width and net mass Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate Part 3: Method for determination of thickness Amendments This standard differ
9、s from DIN EN ISO 2286-1:1998-07 as follows: a) ISO 2231:1989 has been added in Clause 2; b) the statement on atmospheric conditions and of relaxation of tension have been included in Subclause 5.1. c) in Subclause 5.2, the allowance of the final length in measurement has been changed; d) in Subclau
10、ses 5.3 and 5.4, the tolerance has been changed to more flexible; e) in Clause 6, item b) has been added. Previous editions DIN 53352: 1951-06, 1957-08, 1971-06, 1982-04 DIN 53353: 1951-06, 1971-06 DIN 53358: 1957-10, 1961-01, 1971-06 DIN EN 22286: 1993-11 DIN EN ISO 2286-1: 1998-07 DIN EN ISO 2286-
11、1:2017-01 3 National Annex NA (informative) Bibliography DIN EN ISO 2231:1995-06, Rubber- or plastics-coated fabrics Standard atmospheres for conditioning and testing (ISO 2231:1989) DIN EN ISO 2286-1:2017-01 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO
12、 2286-1 October 2016 ICS 59.080.40 Supersedes EN ISO 2286-1:1998English Version Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016) Supports textiles revtus de caoutchouc ou de plastique - Dter
13、mination des caractristiques des rouleaux - Partie 1: Mthodes de dtermination de la longueur, de la largeur et de la masse nette(ISO 2286-1:2016) Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Rollencharakteristik - Teil 1: Bestimmung der Lnge, Breite und Nettomasse(ISO 2286-1
14、:2016) This European Standard was approved by CEN on 1 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph
15、ical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibilit
16、y of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
17、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION
18、 EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2286-1:2016 EEuropean foreword .31 Scope . 52 Normative references 53 Terms a
19、nd definitions . 54 Apparatus . 55 Procedure. 65.1 General . 65.2 Determination of length 65.3 Determination of usable width . 65.4 Determination of net mass . 66 Test report . 6Contents PageDIN EN ISO 2286-1:2017-01 EN ISO 2286-1:2016 (E)2Foreword .4European foreword This document (EN ISO 2286-1:20
20、16) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publica
21、tion of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall
22、not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 2286-1:1998. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulg
23、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu
24、rkey and the United Kingdom. Endorsement notice The text of ISO 2286-1:2016 has been approved by CEN as EN ISO 2286-1:2016 without any modification. DIN EN ISO 2286-1:2017-01 EN ISO 2286-1:2016 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of nationa
25、l standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internation
26、al organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended f
27、or its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.o
28、rg/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be
29、 in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions
30、related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary informationThe committee responsible for this document is ISO/TC 45, Rubber and rubber
31、 products, Subcommittee SC 4, Products (other than hoses).This second edition cancels and replaces the first edition (ISO 2286-1:1998), which has been technically revised. The changes are as follows: in Clause 2, ISO 2231:1989 has been added; in 5.1, the statement on the atmospheric conditions and r
32、elaxation of tension has been incorporated; in 5.2, the allowance of the final length in measurement has been changed; in 5.3 and 5.4, the tolerance has been changed to more flexible; in Clause 6, item b) has been added.ISO 2286 consists of the following parts, under the general title Rubber or plas
33、ticscoated fabrics Determination of roll characteristics: Part 1: Methods for determination of length, width and net mass Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate Part 3: Method for determination of thicknessDIN
34、EN ISO 2286-1:2017-01 EN ISO 2286-1:2016 (E)4 WARNING Persons using this International Standard should be familiar with normal laboratory practice. This International Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the use
35、r to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.1 ScopeThis part of ISO 2286 specifies methods of determining the length, width and net mass of a roll of rubber- or plastics-coated fabrics.2 Normative referencesThe following doc
36、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 2231:1989, Rubber- or
37、 plastics-coated fabrics Standard atmospheres for conditioning and testing3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1usable widthwidth of a coated fabric, excluding the selvedge, which is consistent in its properties, uniformly finished, an
38、d free from unacceptable flaws4 Apparatus4.1 Measuring surface, comprising a flat horizontal surface not less than 5 m long and at least as wide as the roll to be examined. Both longitudinal edges of this surface shall be marked off in 1 m lengths. At least one of these lengths, preferably at the en
39、d of the surface, shall be marked at 1 cm intervals.4.2 Measuring scale, of a length greater than the width of the fabric to be measured, graduated in millimetres.4.3 Balance, accurate to the nearest 100 g.DIN EN ISO 2286-1:2017-01 EN ISO 2286-1:2016 (E)5 5 Procedure5.1 GeneralRecord the atmospheric
40、 temperature and the humidity in which measurement took place together with a statement as to whether the coated fabric was measured directly from the roll or after being allowed to relax tension free.When an environment to control the atmospheric temperature and the humidity is available, it is rec
41、ommended that coated fabrics are conditioned in an environment complying with the method of conditioning “1” in ISO 2231:1989 for a minimum of 16 h prior to measurement of length, width and net mass. It is also advisable when measuring length or width to unroll the fabric onto a flat surface and to
42、allow the fabric to come to equilibrium without tension for a minimum of 16 h.5.2 Determination of lengthProceed either as described in the following paragraph of this subclause, or use any other suitable mechanical, electromechanical or photoelectric equipment for measuring coated-fabric length. Th
43、e alternative means of measurement, however, can be unsuitable for extensible coated fabrics such as those having a knitted substrate.Trim the cut end of the roll so that it is at right angles to the longitudinal axis of the roll, confining the trimming to the minimum necessary to ensure perpendicul
44、arity. With the cut end of the roll coincident with the zero mark on the measuring surface (4.1), unroll the material along the surface in such a manner that no tension is introduced. On reaching the other end of the surface, mark the back of the roll in some suitable way at both edges so that the m
45、arks coincide with a particular division of length. Re-roll the length that has been measured. Lay out, free from tension, a further length of the unmeasured part of the roll, and measure from the edge marks, as before. Repeat this process until the end of the roll appears, trimming this as necessar
46、y until it is at right angles to the longitudinal axis of the roll, again confining the trimming to the minimum necessary to ensure perpendicularity. Measure the final length to the nearest 100 mm unless otherwise specified between the interested parties.In cases of dispute, this method shall be the
47、 referee method.5.3 Determination of usable widthWhile the coated fabric is unrolled and free of tension during the measurements described in 5.2, measure, using the measuring scale (4.2), and record, at intervals of 10 m, the usable width of the coated fabric to the nearest 5 mm unless otherwise sp
48、ecified between the interested parties, ensuring that all measurements of width are taken at right angles to the longitudinal axis of the roll.For rolls less than 20 m long, measure the width at three positions, i.e. near the two ends and in the middle.5.4 Determination of net massUse the balance (4.3) to determine the mass of the tube or former upon which the coated fabric was rolled and record the value in grams. Roll the coated fabric on the tube or former. Determine the gross mass of the roll of co
