1、October 2014Translation by DIN-Sprachendienst.English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 87.040!%;IG“2243836www.din.deDDIN EN ISO 3233-2Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Method using the determination of non-volatile-matter content inaccordance with ISO 3251 and determination of the dry film density oncoated test panels by the Ar
3、chimedes principle (ISO 3233-2:2014);English version EN ISO 3233-2:2014,English translation of DIN EN ISO 3233-2:2014-10Beschichtungsstoffe Bestimmung des Volumens nichtflchtiger Anteile Teil 2: Verfahren mit Bestimmung des Gehaltes an nichtflchtigen Anteilen nach ISO 3251und Bestimmung der Trockenf
4、ilmdichte beschichteter Probenplatten nach demArchimedes-Prinzip (ISO 3233-2:2014);Englische Fassung EN ISO 3233-2:2014,Englische bersetzung von DIN EN ISO 3233-2:2014-10Peintures et vernis Dtermination du pourcentage en volume de matire non volatile Partie 2: Mthode utilisant la teneur en matire no
5、n volatile dtermine conformment lISO 3251 et la masse volumique du feuil sec dtermine par le principe dArchimde surdes panneaux dessai revtus (ISO 3233-2:2014);Version anglaise EN ISO 3233-2:2014,Traduction anglaise de DIN EN ISO 3233-2:2014-10SupersedesDIN 53219:2009-08www.beuth.deIn case of doubt,
6、 the German-language original shall be considered authoritative.Document comprises 17 pages09.14 DIN EN ISO 3233-2:2014-10 2 A comma is used as the decimal marker. National foreword This document (EN ISO 3233-2:2014) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes”, Subcommi
7、ttee SC 9 “General test methods for paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Beschichtungsstoffe und Beschichtungen (DIN Standards
8、 Committee Coatings and Coating Materials), Working Committee NA 002-00-07 AA Allgemeine Prfverfahren fr Beschichtungsstoffe und Beschichtungen. DIN EN ISO 3233 consists of the following parts, under the general title Paints and varnishes Determination of the percentage volume of non-volatile matter
9、: Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by t
10、he Archimedes principle Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material The DIN Standards corresponding to the International Standards referred
11、 to in this document are as follows: ISO 1513 DIN EN ISO 1513 ISO 2808 DIN EN ISO 2808 ISO 2811-1 DIN EN ISO 2811-1 ISO 2811-2 DIN EN ISO 2811-2 ISO 2811-3 DIN EN ISO 2811-3 ISO 2811-4 DIN EN ISO 2811-4 ISO 3251 DIN EN ISO 3251 ISO 4618:2006 DIN EN ISO 4618:2007-03 ISO 15528 DIN EN ISO 15528 Amendme
12、nts This standard differs from DIN 53219:2009-08 as follows: a) the status of the standard has been changed to that of a European Standard; b) the round metal dish of 75 mm diameter has been deleted; c) the determination is now carried out in duplicate (instead of in triplicate); d) the theoretical
13、spreading rate has been changed to the practical spreading rate; e) the informative Annex A giving an overview of internationally standardized methods for determining non-volatile-matter content and the volume of non-volatile matter, as well as the derived practical and theoretical spreading rates,
14、has been added. Previous editions DIN 53219: 1976-01, 1992-08, 2005-08, 2009-08 DIN EN ISO 3233-2:2014-10 3 National Annex NA (informative) Bibliography DIN EN ISO 1513, Paints and varnishes Examination and preparation of test samples DIN EN ISO 2808, Paints and varnishes Determination of film thick
15、ness DIN EN ISO 2811-1, Paints and varnishes Determination of density Part 1: Pyknometer method DIN EN ISO 2811-2, Paints and varnishes Determination of density Part 2: Immersed body (plummet) method DIN EN ISO 2811-3, Paints and varnishes Determination of density Part 3: Oscillation method DIN EN I
16、SO 2811-4, Paints and varnishes Determination of density Part 4: Pressure cup method DIN EN ISO 3251, Paints, varnishes and plastics Determination of non-volatile-matter content DIN EN ISO 4618:2007-03, Paints and varnishes Terms and definitions DIN EN ISO 15528, Paints, varnishes and raw materials
17、for paints and varnishes Sampling DIN EN ISO 3233-2:2014-10 4 This page is intentionally blank EN ISO 3233-2 July 2014 ICS 87.040 English Version Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter conte
18、nt in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014) Peintures et vernis - Dtermination du pourcentage en volume de matire non volatile - Partie 2: Mthode utilisant la teneur en matire non volatile dtermine conformme
19、nt lISO 3251 et la masse volumique du feuil sec dtermine par le principe dArchimde sur des panneaux dessai revtus (ISO 3233-2:2014) Beschichtungsstoffe - Bestimmung des Volumensnichtflchtiger Anteile - Teil 2: Verfahren mit Bestimmungdes Gehaltes an nichtflchtigen Anteilen nach ISO 3251und Bestimmun
20、g der Trockenfilmdichte beschichteterProbenplatten nach dem Archimedes-Prinzip(ISO 3233-2:2014)This European Standard was approved by CEN on 17 April 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s
21、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,
22、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr
23、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
24、 United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 3233-2:2014 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES
25、 KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMContents Page Foreword . 3 1 Scope . 4 2 Normative references. 4 3 Terms and definitions 4 4 Principle 5 5 Apparatus 5 6 Sampling . 6 7 Procedure 6 7.1 Number of determinations and preparation 6 7.2 Determination of the practical dry-
26、film density 6 7.3 Determination of the density . 7 7.4 Determination of the non-volatile-matter content . 7 7.5 Determination of film thickness 7 8 Evaluation . 8 8.1 Calculation of the practical dry-film density . 8 8.2 Calculation of the non-volatile matter by volume using the practical dry-film
27、density 8 8.3 Determination of the practical spreading rate 8 9 Precision . 9 9.1 Repeatability . 9 9.2 Reproducibility . 9 10 Test report . 9 Annex A (informative) Overview of existing methods for determination of non-volatile matter content and volume of non-volatile matter . 11 Bibliography 13 2D
28、IN EN ISO 3233-2:2014-10 EN ISO 3233-2:2014 (E) ForewordThis document (EN ISO 3233-2:2014) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Stan
29、dard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of
30、this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European S
31、tandard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
32、 Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 3233-2:2014 has been approved by CEN as EN ISO 3233-2:2014 without any modification. 3DIN EN ISO 3233-2:2014-10EN ISO 3233-2:2014 (E)1 ScopeThis part of ISO 3233 specifies a method for determining the non-
33、volatile matter by volume (NVv) of coating materials by determining the practical dry-film density. This method determines the volume percentage of non-volatile matter in paints, varnishes and related products by measuring the density of a dry coating for any specified temperature range and period o
34、f drying or curing.Using the non-volatile matter by volume results obtained in accordance with this part of ISO 3233, it is possible to calculate the practical spreading rate of coating materials.This method specifies an additional shape of plate to those described in ISO 3233-1 and is suitable for
35、all products which can be applied by dipping.This part of ISO 3233 is not applicable to coating materials which exceed the critical pigment volume concentration (CPVC).2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensabl
36、e for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1513, Paints and varnishes Examination and preparation of test samplesISO 2808, Paints and varnishes Determination
37、 of film thicknessISO 2811 (all parts), Paints and varnishes Determination of densityISO 3251, Paints, varnishes and plastics Determination of non-volatile-matter contentISO 15528, Paints, varnishes and raw materials for paints and varnishes Sampling3 Terms and definitionsFor the purposes of this do
38、cument, the following terms and definitions apply.3.1non-volatile matterNVresidue by mass obtained by evaporation under specified conditionsSOURCE: ISO 4618:2006, 2.1614DIN EN ISO 3233-2:2014-10 EN ISO 3233-2:2014 (E) 3.2non-volatile matter by volumeNVVpercentage residue by volume obtained by evapor
39、ation under specified conditions3.3spreading ratessurface area that can be covered by a given quantity of coating material to give a dried film of requisite thicknessNote 1 to entry: It is expressed in m2/l or m2/kg.3.4practical spreading ratespspreading rate which is obtained in practice on the par
40、ticular substrate being coated3.5practical dry-film densityppractically determined density of a dried and cured coating4 PrincipleThe non-volatile matter by volume is calculated from the quotient of the density of the coating material and the dry film, with the dry-film density being determined prac
41、tically.5 ApparatusStandard laboratory apparatus together with the following:5.1 Metal plate, (40 1) mm (85 1) mm, with a small hole 2 mm to 3 mm from the edge. A plate with a tip on one of the shorter edges is easier to immerse in the coating material (see Figure 1).The material of the plate shall
42、be suitable and adapted to the coating material under test. In addition the material of the plate shall not change its volume during contact with the coating material under test. The thickness of the plate is about 0,7 mm or it shall be agreed between the interested parties.Smaller plates may be use
43、d subject to agreement between the interested parties, provided that the coated surface area is at least 5 600 mm2.Dimensions in millimetresFigure 1 Suitable plate for immersion5DIN EN ISO 3233-2:2014-10EN ISO 3233-2:2014 (E)5.2 Hook, made of stainless material or synthetic thread, for attaching the
44、 plate to the balance during weighing operations. The diameter of the wire shall not exceed 0,30 mm because of surface tension effects.5.3 Beaker, of a size convenient for immersing the plate with a clearance of at least 10 mm and which can be accommodated in the balance case.5.4 Analytical balance,
45、 accurate to 0,1 mg. A single-pan balance is most convenient, and a useful modification is to replace the balance pan by a standard counterweight attachment.5.5 Support, for holding the beaker under the balance stirrup without jamming the pan damper, if a counterweight as recommended in 5.4 is not a
46、vailable.5.6 Immersion liquid of suitable density, in which the plate is immersed.NOTE Water is a suitable immersion liquid for most coating materials. Other organic liquids are also suitable provided they do not attack the coating.5.7 Desiccator containing a suitable desiccant.5.8 Air oven, capable
47、 of maintaining the specified or agreed test temperature to 2,0C (for temperatures up to 150C) or 3,5C (for temperatures above 150C and up to 200C). An air oven with forced ventilation shall be used.WARNING To protect against explosions and fire, careful handling of products containing flammable vol
48、atile materials is essential.Drying in a vacuum can be beneficial for certain applications. In such cases the conditions shall be agreed. Air ovens of the same type shall be used by all parties for referee tests.6 SamplingTake a representative sample of the coating material to be tested, in accordan
49、ce with ISO 15528.Examine and prepare the samples for testing in accordance with ISO 1513.7 Procedure7.1 Number of determinations and preparationCarry out the determination in duplicate.Degrease and clean the plate (5.1). Dry the plate and hook at the specified temperature for 10 min, and cool in the desiccator.7.2 Determination of the practical dry-film density7.2.1 Determination of the mas
