1、ICS 01.040.47; 47.020.20Ships and marine technologyPropulsion plants for shipsPart 1: Vocabulary for geometry of propellers(ISO 3715-1 : 2002)English version of DIN EN ISO 3715-1Schiffe und Meerestechnik Vortriebsanlagen fr Schiffe Teil 1: Begriffe fr Propellergeometrie(ISO 3715-1 : 2002)European St
2、andard EN ISO 3715-1 : 2004 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 300 Seagoing vesselsand marine technology to adopt, without alteration, International Standard ISO 3715-1
3、 as a EuropeanStandard.The responsible German body involved in its preparation was the Normenausschuss Schiffs- und Meeres-technik (Marine Technology Standards Committee), Technical Committee Leistungserzeugung, -bertragungund Vortrieb.DIN EN ISO 3715-2 is the standard corresponding to International
4、 Standard ISO 3715-2 referred to in theNormative reference clause of the EN.AmendmentsDIN 85646-1, May 1992 edition, has been superseded by the specifications of EN ISO 3715-1, which isidentical to ISO 3715-1.Previous editionsVG 85646-100: 1983-07; DIN 85646-1: 1992-05.National Annex NAStandard refe
5、rred to(and not included in Normative reference and Annex ZA)DIN EN ISO 3715-2 Ships and marine technology Propulsion plants for ships Part 2: Vocabulary forcontrollable-pitch propeller plants (ISO 3715-2 : 2001)DEUTSCHE NORM May 2004DIN EN ISO 3715-1 No part of this standard may be reproduced witho
6、ut the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Normenausschuss Bauwesen (NABau) im DINEnglish price group 12www.din.dewww.beuth.de08.04 9571776Continued overleaf.Docu
7、ment comprises 19 pages.Supersedes DIN 85646-1,May 1992 edition.English versionICS 01.040.47; 47.020.20Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungShips and marine technologyPropulsion plants
8、for shipsPart 1: Vocabulary for geometry of propellers(ISO 3715-1 : 2002) 2004. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 3715-1 : 2004 ENavires et technologie maritime Ins-tallations de propulsion des navires Partie 1: Ter
9、mes et dfinitions relatifs la gomtrie de lhlice(ISO 3715-1 : 2002)Schiffe und Meerestechnik Vor-triebsanlagen fr Schiffe Teil 1: Be-griffe fr Propellergeometrie(ISO 3715-1 : 2002)This European Standard was approved by CEN on 2004-01-02.CEN members are bound to comply with the CEN/CENELEC Internal Re
10、gulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The Europe
11、an Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national sta
12、ndards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN
13、ISO 3715-1February 2004Page 2EN ISO 3715-1 : 2004ForewordInternational StandardISO 3715-1 : 2002 Ships and marine technology Propulsion plants for ships Part 1: Vocabulary for geom-etry of propellers,which was prepared by ISO/TC 8 Ships and marine technology of the International Organization for Sta
14、ndardi-zation, has been adopted by Technical Committee CEN/TC 300 Seagoing vessels and marine technology, theSecretariat of which is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsemen
15、t, and conflicting national standards withdrawn, by August 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national Standards Organizations of the fol-lowing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark,
16、 Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 3715-1 : 20
17、02 was approved by CEN as a European Standardwithout any modification.NOTE: Normative references to international publications are listed in Annex ZA (normative.)Page 3EN ISO 3715-1 : 2004Page 4EN ISO 3715-1 : 2004Page 5EN ISO 3715-1 : 2004Page 6EN ISO 3715-1 : 2004Page 7EN ISO 3715-1 : 2004Page 8EN ISO 3715-1 : 2004Page 9EN ISO 3715-1 : 2004Page 10EN ISO 3715-1 : 2004Page 11EN ISO 3715-1 : 2004Page 12EN ISO 3715-1 : 2004Page 13EN ISO 3715-1 : 2004Page 14EN ISO 3715-1 : 2004Page 15EN ISO 3715-1 : 2004Page 16EN ISO 3715-1 : 2004Page 17EN ISO 3715-1 : 2004Page 18EN ISO 3715-1 : 2004
