1、May 2011 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 65
2、.060.20!$pho“1776976www.din.deDDIN EN ISO 4254-5Agricultural machinery Safety Part 5: Power-driven soil-working machines (ISO 4254-5:2008)(includes Corrigendum AC:2011)English translation of DIN EN ISO 4254-5:2011-05Landmaschinen Sicherheit Teil 5: Kraftbetriebene Bodenbearbeitungsgerte (ISO 4254-5:
3、2008)(enthlt Berichtigung AC:2011)Englische bersetzung von DIN EN ISO 4254-5:2011-05Matriel agricole Scurit Partie 5: Machines de travail du sol outils anims (ISO 4254-5:2008)(Corrigendum AC:2011 inclus)Traduction anglaise de DIN EN ISO 4254-5:2011-05SupersedesDIN EN ISO 4254-5:2010-06www.beuth.deDo
4、cument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2305.11 DIN EN ISO 4254-5:2011-05 2 Start of application The start of application of this standard is 1 June 2010. National foreword This standard includes safety requirements. This standard has be
5、en prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” (Secretariat: AFNOR, France) in collaboration with Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry”. The responsible German body involved in its preparation was the
6、Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-16-02 AA Bodenbearbeitung, Saat, Pflanzenpflege und Pflanzenschutz of Section Landtechnik. Representatives of interested parties contributed to this standard. This standard contains specifications mee
7、ting the essential requirements set out in Annex I of the EU Machinery Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that Directive
8、. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to i
9、n Clause 2 and in the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. For the International Standards which have not been published as DIN ISO Standards with the same number, there are no national standards available. Amendm
10、ents This standard differs from DIN EN 708:2001-01 as follows: a) addition of a noise clause (4.2). b) revision of the requirements related to the protection against inadvertent contact with power-driven tools (4.3). c) addition of Annex ZB: 1) deletion of EN 1553:1999 “Agricultural machinery Agricu
11、ltural self-propelled, mounted, semi-mounted and trailed machines Common safety requirements” and replacement with EN ISO 4254-1: “Agricultural machinery Safety Part 1: General requirements” (ISO 4254-1:2008); 2) deletion of the requirements related to the guarding of moving parts for power transmis
12、sion dealt with in EN 15811: “Agricultural machinery Guards for moving parts of power transmission Guard opening with tool” (ISO/TS 28923:2007); 3) deletion of the requirements related to handling and transport dealt with in EN ISO 4254-1: “Agricultural machinery Safety Part 1: General requirements”
13、 (ISO 4254-1:2008); DIN EN ISO 4254-5:2011-05 3 d) inclusion of Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC”. Compared with DIN EN ISO 4254-5:2010-06, the following corrections have been made: e) the European Corrigend
14、um EN ISO 4254-5:2009/AC:2011 has been incorporated; f) Table A.1 has been corrected. Previous editions DIN 11001-6: 1980-08 DIN EN 708: 1996-05, 2001-01 DIN EN ISO 4254-5: 2010-06 DIN EN ISO 4254-5:2011-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4
15、254-5 September 2009 + AC March 2011 ICS 65.060.01 Supersedes EN 708:1996English version Agricultural machinery Safety Part 5: Power-driven soil-working machines (ISO 4254-5:2008) Matriel agricole Scurit Partie 5: Machines de travail du sol outils anims (ISO 4254-5:2008) Landmaschinen Sicherheit Tei
16、l 5: Kraftbetriebene Bodenbearbeitungsgerte (ISO 4254-5:2008) EN ISO 4254-5:2009 was approved by CEN on 2009-09-14 and Corrigendum AC:2011 on 2011-03-16. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta
17、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A ver
18、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republ
19、ic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE N
20、ORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 4254-5:2009 + AC:2011 EContents Page Foreword3 DIN EN ISO 4254-5:2011-05 EN IS
21、O 4254-5:2009 + AC:2011 (E) 2 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Safety requirements and/or measures 6 4.1 General6 4.2 Noise reduction at the design stage6 4.3 Protection against inadvertent contact with power-driven tools .6 4.4 Adjustment of working de
22、pth 11 5 Verification of safety requirements or protective measures 13 6 Information for use . 13 6.1 Operators manual 13 6.2 Safety and instructional signs. 13 Annex A (informative) List of significant hazards. 14 Annex B (informative) Examples of power-driven soil working machines 18 Annex ZA (inf
23、ormative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 19 Foreword This document (ISO 4254-5:2008 + A1:2011) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry”, Subcommittee SC 3, “Safety
24、 and comfort” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 4254-5:2009 by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status
25、of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of
26、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Direct
27、ive 2006/42/EC. It is intended to be used together with EN ISO 4254-1:2009, Agricultural machinery Safety Part 1: General requirements (ISO 4254-1:2008) and EN 15811:2009, Agricultural machinery Guards for moving parts of power transmission Guard opening with tool (ISO/TS 28923:2007 modified). This
28、document supersedes EN 708:1996. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This second edition cancels and replaces the first edition (EN 708:1996 and EN 708/A1:2000), which has been technically revised. The following major changes w
29、ere introduced: deletion of the reference to EN 1553:1999, Agricultural machinery Agricultural self-propelled, mounted, semi-mounted and trailed machines Common safety requirements, and replacement with EN ISO 4254-1:2009, Agricultural machinery Safety Part 1: General requirements (ISO 4254-1:2008);
30、 deletion of the requirements related to the guarding of moving parts for power transmission dealt with in EN 15811:2009, Agricultural machinery Guards for moving parts of power transmission Guard opening with tool (ISO/TS 28923:2007 modified); deletion of the requirements related to handling and tr
31、ansport dealt with in EN ISO 4254-1:2009, Agricultural machinery Safety Part 1: General requirements (ISO 4254-1:2008); addition of a noise clause (4.2); revision of the requirements related to the protection against inadvertent contact with power-driven tools (4.3); inclusion of Annex ZB. According
32、 to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
33、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 4254-5:2008 has been approved by CEN as a EN ISO 4254-5:2009 without any modification. DIN EN ISO 4254-5:2011-05
34、 EN ISO 4254-5:2009 + AC:2011 (E) 3 Introduction The structure of safety standards in the field of machinery is as follows. a) Type-A standards (basis standards) give basic concepts, principles for design, and general aspects that can be applied to machinery. b) Type-B standards (generic safety stan
35、dards) deal with one or more safety aspect(s) or one or more type(s) of safeguards that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise); type-B2 standards on safeguards (e.g. two-hands controls, interloc
36、king devices, pressure sensitive devices, guards); c) Type-C standards (machinery safety standards) deal with detailed safety requirements for a particular machine or group of machines. This part of ISO 4254 is a type-C standard as stated in ISO 12100-1. When provisions of this type-C standard are d
37、ifferent from those which are stated in type-A or type-B standards, the provisions of this type-C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type-C standard. The machinery concerned and the ex
38、tent to which hazards, hazardous situations and events are covered are indicated in the scope of this part of ISO 4254. These hazards are specific to power-driven soil-working machines. Significant hazards that are common to all the agricultural machines (self-propelled, mounted, semi-mounted and tr
39、ailed) are dealt with in ISO 4254-1. DIN EN ISO 4254-5:2011-05 EN ISO 4254-5:2009 + AC:2011 (E) 4 1 Scope This part of ISO 4254, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed
40、 power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This part of ISO 4254 deals with significant hazards (as listed in Annex A), hazardous situations and ev
41、ents relevant to power-driven soil-working machines used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This part of ISO 4254 is not applicable to: spading machines; machines fitted with a retractable device making them capable of working between two successive pla
42、nts in the same row. This part of ISO 4254 is not applicable to environmental hazards or electromagnetic compatibility. It is not applicable to hazards related to moving parts for power transmission, except for strength requirements for guards and barriers, nor to maintenance or repairs carried out
43、by professional service personnel. NOTE 1 Specific requirements related to road traffic regulations are not taken into account in this part of ISO 4254. NOTE 2 Vibrations are not regarded as a significant hazard in the case of mounted, semi-mounted or trailed machines. This part of ISO 4254 is not a
44、pplicable to power-driven soil-working machines which are manufactured before the date of its publication. When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254-1
45、. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4254-1:2008, Agricul
46、tural machinery Safety Part 1: General requirements ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology DIN EN ISO 4254-5:2011-05 EN ISO 4254-5:2009 + AC:2011 (E) 5 3 Terms and definitions For the purposes of this document, the t
47、erms and definitions given in ISO 12100-1 and ISO 4254-1 and the following apply. 3.1 power-driven soil-working machine machine with powered tools designed for modifying soil structure or profile and/or for incorporating plant and crop residues or animal manure during tillage NOTE See Annex B for ex
48、amples of such machines. 3.2 attachment equipment which can be fitted to a power-driven soil-working machine and which allows the function of the machine to be modified 3.2.1 attachment preventing access attachment which restricts access onto the top of the power-driven soil-working machine and its
49、driven tools at the rear EXAMPLE Seed drills. 3.2.2 attachment not preventing access equipment which allows access onto the top of the power-driven soil-working machine EXAMPLE Frames, rollers or harrows. 4 Safety requirements and/or measures 4.1 General Machinery shall comply with the safety requirements and/or protective measures of this clause. Unless otherwise specified in this part of ISO 4254, the machine shall comply with the requirements of ISO 4254-1. The compliance
