1、ICS 85.040Pulps Preparation of laboratory sheets for physical testingPart 2: Rapid-Kthen method(ISO 5269-2 : 2004)English version of DIN EN ISO 5269-2Faserstoffe Laborblattbildung fr physikalische Prfungen Teil 2: Rapid-Kthen-Verfahren(ISO 5269-2 : 2004)A comma is used as the decimal marker.National
2、 forewordThis standard has been published in accordance with a decision taken by CEN/TC 172 to adopt, withoutalteration, International Standard ISO 5269-2 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Materialprfung(Materials Testing Standards
3、 Committee), Technical Committee Physikalisch-technologische Prfverfahrenfr Papier und Pappe.The DIN Standards corresponding to International Standards referred to in clause 2 of the EN are as follows:ISO Standard DIN StandardISO 187 DIN EN 20187ISO 4119 DIN EN ISO 4119ISO 5263-1 DIN EN ISO 5263-1IS
4、O 5263-2 DIN EN ISO 5263-2ISO 5263-3 DIN EN ISO 5263-3ISO 5269-1 DIN EN ISO 5269-1AmendmentsThis standard differs from the October 2000 edition in that it has been editorially revised and references havebeen updated.Previous editionsDIN 54359-1: 1981-02; DIN EN ISO 5269-2: 2000-10.DEUTSCHE NORM Marc
5、h 2005DIN EN ISO 5269-2 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Normenausschuss Bauwesen (NABau) im DINEnglish
6、price group 9www.din.dewww.beuth.de06.05 9632230Continued overleaf.Document comprises 11 pages.SupersedesOctober 2000 edition.National Annex NAStandards referred to(and not included in Normative references and Bibliography)DIN EN 20187 Paper, board and pulps Standard atmosphere for conditioning and
7、testing and proce-dure for monitoring the atmosphere and conditioning of samplesDIN EN ISO 4119 Determination of stock concentration of pulps (ISO 4119 : 1995)DIN EN ISO 5263-1 Pulps Laboratory wet disintegration Part 1: Disintegration of chemical pulps(ISO 5263-1 : 2004)DIN EN ISO 5263-2 Laboratory
8、 wet disintegration Part 2: Disintegration of mechanical pulps at 20 C(ISO 5263-2 : 2004)DIN EN ISO 5263-3 Pulps Laboratory wet disintegration Part 1: Disintegration of mechanical pulps at 85 C(ISO 5263-3 : 2004)DIN EN ISO 5269-1 Pulps Preparation of laboratory sheets for physical testing Part 1: Co
9、nventional sheet-former method (ISO 5269-1 : 1998)Page 2DIN EN ISO 5269-2 : 2005-03English versionICS 85.040 Supersedes EN ISO 5269-2 : 2000.Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPulps P
10、reparation of laboratory sheets for physicaltestingPart 2: Rapid-Kthen method(ISO 5269-2 : 2004) 2004. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 5269-2 : 2004 EPtes Prparation des feuilles delaboratoire pour essais physique
11、s Partie 2: Mthode Rapid-Kthen(ISO 5269-2 : 2004)Faserstoffe Laborblattbildung frphysikalische Prfungen Teil 2:Rapid-Kthen-Verfahren(ISO 5269-2 : 2004)This European Standard was approved by CEN on 2004-12-06.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the
12、 conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three of
13、ficial versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belg
14、ium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.December 2004EN ISO 5269-2Page 2E
15、N ISO 5269-2 : 2004223334778888999ForewordInternational StandardISO 5269-2 : 2004 Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Kthenmethod,which was prepared by ISO/TC 6 Paper, board and pulps of the International Organization for Standardization,has been adopted by Tech
16、nical Committee CEN/TC 172 Pulp, paper and board, the Secretariat of which isheld by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by June
17、2005 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland
18、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 5269-2 : 2004 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 5269-2 : 2004Page 4EN ISO 5269-2 : 2004Page 5EN ISO 5269-2 : 2004Page 6EN ISO 5269-2 : 2004Page 7EN ISO 5269-2 : 2004Page 8EN ISO 5269-2 : 2004Page 9EN ISO 5269-2 : 2004
