1、October 2017 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 65.060.70!%new“2756684www.din.de
2、DIN EN ISO 5395-2Garden equipment Safety requirements for combustionenginepowered lawnmowers Part 2: Pedestriancontrolled lawnmowers (ISO 53952:2013 + AMD 1:2016 + AMD 2:2017);English version EN ISO 53952:2013 + A1:2016 + A2:2017,English translation of DIN EN ISO 5395-2:2017-10Gartengerte Sicherheit
3、sanforderungen fr verbrennungsmotorisch angetriebene Rasenmher Teil 2: Handgefhrte Rasenmher (ISO 53952:2013 + AMD 1:2016 + AMD 2:2017);Englische Fassung EN ISO 53952:2013 + A1:2016 + A2:2017,Englische bersetzung von DIN EN ISO 5395-2:2017-10Matriel de jardinage Exigences de scurit pour les tondeuse
4、s gazon moteur combustion interne Partie 2: Tondeuses gazon conducteur pied (ISO 53952:2013 + AMD 1:2016 + AMD 2:2017);Version anglaise EN ISO 53952:2013 + A1:2016 + A2:2017,Traduction anglaise de DIN EN ISO 5395-2:2017-10SupersedesDIN EN ISO 53952:201705www.beuth.deDTranslation by DIN-Sprachendiens
5、t.In case of doubt, the German-language original shall be considered authoritative.Document comprises 45 pages 10.17DIN EN ISO 5395-2:2017-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2017-10-01. National foreword This standard include
6、s safety requirements. This document (EN ISO 5395-2:2013 + A1:2016 + A2:2017) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry”, SC 13 “Powered lawn and garden equipment” (Secretariat: ANSI, USA), in collaboration with Working Group WG 7 “Garden
7、 equipment” of Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was DIN-Normenausschuss Eisen-, Blech- und Metallwaren (DIN Standards Committee Hardware, Tinware and Metal Produc
8、ts), Working Committee NA 020-00-11-01 UA “Lawnmowers”. This standard contains specifications giving detail to the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned with
9、in the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance
10、with the requirements of the Machinery Directive (“presumption of conformity”). The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and #$. DIN EN ISO 5395 consists of the following parts, under the general title Garden equipment Safety requirements fo
11、r combustion-engine-powered lawnmowers: Part 1: Terminology and common tests Part 2: Pedestrian-controlled lawnmowers Part 3: Ride-on lawnmowers with seated operator The DIN Standards corresponding to the International Standards referred to in Clause 2 of this standard are as follows: IEC 61032 DIN
12、EN 61032 ISO 12100 DIN EN ISO 12100 ISO 13857 DIN EN ISO 13857 ISO 14982 DIN EN ISO 14982 DIN EN ISO 5395-2:2017-10 3 Amendments This standard differs from DIN EN ISO 5395-2:2017-05 as follows: a) requirements for cutting-means enclosure have been supplemented; b) requirements for the foot probe acc
13、ording to EN 836 have been re-established; c) the standard has been editorially revised; d) Annex ZA has been completely replaced. Previous editions DIN 1856-1: 1972-11, 1987-01, 1979-02, 1984-07 DIN 1856-2: 1972-11, 1978-01, 1979-02, 1984-07 DIN 1857-1: 1977-07, 1980-10 DIN 1857-2: 1977-07, 1980-10
14、 DIN 1858-1: 1977-07, 1980-10 DIN 1858-2: 1977-07, 1980-10 DIN EN 836: 1997-09 DIN EN 836/A1: 1998-06 DIN EN 836/A2: 2001-10 DIN EN 836/A3: 2004-05 DIN EN 836 Corrigendum 1: 2006-05 DIN EN 836: 2012-07 DIN EN ISO 5395-2: 2014-03, 2017-04, 2017-05 DIN EN ISO 5395-2:2017-10 4 National Annex NA (inform
15、ative) Bibliography DIN EN 60335-1 (VDE 0700-1), Household and similar electrical appliances Safety Part 1: General requirements DIN EN 60335-2-77 (VDE 0700-77), Safety of household and similar appliances Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered l
16、awn mowers DIN EN 61032, Protection of persons and equipment by enclosures Probes for verification DIN EN ISO 12100, Safety of machinery General principles for design Risk assessment and risk reduction DIN EN ISO 13849-1:2016-06, Safety of machinery Safety-related parts of control systems Part 1: Ge
17、neral principles for design (ISO 13849-1:2015) DIN EN ISO 13857, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs DIN EN ISO 14982, Agricultural and forestry machines Electromagnetic compatibility Test methods and acceptance criteria EUROPEAN STANDA
18、RD NORME EUROPENNE EUROPISCHE NORM EN ISO 5395-2 September 2013 +A1 +A2 December 2016 May 2017 ICS 65.060.70 Supersedes EN 836:1997+A4:2011 English Version Garden equipment Safety requirements for combustion-engine-powered lawnmowers Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013 + Amd 1:
19、2016 + Amd 2:2017) Matriel de jardinage Exigences de scurit pour les tondeuses gazon moteur combustion interne Partie 2: Tondeuses gazon conducteur pied (ISO 5395-2:2013 + Amd 1:2016 + Amd 2:2017) Gartengerte Sicherheitsanforderungen fr verbrennungsmotorisch angetriebene Rasenmher Teil 2: Handgefhrt
20、e Rasenmher (ISO 5395-2:2013 + Amd 1:2016 + Amd 2:2017) This European Standard was approved by CEN on 19 July 2013. Amendment A1 was approved by CEN on 19 September 2016. Amendment A2 was approved by CEN on 8 March 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
21、 stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This amen
22、dment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the na
23、tional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S
24、lovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any m
25、eans reserved worldwide for CEN national Members. Ref. No. EN ISO 5395-2:2013 + A1:2016 + A2:2017 E EN ISO 5395-2:2013 + A1:2016 + A2:2017 (E) Contents Page 2 European foreword . 3 !European foreword to Amendment 1“ . 4 #European foreword to Amendment 2$ . 5 Introduction 6 1 Scope 7 2 Normative refe
26、rences 7 3 Terms and definitions . 8 4 Requirements for pedestrian-controlled lawnmowers 8 4.1 General 8 4.2 Controls . 8 4.3 Operator presence control (OPC) . 11 4.4 Handle 12 4.5 Guards 14 4.6 Brakes. 15 4.7 Transport position of the cutting-means assembly . 16 4.8 Separate fan for grass collectio
27、n 17 4.9 Hot surfaces 17 4.10 Exhaust fumes . 18 4.11 Pressurized hoses of hydraulic systems 18 4.12 Liquid spillage . 18 4.13 Electrical system . 18 4.14 Electromagnetic immunity . 19 4.15 Noise . 19 4.16 Vibration . 20 4.17 Additional requirements for a lawnmower with a sulky with a seat 20 5 Part
28、icular requirements for pedestrian-controlled rotary lawnmowers . 22 5.1 Stopping time of the cutting means . 22 5.2 Impact of the cutting means . 23 5.3 Cutting-means enclosure . 23 5.4 Structural integrity 28 5.5 Thrown objects . 29 5.6 Grass catcher 29 6 Particular requirements for pedestrian-con
29、trolled cylinder lawnmowers . 29 6.1 Throw line . 29 6.2 Cutting-means enclosure . 30 6.3 Stopping time of the cutting means . 32 7 Information for use . 33 7.1 Instruction handbook . 33 7.2 Markings and warnings . 36 Annex A (informative) List of significant hazards . 38 #Annex ZA (informative) Rel
30、ationship between this European Standard and the essential requirements of EU Directive 2006/42/EC amended by Directive 2009/127/EC aimed to be covered$ 40 Bibliography . 41 DIN EN ISO 5395-2:2017-10 EN ISO 5395-2:2013 + A1:2016 + A2:2017 (E) European foreword This document (EN ISO 5395-2:2013) has
31、been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status
32、of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by September 2014. Attention is drawn to the possibility that some of the elements of this document may be the subjec
33、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 836:1997+A4:2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and suppo
34、rts essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea
35、n Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven
36、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 5395-2:2013 has been approved by CEN as EN ISO 5395-2:2013 without any modification. 3 DIN EN ISO 5395-2:2017-10 EN ISO 5395-2:2013 + A1:2016 + A2:2017 (E) ! European foreword to Amendment 1 This docume
37、nt (EN ISO 5395-2:2013/A1:2016) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This Amendmen
38、t to the European Standard EN ISO 5395-2:2013 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possib
39、ility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade As
40、sociation, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound
41、 to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
42、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 5395-2:2013/Amd 1:2016 has been approved by CEN as EN ISO 5395-2:2013/A1:2016 without any modification.“ 4 DIN EN ISO 5395-2:2017-10 EN ISO 5395-2:2013 + A1:2016 + A2:2017 (E)
43、# European foreword to Amendment 2 This document (EN ISO 5395-2:2013/A2:2017) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secret
44、ariat of which is held by AFNOR. This Amendment to the European Standard EN ISO 5395-2:2013 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at the lat
45、est by November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by
46、the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standa
47、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
48、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 5395-2:2013/Amd 2:2017 has been approved by CEN as EN ISO 5395-2:2013/A2:2017 without any modification$ 5 DIN EN ISO 5395-
49、2:2017-10 IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document.When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have
