1、ICS 83.080.20PlasticsAcrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materialsPart 2: Preparation of test specimens and determination of properties(ISO 6402-2 : 2003)Engli
2、sh version of DIN EN ISO 6402-2Kunststoffe Acrylnitril-Styrol-Acrylat (ASA)-, Acrylnitril-(Ethylen-Propylen-Dien)-Styrol (AEPDS)- undAcrylnitril-(Chloriertes Polyethylen)-Styrol (ACS)-Formmassen Teil 2: Herstellung von Probekrpern undBestimmung von Eigenschaften (ISO 6402-2 : 2003)European Standard
3、EN ISO 6402-2 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, withoutalteration, International Standard ISO 6402-2 as a European Standard.The responsible German
4、 body involved in its preparation was the Normenausschuss Kunststoffe (PlasticsStandards Committee), Technical Committee Polystyrol-Formmassen.The DIN Standards corresponding to the IEC Publications and International Standards referred to inclause 3 of the EN are as follows:IEC Publication/ISO Stand
5、ard DIN StandardIEC 60093 DIN IEC 60093IEC 60112 DIN IEC 60112IEC 60243-1 DIN EN 60243-1ISO 62 DIN EN ISO 62ISO 75-2 DIN EN ISO 75-2ISO 178 DIN EN ISO 178ISO 179 DIN EN ISO 179ISO 180 DIN EN ISO 180ISO 293 DIN 16770-1ISO 294-1 DIN EN ISO 294-1ISO 306 DIN EN ISO 306ISO 527-2 DIN EN ISO 527-2ISO 527-4
6、 DIN EN ISO 527-4ISO 899-1 DIN EN ISO 899-1ISO 1133 DIN EN ISO 1133ISO 1183 DIN 53479ISO 1656 DIN 53625ISO 2818 DIN EN ISO 2818DEUTSCHE NORM May 2004DIN EN ISO 6402-2 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verla
7、g GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).SupersedesOctober 1999 edition.Normenausschuss Bauwesen (NABau) im DINEnglish price group 10www.din.dewww.beuth.de09.04 9573531Continued overleaf.Continued overleaf.Document comprises 11 pages.IEC Publica
8、tion/ISO Standard DIN StandardISO 3167 DIN EN ISO 3167ISO 4589 DIN EN ISO 4589-1 to DIN EN ISO 4589-3ISO 6402-1 DIN EN ISO 6402-1ISO 8256 DIN EN ISO 8256ISO 10350 DIN EN ISO 10350ISO 11357-2 DIN 53765AmendmentsThis standard differs from the October 1999 edition in that it has been editorially revise
9、d and references havebeen updated.Previous editionDIN 16777-2: 1981-06, 1988-12; DIN EN ISO 6402-2: 1999-10.National Annex NAStandards referred to(and not included in Normative references)DIN 16770-1 Preparation of specimens of thermoplastic moulding materials by compression mouldingDIN 53479 Determ
10、ination of density of plastics and elastomersDIN 53625 Testing of rubber and elastomers Determination of total nitrogen content by theKjeldahl methodDIN 53765 Thermal analysis of plastics and elastomers by the DSC methodDIN EN 60243-1 Methods of test for electric strength of solid insulating materia
11、ls Part 1: Tests atpower frequencies (IEC 60243-1 : 1998)DIN EN ISO 62 Plastics Determination of water absorption (ISO 62 : 1999)DIN EN ISO 75-2 Determination of temperature of deflection of plastics under load Part 2: Plastics andebonite (ISO 75-2 : 1993)DIN EN ISO 178 Plastics Determination of fle
12、xural properties (ISO 178 : 1993)DIN EN ISO 179 Plastics Determination of Charpy impact strength (ISO 179 : 1993)DIN EN ISO 180 Plastics Determination of Izod impact strength (ISO 180 : 1993)DIN EN ISO 294-1 Plastics Injection moulding of test specimens of thermoplastic materials Part 1: Generalprin
13、ciples, and moulding of multipurpose and bar test specimens (ISO 294-1 : 1996)DIN EN ISO 306 Thermoplastic materials Determination of Vicat softening temperature (VST)(ISO 306 : 1994)DIN EN ISO 527-2 Plastics Determination of tensile properties Part 2: Test conditions for moulding andextrusion plast
14、ics (ISO 527-2 : 1993 + Corr 1 : 1994)DIN EN ISO 527-4 Plastics Determination of tensile properties Part 4: Test conditions for isotropic andorthotropic fibre-reinforced plastic composites (ISO 527-4 : 1997)DIN EN ISO 899-1 Plastics Determination of creep behaviour Part 1: Tensile creep (ISO 899-1 :
15、 2003)DIN EN ISO 1133 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flowrate (MVR) of thermoplastics (ISO 1133 : 1997)DIN EN ISO 2818 Plastics Preparation of test specimens by machining (ISO 2818 : 1994)DIN EN ISO 3167 Plastics Multi-purpose test specimens (ISO 3167 : 1
16、993)DIN EN ISO 4589-1 Plastics Determination of burning behaviour by oxygen index Part 1: Guidance(ISO 4589-1 : 1996)DIN EN ISO 4589-2 Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test (ISO 4589-2 : 1996)DIN EN ISO 4589-3 Determination of the burning behavi
17、our of plastics by oxygen index Part 3: Elevated-temperature test (ISO 4589-3 : 1996)DIN EN ISO 6402-1 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene(AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding andextrusion materials Part 1: Desi
18、gnation system and basis for specifications(ISO 6402-1 : 2002)DIN EN ISO 8256 Plastics Determination of the tensile-impact strength of plastics (ISO 8256 : 1990,including Technical Corrigendum 1 : 1991)DIN EN ISO 10350 Plastics Acquisition and presentation of comparable single-point data (ISO 10350
19、: 1993)Page 2DIN EN ISO 6402-2 : 2004-05English versionICS 83.080.20Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPlasticsAcrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-
20、diene)-styrene (AEPDS) andacrylonitrile-(chlorinated polyethylene)-styrene (ACS)moulding and extrusion materialsPart 2: Preparation of test specimens and determination of properties(ISO 6402-2 : 2003) 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN nationa
21、l members.Ref. No. EN ISO 6402-2 : 2003 EPlastiques Matriaux pour mou-lage et extrusion base dacrylo-nitrile-styrne-acrylate (ASA),dacrylonitrile-(thylne-propylne-dine)-styrne (AEPDS) et dacrylo-nitrile-(polythylne chlor)-styrne(ACS) Partie 2: Prparation desprouvettes et dtermination desproprits (IS
22、O 6402-2 : 2003)Kunststoffe Acrylnitril-Styrol-Acrylat (ASA)-, Acrylnitril-(Ethylen-Propylen-Dien)-Styrol (AEPDS)- undAcrylnitril-(Chloriertes Polyethylen)-Styrol (ACS)-Formmassen Teil 2:Herstellung von Probekrpern undBestimmung von Eigenschaften(ISO 6402-2 : 2003)This European Standard was approved
23、 by CEN on 2003-11-10.CEN members are bound to comply with the CEN/CENELEC InternalRegulations which stipulate the conditions for giving this European Standardthe status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards ma
24、y be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French,German). A version in any other language made by translation under theresponsibility of a CEN member into its own language and notified to theManagement
25、Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerl
26、and, and the United Kingdom.|December 2003EN ISO 6402-2Supersedes EN ISO 6402-2 : 1999.Page 2EN ISO 6402-2 : 2003ForewordInternational StandardISO 6402-2 : 2003 Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated poly
27、ethylene)-styrene (ACS) moulding andextrusion materials Part 2: Preparation of test specimens and determination of properties,which was prepared by ISO/TC 61 Plastics of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 249 Plastics, the Secretariat of
28、 which is held by IBN, as a EuropeanStandard.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by June 2004 at the latest.In accordance with the CEN/CENELEC Internal Regu
29、lations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spai
30、n, Sweden, Switzerland, and theUnited Kingdom.Endorsement noticeThe text of the International Standard ISO 6402-2 : 2003 was approved by CEN as a European Standard withoutany modification.23335669Page 3EN ISO 6402-2 : 2003Page 4EN ISO 6402-2 : 2003Page 5EN ISO 6402-2 : 2003Page 6EN ISO 6402-2 : 2003Page 7EN ISO 6402-2 : 2003Page 8EN ISO 6402-2 : 2003Page 9EN ISO 6402-2 : 2003
