1、ICS 01.110Technical product documentationData fields in title blocks and document headers(ISO 7200 : 2004)English version of DIN EN ISO 7200Technische Produktdokumentation Datenfelder in Schriftfeldern und Dokumentenstammdaten(ISO 7200 : 2004)European Standard EN ISO 7200 : 2004 has the status of a
2、DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/CMC to adopt, withoutalteration, International Standard ISO 7200 as a European Standard.The responsible German body involved in its preparation was the Norm
3、enausschuss Technische Grundlagen(Fundamentals in Technology Standards Committee), Technical Committee Dokumentationswesen.DIN 2335 and DIN EN ISO 5457 are the standards corresponding to International Standards ISO 639 andISO 5457, respectively, referred to in clause 2 of the EN.AmendmentsDIN 6771-1
4、, December 1970 edition, has been superseded by the specifications of EN ISO 7200, which isidentical to ISO 7200.Previous editionsDIN 28-1: 1923-07; DIN 28-2: 1920-11; DIN 28-3: 1920-11; DIN 28-4: 1920-11; DIN 28-5: 1923-07;DIN 6781: 1949-10; DIN 6782: 1955-03; DIN 6771-1: 1949x-10, 1972-12.National
5、 Annex NAStandards referred to(and not included in Normative references and Annex ZA)DIN 2335 Codes for the representation of languagesDIN EN ISO 5457 Technical product documentation Sizes and layout of drawing sheets (ISO 5457 : 1999)DEUTSCHE NORM May 2004DIN EN ISO 7200 No part of this standard ma
6、y be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 9www.din.dewww.beuth.de9571756Continued overleaf.Document comprises 9 pages.08
7、.04G4G15G63G23G62G5Supersedes DIN 6771-1,December 1970 edition.English versionICS 01.110Technical product documentationData fields in title blocks and document headers(ISO 7200 : 2004) 2004. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. N
8、o. EN ISO 7200 : 2004 ETechnische Produktdokumentation Datenfelder in Schriftfeldern undDokumentenstammdaten(ISO 7200 : 2004)This European Standard was approved by CEN on 2004-01-26.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving thi
9、s European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English
10、, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Re
11、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN ISO 7200February 2004Management Centre: rue de Stassar
12、t 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungDocumentation technique de produits Champs de donnes dans les cartou-ches dinscription et ttes de docu-ments (ISO 7200 : 2004)Page 2EN ISO 7200 : 2004ForewordInternational StandardI
13、SO 7200 : 2004 Technical product documentation Data fields in title blocks and document headers,which was prepared by ISO/TC 10 Technical drawings, product definition and related documentation of theInternational Organization for Standardization, has been adopted by CEN/CMC as a European Standard.Th
14、is European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by August 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations
15、 of thefollowing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Sloven
16、ia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 7200 : 2004 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative.)Page 3EN ISO 7200 : 2004Page 4EN ISO 7200 : 2004Page 5EN ISO 7200 : 2004Page 6EN ISO 7200 : 2004Page 7EN ISO 7200 : 2004Page 8EN ISO 7200 : 2004
