1、December 2016 English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.20!%Us“2595080www.din.deD
2、IN EN ISO 8430-1Resistance spot welding Electrode holders Part 1: Taper fixing 1:10 (ISO 84301:2016);English version EN ISO 84301:2016,English translation of DIN EN ISO 8430-1:2016-12Widerstandspunktschweien Elektrodenhalter Teil 1: Kegelige Befestigung 1:10 (ISO 84301:2016);Englische Fassung EN ISO
3、 84301:2016,Englische bersetzung von DIN EN ISO 8430-1:2016-12Soudage par points par rsistance Portelectrodes Partie 1: Cne de fixation 1:10 (ISO 84301:2016);Version anglaise EN ISO 84301:2016,Traduction anglaise de DIN EN ISO 8430-1:2016-12SupersedesDIN EN 284301:199207www.beuth.deDocument comprise
4、s 10 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN ISO 8430-1:2016-12 2 A comma is used as the decimal marker. National foreword This document (EN ISO 8430-1:2016) has been prepared by Technical Committee ISO/TC
5、44 “Welding and allied processes”, Subcommittee SC 6 “Resistance welding and allied mechanical joining” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Sch
6、weien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Committee NA 092-00-12 AA Widerstandsschweien (DVS AG V 3). The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 1302 DIN EN ISO 1302 ISO 5182:2008
7、 DIN EN ISO 5182:2009-08 ISO 5183-1 DIN EN ISO 5183-1 ISO 5821 DIN EN ISO 5821 ISO 5828 DIN EN ISO 5828 Amendments This standard differs from DIN EN 28430-1:1992-07 as follows: a) in Clause 5, the second paragraph has been updated and there is no longer a reference to ISO 1642; b) the figures have b
8、een updated to comply with the latest ISO style and to reflect the latest edition of ISO 1302. Previous editions DIN 44768-1: 1980-01 DIN EN 28430-1: 1992-07 National Annex NA (informative) Bibliography DIN EN ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in techni
9、cal product documentation DIN EN ISO 5182:2009-08, Resistance welding Materials for electrodes and ancillary equipment (ISO 5182:2008) DIN EN ISO 5183-1, Resistance welding equipment Electrode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10 DIN EN ISO 5821, Resistance welding Spot weldi
10、ng electrode caps DIN EN ISO 5828, Resistance welding equipment Secondary connecting cables with terminals connected to water-cooled lugs Dimensions and characteristics EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8430-1 February 2016 ICS 25.160.30 Supersedes EN 28430-1:1992English Versi
11、on Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016) Soudage par points par rsistance - Porte-lectrodes - Partie 1: Cne de fixation 1:10 (ISO 8430-1:2016) Widerstandspunktschweien - Elektrodenhalter -Teil 1: Kegelige Befestigung 1:10 (ISO 8430-1:2016) This Eur
12、opean Standard was approved by CEN on 30 December 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
13、 concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN memb
14、er into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fra
15、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KO
16、MITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8430-1:2016 EForeword 41 Scope .52 Normative references 53 Dimensions .54 Designation 55 Mat
17、erials .66 Delivery conditions 67 Marking 6Contents PageEN ISO 8430-1:2016 (E) DIN EN ISO 8430-1:2016-12 2European foreword .3European foreword This document (EN ISO 8430-1:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committ
18、ee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withd
19、rawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 28430-1:1992. According
20、 to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gre
21、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 8430-1:2016 has been approved by CEN as EN ISO 8430-1:2016 wi
22、thout any modification. DIN EN ISO 8430-1:2016-12 EN ISO 8430-1:2016 (E) 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO te
23、chnical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates close
24、ly with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria ne
25、eded for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
26、 rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in
27、 this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barrier
28、s to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 6, Resistance welding and allied mechanical joining.This second edition cancels and replaces the first edition (ISO 8430
29、-1:1988), which has been technically revised. The following changes have been made: in Clause 5, the second paragraph has been updated and there is no longer a reference to ISO 1642; the figures have been updated to comply with the latest ISO style and to reflect the latest edition of ISO 1302.ISO 8
30、430 consists of the following parts, under the general title Resistance spot welding Electrode holders: Part 1: Taper fixing 1:10 Part 2: Morse taper fixing Part 3: Parallel shank fixing for end thrustEN ISO 8430-1:2016 (E) DIN EN ISO 8430-1:2016-12 4 1 ScopeThis part of ISO 8430 specifies the dimen
31、sions and tolerances of resistance spot welding electrode holders (type A) without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.2 Normative referencesThe following documents,
32、 in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1302, Geometrical Product Sp
33、ecifications (GPS) Indication of surface texture in technical product documentationISO 5182:2008, Resistance welding Materials for electrodes and ancillary equipmentISO 5183-1, Resistance welding equipment Electrode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10ISO 5821, Resistance wel
34、ding Spot welding electrode capsISO 5822, Spot welding equipment Taper plug gauges and taper ring gaugesISO 5828, Resistance welding equipment Secondary connecting cables with terminals connected to water-cooled lugs Dimensions and characteristicsISO 7285, Pneumatic cylinders for mechanized multiple
35、 spot weldingISO 9313, Resistance spot welding equipment Cooling tubes3 DimensionsThe dimensions shall be in accordance with Figure 1 and Table 1.4 DesignationThe designations of electrode holders which comply with this part of ISO 8430 shall comprise the following information in the order given:a)
36、the description block (i.e. “spot welding electrode holder”);b) a reference to this part of ISO 8430;c) the type of electrode holder (type A);d) the reference diameter, in millimetres;e) the total length, l4, in millimetres;EN ISO 8430-1:2016 (E) DIN EN ISO 8430-1:2016-12 5f) the material of which t
37、he electrode adaptor is made, in accordance with ISO 5182.EXAMPLE A type A (taper fixing) spot welding electrode holder, of reference diameter 16 mm, total length l4= 103 mm and material type A 2/1, shall be designated as follows:Spot welding electrode holder ISO 8430-1-A-16 103-A 2/15 MaterialsThe
38、material from which the electrode holder is made shall be in accordance with ISO 5182, preferably group A, type 2.The insulation shall be made from a material that is suitable for the application.6 Delivery conditionsThe fixing shall be protected against damage, e.g. by a coating of synthetic resin.
39、7 MarkingElectrode holders complying with this part of ISO 8430 shall be marked with the designation in accordance with Clause 4, but excluding the description block and the reference number of this part of ISO 8430, for example:A-16 103-A 2/1EN ISO 8430-1:2016 (E) DIN EN ISO 8430-1:2016-12 6 Dimens
40、ions in millimetres,surface roughness values in micrometresKey1 designation mark2 water inlet3 water outlet4 insulation5 hexagon socket pipe plug6 pipe pluga for the taper gauge, see ISO 5822NOTE Surface roughness in accordance with ISO 1302.Figure 1 DimensionsEN ISO 8430-1:2016 (E) DIN EN ISO 8430-
41、1:2016-12 7 Table 1 DimensionsDimensions in millimetresReference diameterad1d2e l1l2l3l4tTotal length of cooling tubeb13 12,7 11,1 52 80 50 13 85 26 l5c+ 1516 15,5 13,55280 50 138526 l5c+ 1670 10320 19 16,57090 60 2310336 l5c+ 2680 113aThe reference diameter corresponds to the electrode and electrod
42、e adaptor diameters.bSee ISO 9313.cSee ISO 5183-1.Key1 nut M12 6 electrode holder, see this part of ISO 84302 washer, clearance diameter 13 7 electrode adaptor, see ISO 93133 bolt M12 8 cooling tube type A, see ISO 93134 secondary connection cable, see ISO 5828 (position optional)9aelectrode cap, see ISO 5821see ISO 5183-15 welding cylinder, see ISO 7285Figure 2 Example of assemblyEN ISO 8430-1:2016 (E) DIN EN ISO 8430-1:2016-12 8
