1、May 2009DEUTSCHE NORM English price group 7No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 55.100!$W_8“1526021www.din.
2、deDDIN EN ISO 9100-14Glass containers Vacuum lug finishes Corrigendum AC:2009)English version of DIN EN ISO 9100-14:2009-05Glasbehlter Englische Fassung DIN EN ISO 9100-14:2009-05SupersedesDIN EN ISO 9100-14:2005-04www.beuth.de(includesDocument comprises 10 pagesVakuum-Nockenverschluss-Mndungen Teil
3、 14: 110 regular (ISO 9100-14:2005+Cor. 1:2008) (enthlt Berichtigung AC:2009)Part 14: 110 regular (ISO 9100-14:2005+Cor. 1:2008) DIN EN ISO 9100-14:2009-05 2 National foreword This standard has been prepared by Technical Committee CEN/TC 261 “Packaging“ (Secretariat: AFNOR, France) in collaboration
4、with Technical Committee ISO/TC 63 “Glass containers“. The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen (Packaging Standards Committee), Technical Committee NA 115-02-04 AA Behltnisse aus Glas. Corrigendum EN ISO 9100-14:2005/AC:2009 has been incorpora
5、ted in this standard. The start and finish of text introduced or altered by amendment is indicated in the text by tags AC . Amendments This standard differs from DIN EN ISO 9100-14:2005-04 as follows: a) Corrigendum AC:2009 has been incorporated: Dimension “0,8“ at the top left of Figure 3 has been
6、replaced with “0,85”. Previous editions DIN EN 9100-14: 2005-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9100-14 January 2005 +AC April 2009 ICS 55.100 English version Glass containers Vacuum lug finishes Part 14: 110 regular (ISO 9100-14:2005+Cor. 1:2008) Rcipients en verre Bagues c
7、rans pour bouchage sous vide Partie 14: 110 regular (ISO 9100-14:2005+Cor. 1:2008) Glasbehlter Vakuum-Nockenverschluss-Mndungen Teil 14: 110 regular (ISO 9100-14:2005+Cor. 1:2008) EN ISO 9100-14:2005 was approved by CEN on 2004-09-23 and Corrigendum AC:2009 on 2009-04-08. CEN members are bound to co
8、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Managemen
9、t Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the offici
10、al versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slov
11、enia, Spain, Sweden, Switzerland, and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN
12、 national Members. Ref. No. EN ISO 9100-14:2005+AC:2009 E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Dimensions.4 Bibliography 8 DIN EN IISO 9100-14:2009-05 EN ISO 9100-14:2005+AC:2009 (E)3 Foreword This document (EN ISO 9100-14:2005) has been prepared by Technical Committee CEN/T
13、C 261 “Packaging”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 “Glass containers”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and
14、 conflicting national standards shall be withdrawn at the latest by July 2005. Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack. It is based on CE.T.I.E (Inte
15、rnational Technical Centre for Bottling and Packaging) 1)data sheet GME 20-12 : 1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark,
16、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1) Centre Technique International de lEmbouteillage (CETIE), 3, rue La Botie, 7
17、5008 Paris, France, www.cetie.org EN ISO 9100-14:2005+AC:2009 (E)DIN EN IISO 9100-14:2009-05 4 1 Scope This document specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers. 2 Normative references Not applicable 3 Dimensions 3.1 The desig
18、n and dimension of the finish shall be as shown in Figures 1 to 3 and Table 1. 3.2 Details which are not specified shall be selected in accordance with the application. For general tolerances see EN 22768-1. Dimensions in millimetres Figure 1 Cutter profile DIN EN IISO 9100-14:2009-05 EN ISO 9100-14
19、:2005+AC:2009 (E)5 Dimensions in millimetres Key a) Parting line b) See Figure 3 Figure 2 Thread construction DIN EN ISO 9100-14:2009-05EN ISO 9100-14:2005+AC:2009 (E)6 Dimensions in millimetres Key a) The sealing surface shall be free of checks, dips, crizzles and other defects which may affect pro
20、per functioning. b) Proper system functioning calls for keeping the ovality in the finish diameters to a minimum. E and T diameters should be concentric in relation to one another. c) Cross-hatched areas of C diameter and H height show the closure position. Glass shall clear cap limits shown. The co
21、ntour below the H dimension as well as the design of a possible bead are optional. Sufficient free space shall be provided between the bead and the cross-hatched area. Figure 3 Enlarged view section A-A DIN EN IISO 9100-14:2009-05 EN ISO 9100-14:2005+AC:2009 (E) 7 Table 1 Dimensions Thread parameter
22、s Thread parameters Type Diameter E (mm) DiameterT (mm) Diameter C (mm) Cuttera) Leads Pitch (mm) T.P.I.b) 1 Pitch (mm) T.P.I.b) 110 105,20 0,60 108,35 0,60 98,30 457 8 457 29,05 7/8 837 50,85 1/2 a) The cutter inclination at -angle shall be maintained for all cuts. The start and end of the leads co
23、rrespond to the cut-in profile as defined by the cutter diameter, except where riffles are required to permit mould opening. b) Threads per inch DIN EN ISO 9100-14:2009-05EN ISO 9100-14:2005+AC:2009 (E)8 Bibliography EN 22768-1, General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) DIN EN IISO 9100-14:2009-05 EN ISO 9100-14:2005+AC:2009 (E)
