1、October 2014 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 17.140.20; 59.120.99!%;jh“2247169www.din.deDDIN EN ISO 9902-4Textile machinery Noise test code Part 4: Yarn processing, cordage and rope manufacturing machinery(ISO 9902-4:2001 + Amd 1:2009 + Amd 2:2014);English version EN ISO 9902-4:2001 + A1:2009 + A2:2014,English translation of DIN EN ISO 9902-
3、4:2014-10Textilmaschinen Geruschmessverfahren Teil 4: Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen (ISO 9902-4:2001 + Amd 1:2009 + Amd 2:2014);Englische Fassung EN ISO 9902-4:2001 + A1:2009 + A2:2014,Englische bersetzung von DIN EN ISO 9902-4:2014-10Matriel pour lindustrie textile Code d
4、essai acoustique Partie 4: Machines de transformation du fil et machines de production de cordages etarticles de corderie(ISO 9902-4:2001 + Amd 1:2009 + Amd 2:2014);Version anglaise EN ISO 9902-4:2001 + A1:2009 + A2:2014,Traduction anglaise de DIN EN ISO 9902-4:2014-10SupersedesDIN EN ISO 9902-4:200
5、9-12See start of applicationwww.beuth.deDocument comprises 19 pagesIn case of doubt, the German-language original shall be considered authoritative.09.14 DIN EN ISO 9902-4:2014-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2014-10-01. D
6、IN EN ISO 9902-4:2009-12 may be used in parallel until 2014-12-31. National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN ISO 9902-4:2001 + A1:2009 + A2:2014) has been prepared by Technic
7、al Committee ISO/TC 72 “Textile machinery and accessories“, Subcommittee SC 8 “Safety requirements for textile machinery“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, Working Group WG 4 “Measurement and reduction of noise” (Secretariat: DIN, Germany). The
8、 responsible German body involved in its preparation was the DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen - Sicherheitsanforderungen, Lrmminderung, Bildzeichen; Sp
9、A zu ISO/TC 72/SC 8/WG 1, ISO/TC 72/SC 8/WG 2, ISO/TC 72/SC 10, CEN/TC 214/WG 1 und CEN/TC 214/WG 4. The start and finish of text introduced or altered by Amendments A1:2009 and A2:2014 is indicated in the text by tags !“ and #$ respectively. DIN EN ISO 9902 consists of the following parts, under th
10、e general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufactur
11、ing machinery Part 7: Dyeing and finishing machinery Amendment of the European Machinery Directive has made it necessary to review the previously valid standard, EN ISO 9902-4:2001, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains spe
12、cifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, effective from 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of co
13、mpliance with the essential requirements of that directive. DIN EN ISO 9902-4:2014-10 3 Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the M
14、achinery Directive (“presumption of conformity”). The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 3743-1 DIN EN ISO 3743-1 ISO 9902-1 DIN EN ISO 9902-1 ISO 3744 DIN EN ISO 3744 ISO 11111-4 DIN EN ISO 11111-4 ISO 3746 DIN EN ISO 3746 ISO
15、 11201 DIN EN ISO 11201 ISO 3747 DIN EN ISO 3747 ISO 11202 DIN EN ISO 11202 ISO 9614-1 DIN EN ISO 9614-1 ISO 11203 DIN EN ISO 11203 ISO 9614-2 DIN EN ISO 9614-2 ISO 11204 DIN EN ISO 11204 Amendments This standard differs from DIN EN ISO 9902-4:2009-12 as follows: a) in Subclause 1, a note has been a
16、dded stating that grade 1 methods are normally not feasible for textile machinery; b) Annex ZA has been revised. Previous editions DIN 45635-32: 1980-05 DIN EN ISO 9902-4: 2001-07, 2009-12 DIN EN ISO 9902-4:2014-10 4 National Annex NA (informative) Bibliography DIN EN ISO 3743-1, Acoustics Determina
17、tion of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room DIN EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels o
18、f noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane DIN EN ISO 3746, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a ref
19、lecting plane DIN EN ISO 3747, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment DIN EN ISO 9614-1, Acoustics Determination of sound power levels of noise sources using s
20、ound intensity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 9902-1, Textile machinery Noise test code Part 1: Common requirements DIN EN ISO 11111-4, Textile m
21、achinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a r
22、eflecting plane with negligible environmental corrections DIN EN ISO 11202, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections DIN EN ISO 11203, Acoustics
23、 Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work stati
24、on and at other specified positions applying accurate environmental corrections EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9902-4 March 2001 + A1 +A2 March 2009 June 2014 ICS 17.140.20; 59.120.10 English Version Textile machinery Noise test code Part 1: Yarn processing, cordage and rop
25、e manufacturing machinery (ISO 9902-4:2001 + Amd 1:2009 + Amd 2:2014) Matriel pour lindustrie textile - Code dessai acoustique - Partie 1: Machines de transformation du fil et machines de production de cordages et articles de corderie (ISO 9902-4:2001 + Amd 1:2009 + Amd 2:2014) Textilmaschinen - Ger
26、uschmessverfahren - Teil 1: Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen (ISO 9902-4:2001 + Amd 1:2009 + Amd 2:2014) EN ISO 9902-4:2001 was approved by CEN on 2001-03-15, Amendment A1:2009 on 2009-03-12 and Amendment A2:2014 on 2014-05-07. CEN members are bound to comply with the CEN/CEN
27、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre
28、or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the of
29、ficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland
30、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitati
31、on in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9902-4:2001 + A1:2009 + A2:2014 E Contents Page Foreword to EN ISO 9902-4:2001 3 Foreword to EN ISO 9902-4:2001/A1:2009 .4 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Defining the test ob
32、ject .7 5 Sound power level determination 7 6 Emission sound pressure level determination.8 7 Installation and mounting conditions9 8 Operating conditions.9 9 Measurement uncertainties 9 10 Information to be recorded .9 11 Information to be reported9 12 Declaration and verification of noise emission
33、 values9 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .14 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .15 2DIN EN ISO 9902-4:2014-10 EN ISO
34、 9902-4:2001+A1:2009 + A2:2014 (E)Foreword to EN ISO 9902-4:2001/A2:2014.5 # $! “!#$3DIN EN ISO 9902-4:2014-10 EN ISO 9902-4:2001+A1:2009 + A2:2014 (E)Foreword to EN ISO 9902-4:2001 This document (EN ISO 9902-4:2001) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery
35、 for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by pub
36、lication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, an
37、d supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
38、 this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. End
39、orsement notice The text of ISO 9902-4:2001 has been approved by CEN as EN ISO 9902-4:2001 without any modification. NOTE Normative references to International Standards are listed in Annex ZA (normative). Attention is drawn to the possibility that some of the elements of this document may be the su
40、bject of patent rights. CEN/CENELEC shall not be held responsible for identifying any or all such patent rights. This first edition of ISO 9902-4, together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-5, ISO 9902-6 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically r
41、evised. ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving an
42、d knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery Annex ZB of this part of ISO 9902 is for information only. !Foreword to EN ISO 9902-4:2001/A1:2009 This document (EN ISO 9902-4:2001/A1:2009) has been prepared by Technical Committee ISO/TC
43、 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-4:2001 shall be given the status of
44、a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subjec
45、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. F
46、or relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgar
47、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice 4DIN EN IS
48、O 9902-4:2014-10 EN ISO 9902-4:2001+A1:2009 + A2:2014 (E)The text of ISO 9902-4:2001/Amd 1:2009 has been approved by CEN as EN ISO 9902-4:2001/A1:2009 without any modification. “ #Foreword to EN ISO 9902-4:2001/A2:2014 This document (EN ISO 9902-4:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories
