1、October 2014 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 17.140.20; 59.120.30; 59.120.40!%;ji“2247170www.din.deDDIN EN ISO 9902-5Textile machinery Noise test code Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001 + Amd 1:2009 + Amd 2:2014);English version EN ISO 9902-5:2001 + A1:2009 + A2:2014,English translation of DIN EN ISO 9902-5:2
3、014-10Textilmaschinen Geruschmessverfahren Teil 5: Vorbereitungsmaschinen fr die Weberei und Kettenwirkerei (ISO 9902-5:2001 + Amd 1:2009 + Amd 2:2014);Englische Fassung EN ISO 9902-5:2001 + A1:2009 + A2:2014,Englische bersetzung von DIN EN ISO 9902-5:2014-10Matriel pour lindustrie textile Code dess
4、ai acoustique Partie 5: Machines de prparation au tissage et au tricotage (ISO 9902-5:2001 + Amd 1:2009 + Amd 2:2014);Version anglaise EN ISO 9902-5:2001 + A1:2009 + A2:2014,Traduction anglaise de DIN EN ISO 9902-5:2014-10SupersedesDIN EN ISO 9902-5:2009-12See start of applicationwww.beuth.deDocumen
5、t comprises 17 pagesIn case of doubt, the German-language original shall be considered authoritative.09.14 DIN EN ISO 9902-5:2014-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2014-10-01. DIN EN ISO 9902-5:2009-12 may be used in paralle
6、l until 2014-12-31. National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN ISO 9902-5:2001 + A1:2009 + A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and a
7、ccessories”, Subcommittee SC 8 “Safety requirements for textile machinery” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, Working Group WG 4 “Measurement and reduction of noise” (Secretariat: DIN, Germany). The responsible German body involved in its prepar
8、ation was the DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen - Sicherheitsanforderungen, Lrmminderung, Bildzeichen; SpA zu ISO/TC 72/SC 8/WG 1, ISO/TC 72/SC 8/WG 2,
9、ISO/TC 72/SC 10, CEN/TC 214/WG 1 und CEN/TC 214/WG 4. The start and finish of text introduced or altered by Amendments A1:2009 and A2:2014 is indicated in the text by tags !“ and #$ respectively. DIN EN ISO 9902 consists of the following parts, under the general title Textile machinery Noise test co
10、de: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing mach
11、inery Amendment of the European Machinery Directive has made it necessary to review the previously valid standard, EN ISO 9902-5:2001, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements
12、set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, effective from 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of tha
13、t directive. DIN EN ISO 9902-5:2014-10 3 Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”
14、). The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 2544 DIN 62500 ISO 9614-2 DIN EN ISO 9614-2 ISO 3744 DIN EN ISO 3744 ISO 9902-1 DIN EN ISO 9902-1 ISO 3746 DIN EN ISO 3746 ISO 11201 DIN EN ISO 11201 ISO 3747 DIN EN ISO 3747 ISO 11202
15、DIN EN ISO 11202 ISO 9614-1 DIN EN ISO 9614-1 ISO 11204 DIN EN ISO 11204 Amendments This standard differs from DIN EN ISO 9902-5:2009-12 as follows: a) in Subclause 1, a note has been added stating that grade 1 methods are normally not feasible for textile machinery; b) Annex ZA has been revised. Pr
16、evious editions DIN 45635-32: 1980-05 DIN EN ISO 9902-5: 2001-07, 2009-12 DIN EN ISO 9902-5:2014-10 4 National Annex NA (informative) Bibliography DIN 62500, Warp preparation and facilities for warp preparation Terms and definitions DIN EN ISO 3744, Acoustics Determination of sound power levels and
17、sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane DIN EN ISO 3746, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measureme
18、nt surface over a reflecting plane DIN EN ISO 3747, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment DIN EN ISO 9614-1, Acoustics Determination of sound power levels of
19、noise sources using sound intensity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 9902-1, Textile machinery Noise test code Part 1: Common requirements DIN EN I
20、SO 11201, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections DIN EN ISO 11202, Acoustics Noise emitted by
21、machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work sta
22、tion and at other specified positions applying accurate environmental corrections EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9902-5 March 2001 + A1 +A2 March 2009 June 2014 ICS 17.140.20; 59.120.30; 59.120.40 English Version Textile machinery Noise test code Part 5: Weaving and knittin
23、g preparatory machinery (ISO 9902-5:2001 + Amd 1:2009 + Amd 2:2014) Matriel pour lindustrie textile - Code dessai acoustique - Partie 5: Machines de prparation au tissage et au tricotage (ISO 9902-5:2001 + Amd 1:2009 + Amd 2:2014) Textilmaschinen - Geruschmessverfahren - Teil 5: Vorbereitungsmaschin
24、en fr die Weberei und Kettenwirkerei (ISO 9902-5:2001 + Amd 1:2009 + Amd 2:2014) EN ISO 9902-5:2001 was approved by CEN on 2001-03-15, Amendment A1:2009 on 2009-03-12 and Amendment A2:2014 on 2014-05-07. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
25、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exi
26、sts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national st
27、andards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
28、Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwi
29、de for CEN national Members. Ref. No. EN ISO 9902-5:2001 + A1:2009 + A2:2014 E Contents Page Foreword to EN ISO 9902-5:2001 3 Foreword to EN ISO 9902-5:2001/A1:2009 .4 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Defining the test object .7 5 Sound power level determination 7 6 Em
30、ission sound pressure level determination.7 7 Installation and mounting conditions9 8 Operating conditions.9 9 Measurement uncertainties 9 10 Information to be recorded .9 11 Information to be reported9 12 Declaration and verification of noise emission values9 Annex ZA (informative) Relationship bet
31、ween this European Standard and the Essential Requirements of EU Directive 2006/42/EC .12 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .13 DIN EN ISO 9902-5:2014-10 EN ISO 9902-5:2001+A1:2009 + A2:2014 (E) 2Foreword to E
32、N ISO 9902-5:2001/A2:2014 .5# $!“#$!“DIN EN ISO 9902-5:2014-10 EN ISO 9902-5:2001+A1:2009 + A2:2014 (E) 3Foreword to EN ISO 9902-5:2001 This document (EN ISO 9902-5:2001) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” i
33、n collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen
34、t, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Direct
35、ive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyp
36、rus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 9902-5:2001 ha
37、s been approved by CEN as EN ISO 9902-5:2001 without any modification. NOTE Normative references to International Standards are listed in Annex ZA (normative). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN/CENELEC shall not
38、be held responsible for identifying any or all such patent rights. This first edition of ISO 9902-5, together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-6 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised. ISO 9902 consists of the following par
39、ts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabri
40、c manufacturing machinery Part 7: Dyeing and finishing machinery Annex ZB of this part of ISO 9902 is for information only. !Foreword to EN ISO 9902-5:2001/A1:2009 This document (EN ISO 9902-5:2001/A1:2009) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-c
41、leaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-5:2001 shall be given the status of a national standard, either by publication of
42、an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall n
43、ot be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EU Directives, see inform
44、ative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia,
45、Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice DIN EN ISO 9902-5:2014-10 EN ISO 9902-5:2001+A1:2009 + A
46、2:2014 (E) 4The text of ISO 9902-5:2001/Amd 1:2009 has been approved by CEN as EN ISO 9902-5:2001/A1:2009 without any modification. “ #Foreword to EN ISO 9902-5:2001/A2:2014 This document (EN ISO 9902-5:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessori
47、es” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-5:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsem
48、ent, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Fr
