1、April 2011 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、13.180!$nev“1756683www.din.deDDIN EN ISO 24501Ergonomics Accessible design Sound pressure levels of auditory signals for consumer products(ISO 24501:2010)English translation of DIN EN ISO 24501:2011-04Ergonomie Zugngliche Gestaltung Schalldruckpegel von akustischen Signalen fr Konsumgter (ISO 24501:
3、2010)Englische bersetzung von DIN EN ISO 24501:2011-04Ergonomie Conception accessible Niveaux de pression acoustique des signaux auditifs pour produits de consommationcourante (ISO 24501:2010)Traduction anglaise de DIN EN ISO 24501:2011-04www.beuth.deIn case of doubt, the German-language original sh
4、all be considered authoritative.Document comprises 27 pages03.11 DIN EN ISO 24501:2011-04 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 159 “Ergonomics”, Subcommittee SC 5 “Ergonomics of the physical environment”, Working Group
5、 WG 5 “Physical environments for people with special requirements” in collaboration with Technical Committee CEN/TC 122 “Ergonomics” (Secretariat: DIN, Germany). The responsible German bodies involved in its preparation were the Normenausschuss Ergonomie (Ergonomics Standards Committee) and the Norm
6、enausschuss Informationstechnik und Anwendungen (Information Technology and selected IT Applications Standards Committee), Joint Working Committee NA 023-00-02 GA Gemeinschaftsarbeitsausschuss NAErg/NIA: Grundlagen zur barrierefreien Gestaltung/ Accessibility. The DIN Standards corresponding to the
7、International Standards referred to in this document are as follows: ISO 7731:2003 DIN EN ISO 7731:2008-12 ISO 20282-1:2006 DIN ISO 20282-1:2008-10 ISO 24500:2010 DIN EN ISO 24500 IEC 60050-801 DIN IEC 60050-801 IEC 61260 DIN EN 61260 IEC 61672-1 DIN EN 61672-1 ISO/IEC Guide 71:2001 DIN-Fachbericht
8、DIN Technical Report) 131:2003 ISO/TR 22411:2008 DIN-Fachbericht (DIN Technical Report) ISO/TR 22411National Annex NA (informative) Bibliography DIN EN ISO 7731:2008-12, Ergonomics Danger signals for public and work areas Auditory danger signals DIN ISO 20282-1:2008-10, Ease of operation of everyda
9、y products Part 1: Design requirements for context of use and user characteristics DIN EN ISO 24500, Ergonomics Accessible design Auditory signals for consumer products DIN IEC 60050-801, International Electrotechnical Vocabulary Chapter 801: Acoustics and electroacoustics DIN EN 61260, Electroacous
10、tics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN-Fachbericht 131:2003, Guidelines for standards developers to address the needs of older persons and persons with disabilities German and English version CEN/CENELEC Guid
11、e 6 DIN-Fachbericht ISO/TR 22411 , Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities 1)1) Under preparation. 2 1)EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 24501 December 2
12、010 ICS 13.180; 11.180.15 English Version Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010) Ergonomie - Conception accessible - Niveaux de pression acoustique des signaux auditifs pour produits de consommation courante (ISO 24501:2010)
13、Ergonomie - Zugngliche Gestaltung - Schalldruckpegel von akustischen Signalen fr Konsumgter This European Standard was approved by CEN on 14 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s
14、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,
15、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr
16、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDAR
17、DIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 24501:2010: E(ISO 24501:2010) Contents Page Forewo
18、rd .3 Introduction.4 1 Scope5 2 Normative references5 3 Terms and definitions .5 4 Symbols6 5 Range of sound pressure levels of auditory signals.6 5.1 General .6 5.2 When not considering the masking effect of an interfering sound .7 5.2.1 General .7 5.2.2 Method using octave-band analysis or one-thi
19、rd-octave-band analysis 7 5.3 When taking the masking effect of interfering sound into consideration.8 5.3.1 Method using A-weighted sound pressure level measurement.8 5.3.2 Method using octave-band analysis9 5.3.3 Method using one-third-octave-band analysis.9 Annex A (normative) Method for measurin
20、g the sound pressure level of an auditory signal11 Annex B (normative) Method for measuring the sound pressure level of interfering sound.15 Annex C (informative) Example of the record of measurement conditions and results .18 Annex D (informative) Examples of measurement and range setting of the so
21、und pressure level of auditory signals.20 Bibliography2 2DIN EN ISO 24501:2011-04 EN ISO 24501:2010 (E) 5Foreword This document (EN ISO 24501:2010) has been prepared by Technical Committee ISO/TC 159 “Ergonomics” in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of wh
22、ich is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibili
23、ty that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bo
24、und to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
25、 Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 24501:2010 has been approved by CEN as a EN ISO 24501:2010 without any modification. 3DIN EN ISO 24501:2011-04 EN ISO 24501:2010 (E) Introduction People conduct their daily lives surrounded by various consumer products.
26、Consumer products, as defined in ISO 20282-1, include home electrical appliances, information and telecommunication products, gas-heating equipment, toys, sanitary equipment, and health-care products, many of which use auditory signals. These auditory signals can be indistinct because of the hearing
27、 loss which occurs with ageing or because of interfering sounds in the surroundings. Also, with age, our visual ability declines gradually. Auditory signals with an appropriate sound level can assist product users with auditory or visual impairment in using the product correctly and safely. This Int
28、ernational Standard specifies methods for determining an appropriate sound level range of auditory signals, so that all product users, including people with age-related hearing loss, can hear them properly against interfering sounds. This sound level range specification was determined, based on resu
29、lts of experiments in which people of all ages participated. Auditory signals whose sound pressure level is in that range are expected to be audible and comfortably loud for most users in the presence of interfering sounds. This International Standard should be applied as appropriate to products, de
30、pending on the product type and its conditions of use. It does not apply to machines and equipment used for professional work. This International Standard adopts the principles of accessible design given in ISO/IEC Guide 71 and amplified in ISO/TR 22411. 4DIN EN ISO 24501:2011-04 EN ISO 24501:2010 (
31、E) 1 Scope This International Standard specifies methods for determining the sound pressure level range of auditory signals so that the users of consumer products, including people with age-related hearing loss, can hear the signal properly in the presence of interfering sounds. Auditory signals, in
32、 this International Standard, refer to sounds with a fixed frequency (also called beep sounds) and do not include variable frequency sounds, melodic sounds, or voice guides. This International Standard is applicable to auditory signals which are heard at an approximate maximum distance of 4 m from t
33、he product, as long as no physical barrier exists between the product and the user. It is not applicable to auditory signals heard through a head receiver or earphones, or to those heard with the ear located very near to the sound source because of the interference of the head with sound propagation
34、 This International Standard does not specify the sound pressure level of auditory signals regulated by other statutes, such as those for fire alarms, gas leakages and crime prevention, nor does it specify auditory signals particular to a communication tool such as telephones. This International St
35、andard does not specify auditory danger signals for public or work areas which are covered in ISO 7731, ISO 8201, and ISO 11429. 2 Normative references The following referenced standards are indispensable for the application of this document. For undated references, the latest edition of the referen
36、ced document (including any amendments) applies. ISO 24500:2010, Ergonomics Accessible design Auditory signals for consumer products IEC 60050-801, International electrotechnical vocabulary Chapter 801: Acoustics and electroacoustics IEC 61260, Electroacoustics Octave-band and fractional-octave-band
37、 filters IEC 61672-1, Electroacoustics Sound level meters Part 1: Specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 24500 and IEC 60050-801 and the following apply. 3.1 product actuation sound sound generated by actuation of the consumer
38、 product which incorporates the auditory signal to be designed EXAMPLE A cooling-fan noise. 5DIN EN ISO 24501:2011-04 EN ISO 24501:2010 (E) 3.2 living environment sound sound generated in the room where the consumer product which incorporates the auditory signal to be designed is used NOTE This incl
39、udes a sound generated by user behaviour (e.g. sound of water generated when washing dishes in a kitchen) or an actuation sound of some other product incorporating the auditory signal to be designed (e.g. actuation sound of a vacuum cleaner). 3.3 interfering sound product actuation sound or living e
40、nvironment sound which is likely to have the greatest effect on audibility of the auditory signal to be designed 3.4 ambient noise sound other than the sound to be measured as an auditory signal or as an interfering sound at the measurement location EXAMPLE Outside traffic noise. 4 Symbols For the p
41、urposes of this document, the following symbols apply. LS,AA-weighted sound pressure level of an auditory signal, in decibels, measured using the method specified in Annex A. LN,AA-weighted sound pressure level of interfering sound, in decibels, measured using the method specified in Annex B. LS,oct
42、level of the frequency band, in decibels, which has the maximum value among octave-band sound pressure levels of auditory signals, measured using the method specified in Annex A. LN,octoctave-band sound pressure level, in decibels, of interfering sound at the same frequency band as LS,oct, measured
43、using the method specified in Annex B. LS,1/3octlevel of the frequency band, in decibels, which has the maximum value among one-third-octave-band sound pressure levels of auditory signals, measured using the method specified in Annex A. LN,1/3octone-third-octave-band sound pressure level, in decibel
44、s, of interfering sound at the same frequency band as LS,1/3oct, measured using the method specified in Annex B. 5 Range of sound pressure levels of auditory signals 5.1 General The range of sound pressure levels of auditory signals shall be determined following the procedure in 5.2 or 5.3, dependin
45、g on whether the masking effect of interfering sound is taken into consideration or not. When an auditory signal with a fixed sound level is used, the level shall be selected to fall in the range specified by application of the method. When the sound level is controllable by the user, the level shal
46、l be variable to cover the entire range. NOTE It is important for designers to consider the implication of adjustable volume controls with respect to caution signals, if the adjustable range extends below the lower end specified by application of the method. An example of the record of measurement c
47、onditions and results is shown in Annex C. Some examples of measurement and range setting of the sound pressure level of auditory signals are shown in Annex D. 6DIN EN ISO 24501:2011-04 EN ISO 24501:2010 (E) 5.2 When not considering the masking effect of an interfering sound 5.2.1 General For a case
48、 in which the masking effect of interfering sound can be ignored because its level is very low, only the users hearing-ability change which occurs with ageing is considered for setting the range of the sound pressure level of the auditory signal. The range of the sound pressure level shall be determined in accordance with either method using octave-band analysis or one-third-octave-band analysis, both of which are described in 5.2.2. For the methods for measuring the sound pressure level using octave-band ana
