1、A-A-55059 84 9999974 0066879 T D A-A-5 50 5 9 04 JUNE 1992 COMMERCIAL ITEM DESCRIPTION CARRIER, POLICEMANS CLUB, WITH GROMMET The General Services Administra-tion has authorized the use of this commercial item description in preference to Military Specification MIL-C-1933. Abstract. The carrier is i
2、ntended for use by members of the Military Police and is used with a leather belt. This CID covers the requirements .for one type of carrier, grommet for a,policemans club, SALIENT CHARACTERISTICS General Description. The Carrier shall consist of a strap 3/4 inch width, 8/64 to 9/64 inch thick, appr
3、oximately 9 inch length looped at both ends. The loops- will consist of a large loop to fit on belt and a small loop with 1-3/4 inch metal O-ring inserted. A metal rivet will Connect both loops. There will also be one rubber Grommet Stopper with 1-3/16 inch inside diameter and 2-5/32 inch outside di
4、ameter. The rubber retaining grommet is designed to be placed on the club to prevent it from one type of rubber Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center,
5、Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street,Philadelphia, PA 19101-8419, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8465 DISTRIBUTION STATEMENT A. Approved fo
6、r public release; distribution is unlimited. Licensed by Information Handling Services7 I A-A-55057 84 97q7774 OObb80 b A-A-5 5 O 5 9 sliding through the O-ring of the carrier. Figures are furnished for information purposes only. Drawing number 2-9-305 covers the Carrier, Policemans Club. Copies of
7、this drawing should be obtained from the procuring activity or as directed by the contracting officer. When inconsistencies exist between the written commercial item description and the figures, the written commercial item description shall govern. Material. The strap shall be made of leather, cattl
8、ehide .(full grain or corrected grain) mildew resistant and treated with a fungicide containing not less than 0.18 percent nor more than 0.70 percent paranitrophenol. The grain side of the leather, shall be black, and have a smooth finish, The edges of the leather strap shall be treated with a non-s
9、taining black finish so as to match the grain side. The metal rivet and cap shall hav a black oxide coating. The metal O-ring shall be black in color. The grommet shall be made of rubber. QUALITY ASSURANCE Product Demonstration Model. When required, offerers shall submit (2) Carriers and Grommets of
10、 their intended production. The Product Demonstration Model will consist of units independently developed. Product Demonstration Models will be analyzed and evaluated by the government. Evaluation criteria and basis for award are contained in the solicitation. Product Demonstration Models will be re
11、tained by the government. One (1) Product Demonstration Model approved by DPSC under the resultant contract will serve as a manufacturing standard for the corresponding production items delivered under this contract. Offerers are advised that the Product Demonstration Model does not relieve the succ
12、essful offerer of his responsibility to perform in accordance with the Commercial Item Description specified above. Certification. The contractor shall certify, and maintain objective quality evidence, that the product offered meets this commercial item description, and that the product conforms to
13、the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Visual Examination. The inspect
14、ion level shall be II and the AQL expressed in defects per one hundred shall be 4.0 in accordance with ANSI/ASQC 21.4. The Carrier and Grommet shall be examined for the following defects: not specified color; color not uniform; grain side not smooth finished; edge not stained to match grain side; an
15、y component omitted or misplaced; part fractured, ripped, punctured, torn, defective, malformed, or damaged; hole cut or rupture; Brand mark; healed grub damage, scar tissue, hip mark, brittle or bony area; abraded, scratched, Licensed by Information Handling ServicesA-A-55059 84 9999974 OObb88L 8 I
16、 A-A-5 5 05 9 or other grain damage; flaky, spongy, pipey or stretchy leather; Any wrinkle; O-ring defective or not securely affixed; rivet not sufficiently set; sharp edge, burr or metal sliver; any non-removable stain or spot. Requlatory Requirements. The offeror/contractor is encouraged to use re
17、covered materials in accordance with Public Law 94-580 to the maximum extent practicable. O PACKAGING Packaqinq, Packinq, Markinq and Palletization. Packaging, packing marking and palletization shall be in accordance with ASTM-D 3951, Standard Practice for Commercial Packaging, as specified for ship
18、ments to the Department of Defense, including section 7. Unitized loads, placing boxes on pallets, shall be used whenever total quantity for shipment to one destination exceeds 250 pounds (excluding the pallet) or 20 cubic feet. Pallets shall have a length of 40 inches and a width of 48 inches. Pall
19、et loads, including the pallet, shall not exceed 54 inches in height, 43 inches in length and 52 inches in width. The containers shall be bonded onto wing type commercial 4-way 0 entry pallets. Prohibited Packinq Materials. The use of asbestos, excelsior, newspaper or shredded paper (all types inclu
20、ding waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. Notes Application for copies of ASTM D 3951 should be addressed to the American Society for testing and materials, 1916 Race St., Philadelphia PA 19103-1187. Application for copies of ANSI 21. 4 should b
21、e addressed to the American National Standards Institute, 11 West 42nd St., New York, NY 10036 (ATTN: Sales Dept.) Custodian: Civil Agency Coordinating Army - GL Activity: Air Force - 99 GSA - FSS Review Activity: Preparing- Activity: Army - GL DLA - CT Air Force - 45, 82 Project No. 8465-0095 e Licensed by Information Handling Services- A-A-55059 84 = 9999974 0066882 T E CARRIER (SIDE VIEW) GROMMET (SIDE VIEW) GROMMET (FRONT VIEW) . Figure 1 - CARRIER, POLICEMANS CLUB, WITH GROMMET 4 Licensed by Information Handling Services
