1、A-A-55QbA 7999774 0173148 T4 - -. A-A-55068A July 05 1996 .- SUPERSEDING A-A-5 5 O 68 September 20 1991 COMMERCIAL ITEM DESCRIPTION JERSEY, FLIGHT DECK CREWMAN The General Services Administration has authorized the use of this commercial item description. 1. SCOPE. This commercial item description c
2、overs the requirements for a long sleeve, pullover type jersey. The jersey is intended for wear by flight deck personnel aboard aircraft carriers to designate their assigned duties as follows: White Blue Green Yellow Brown Red L Purple Phone talkers Plane pushers Catapult and arresting gear personne
3、l Flight deck officers and directors Plane captains and mechanics Ordnance personnel Fuel handlers 2. SALIENT CHARACTERISTICS 2.1 Description. The jersey shall be a pullover type with a collarette. Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which ma
4、y improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FNS, 2800 South 20th Street, Philadelphia, PA 19145-5099. AMSC N/A DISTRIBUTION STATEMENT A. FSC 8415 Approved for public release; distribution is unlimited. Licensed by Informa
5、tion Handling ServicesA-A-55bA = 9999974 0173149 730 CHARACTERISTICS Weight Bursting strength (min.) A-A-55068A REQUIREMENTS TEST METHOD 6 to 8 oz/sq yd ASTM D3776-1985 70 lbs ASTM D3787-1989 2.1 Description - cont. The collarette height shall be 4-6 inches when measured vertically between the colla
6、rettelshirt seam and the folded collarette top edge, long sleeves (conventional set-in) with wristlets and extended back length. be of double thickness 1 x 1 rib knit material for stretchability. body shall have a two piece construction with side seams and a back tail piece that shall be 3 to 3-1/2
7、inches longer than the front piece. body of the jersey shall be made from 100% combed cotton, jersey, or interlock knitted material conforming to the requirements in Table I. The back collarette and the shoulder seams shall be reinforced by one continuous length of binding approximately 5/8 inch wid
8、e, or the shoulder seams shall be reinforced by elastic or tape. shall be a minimum of 3-1/2 inches wide when positioned flat and measured between the bottom folded edges and a minimum of 3 inches long when measured vertically between the top seam and the bottom folded edge of the wristlet. The bott
9、om of the jersey shall have a finished hem of the same width. shall approximate the color of the finished Jersey. The collarette and wristlets shall The The The wristlet Any commercially acceptable thread shall be used and SLEEVE LENGTH C 26-3/4 27 27-114 27-112 TABLE I - Requirements COLLARETTE OPE
10、NING D 8-112 8-314 9 9-112 TABLE II. - Sizes and measurements (minimum/inches) SIZES SMALL MEDIUM LARGE X-LARGE CHEST WIDTH A 37 41 45 49 FRONT LENGTH B 30 30-1/2 31 31-1/2 A The chest width is obtained by doubling the measurement across the front, 1 inch below the armhole seam, from folded edge to
11、folded edge. B The front length is obtained by measuring from the intersection of the collarette seam and the shoulder seam (high point of shoulder) to the bottom edge of hem. I“ 2 Licensed by Information Handling ServicesY C edge of the sleeve from the intersection of the armhole seam and shoulder
12、seam to the bottom edge of the wristlet. The sleeve length is obtained by measuring along the outside folded D measuring between folded edges along the top edge. Refer to Figure 1. The collarette opening is obtained by positioning collarette flat and 2.3. Colors. The colors of the finished cloth sha
13、ll approximate the color chips referenced under the following color chip numbers in accordance with FED-STD-595: Shade Color Chip White Blue Green Yellow Brown Purple Red 37925 35095 14193 33655 30108 37100 . 31350 2.4 Labels. A comercial-type label is acceptable, provided that an additional printed
14、 cloth label containing the contractors name, contract number, size and National Stock Number (NSN) is caught on the stitching of the commercial label. The commercial label shall include fiber and laundering information. 2.5 Label/taq. Each item shall be individually bar-coded, The bar coding elemen
15、t shall be a 13 digit national stock number (NSN). The bar code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item. 2.6 Patterns. Government patterns
16、shall be furnish upon request. Commercial patterns shall be used. 2.7 Fiaure. Figure 1 is furnished for information purposes only. When inconsistencies exist between the written commercial item description and the figure, the written commercial item description shall govern. 3. REGULATORY REQUIREMEN
17、TS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4. QUALXTY ASSURANCE PROVISIONS 4.1 Product conformance. The products provided shall meet the salient characteristic
18、s of this commercial item description, conform to the producers own standards and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 3 Licensed by Information Handling ServicesA-A-550
19、68A 9999974 OlI7315lJ 399 A-A-55068A 4.2 Warranty. The item offered shall include the standard warranty given to the commercial market beginning with the date of delivery of the individual items. 4.3 Visual examination. Each jersey shall be examined for the following defects: stain (outside); raw ed
20、ges, open seams, thread ends not removed, or loose tension resulting in loose seams; any material defects, distorted parts or poor workmanship; color not as specified; any component part omitted; label missing, incorrect, or illegible; measurement of item not as specified; bar code omitted or not re
21、adable,by scanner; human- readable interpretation (HRI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or purchase order. Any hole, cut, or tear; any part shaded; any spot or 5. Preservat
22、ion, packing, and marking. The preservation, packing, and marking shall be as specified in the contract or order. 6. NOTES 6.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue, Bldg. 4D Phila
23、delphia, PA 19111-5094 . FED-STD-595B (Applications to order color chips should be addressed to GSA Federal Supply Service Bureau, Specification Section, 470 E LEnfant Plaza, S.W., Suite 8100, Washington, DC 20707.) 6.2 Source of non-Government documents ASTM Test Methods (Applications for copies sh
24、ould be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) AATCC Test Method (Applications for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Triangle Park, NC 27709-2215.) MILITARY I
25、NTERESTS: Custodians Navy - NU Review Activities Navy - AS, SH CG - CT CIVIL AGENCY COORDINATING ACTIVITY : GSA - FSS PREPARING ACTIVITY: DLA - CT Project 8415-0077 4 Licensed by Information Handling ServicesA-A-550bA = 9999974 0173152 225 A-A-55068A 1 : . i . - -. * L J I- .BACK VIEW BACK EJD .view FIGURE 1- JERSEY, FLIGHT DECK CREWXAN 5 Licensed by Information Handling Services
