1、A-A-552 13 November 2, 1993 COMMERCIAL ITEM DESCRIPTION GLOVES, PERMEABLE, CLOTH, COTTON, OLIVE GREEN The General Services Administration has authorized the use of this commercial item description in preference to MIL-G-1057. Abstract. This document covers a dyed cotton glove for use to protect the
2、hands and wrists from vesicants. The glove shall be a full inseamed, slip-on, seamless palm, Gunn style glove. The seam at the base of the fingers shall be provided with a reinforcement welt turned up to cover the stitching. long knitted wristlet is inseam sewn to top of the hand portion of the glov
3、e. Unless the gloves are impregnated with an antivesicant material no protection will be provided. Salient characteristics. sizes Small, Medium and Large. The fabric for the hand portion and welt shall be dyed, cotton, plain (jersey) knit. The fabric shall be napped (fleeced) on the back and be able
4、 to meet the following physical requirements. A The glove shall be of one class in I Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Direc
5、torate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimit
6、ed. a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-O Characteristic Test Method Requirement ? Ounces per yard (minimum) ASTM D3776-Opt C 10.5 Wales per inch (minimum) FED-STD-191 19 Courses per inch (minimum) FED-STD-191 22 Bursting strength, poun
7、ds (minimum) ASTM D3787 75 5070 5070 The fabric for the cuff shall be a 1 by 1 rib knit, seamless, dyed, cotton tubing. The tubing shall meet the following physical requirements. Characteristic Test Method Requirement Yards per pound: ASTM D3776-Opt C Minimum 8.0 Maximum 12.0 Wales per inch (Minimum
8、) FED-STD-191 16.0 Courses per inch (Minimum) FED-STD-191 20.0 Flat width, inches (Minimum) FED-STD-191 3 5070 5070 5020 The thread for seaming and stitching shall be cotton, type I, 30/3 ply, in accordance with A-A-52094, dyed to approximate the basic fabric. Seams and stitchinq A lockstitch or cha
9、institch shall be used to join finger pieces to palm with inserted 1/2 inch welt and inseam, with one row of stitching 1/8 to 3/16 inch from cut edge. The closing shall also be done with a lockstitch or chainstitch joining the front and back together with one row of stitches 1/8 to 3/16 inch from th
10、e cut edge. The cuff is to be attached using a chainstitch by joining the cut ends of the double thickness wrist tubing to hand inseaming with one row of stitching 3/16 to 1/4 inch from cut edge completely around and continuing the stitching by at least 1 inch beyond the beginning and leaving 1/2 to
11、 3/4 inch chain at point of run-off. Ends of closing stitches of hand wrist shall be caught in cuff stitching. There shall be 10 - 14 stitches per inch. Sizes and measurements. shall conform to the following: The measurements of the finished glove 2 Provided by IHSNot for ResaleNo reproduction or ne
12、tworking permitted without license from IHS-,-,-A-A-55213 W 9999974 015b293 bT4 A-A-55 2 13 Fig. 1 Tolerance refer- Measurements (inches) plus or minus ence S M L Total length A 16-314 17-114 17-314 112 Hand width B 4-118 4-318 4-518 114 Hand length C 10 10-1/4 10-112 114 Cuff width D 3-114 3-114 3-
13、114 114 Cuff length E 6-314 7 7-114 114 Thumb length F 2-112 2-314 3 114 length G 3-114 3-112 3-314 114 Middle finger NOTE: The measurements shall be made with the glove laid out flat under no tension. Color. The color of the knitted fabrics shall be Olive Green 109 (standard sample is available). T
14、he use of sulfur dyes and dyes containing elementary sulfur or compounds capable of oxidation to sulfuric acid is prohibited. The dyed fabrics shall show no more labile sulfur than shown by the standard sample, when tested as specified in FED-STD-191 method 2020. Matchinq. The color of the finished
15、cloth shall match the standard sample when viewed under filtered tungsten lamps that approximate artificial daylight and that have a correlated color temperature of 7500 +. 200 K, with illumination of 100 Rules and Regulations Under The Textile Fiber Products Identification Act (Applications for cop
16、ies should be addressed to Federal Trade Commission, Washington, DC 20580) AATCC 61 - Colorfastness to Laundering, Home, and Commercial: Accelerated AATCC 8 - Colorfastness to Crocking: AATCC Crocheter Method AATCC 15 - Colorfastness to Perspiration * m. The pH of the water extracted from the finish
17、ed fabric shall be not less than 5.0 and not more than 7.0 when tested as specified in ASTM D2165. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Non-fibrous material. The starch and protein content including a chloroform-soluble and water-soluble
18、 material in the finished fabric shall not exceed 3.0 percent when tested as specified in FED-STD-191 method 2611. Label/markinq. Each glove shall be marked with a combination identification and size label by direct printing, stamping or stenciling. The marking medium shall be an approved black ink.
19、 The legend and size of characters shall be as follows: Leaend Minimum size of characters Gloves, Permeable, Cloth, Cotton, Olive Green 3/8 inch Not Impregnated 3/8 inch Contract No. 3/8 inch Stock No. 3/8 inch Size - SMALL, MEDIUM or LARGE L/ 3/4 inch L/ As an alternate, size may be marked S, M, or
20、 L. The marking shall also include the information required by the applicable products labeling act. The marking shall show good fastness to laundering when tested in accordance with AATCC No. 61 Test IVA. Label/taq. Each item shall be individually bar-coded with the type VIII, class 17 label/tag of
21、 DDD-L-20. This label/tag shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and causes no damage to the item. Patterns. The government shall furnish a single size pattern. The contractor is responsible for grading patterns for additional siz
22、es. The pattern generally provides for a seam allowance of 1/8 inch for joining seams. Commercial patterns may be used in lieu of the government furnished pattern provided they conform to the cited design and finished measurements. WorkmanshiD. The finished gloves shall conform to the quality of pro
23、duct established by this document. shall not exceed the contractors own quality assurance standards and the quality assurance standards defined by the technical data in the bid package. The occurrence of defects . Product demonstration model. When required, offerers shall submit samples of their int
24、ended production. The product demonstration model will consist of units independently developed. Product demonstration models will be analyzed and 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55213 W 9999974 0356295 477 A-A-552 13 0 evaluate
25、d by the Government. Evaluation criteria and basis for award are contained in the solicitation. Product demonstration models will be retained by the Government, One (1) product demonstration model approved by DPSC under the resultant contract will serve as a manufacturing standard for the correspond
26、ing production items delivered under this contract. Offerers are advised that the product demonstration model does not relieve the successful offerer of his responsibility to perform in accordance with the commercial item description specified above. Resulatorv reauirements. The offeror/contractor i
27、s encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. Quality assurance Certification. The contractor shall certify that the product offered meets the salient characteristics and other requirements of this description and that the product con
28、forms to the producers own drawings, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contrac
29、tor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. 0 Examination Visual examination. The lot shall be examined for the defects listed b
30、elow. The lot size shall be expressed in units of gloves. The sample unit is one glove and the selection shall be by pairs, Defects. The gloves shall be examined for the following defects: Defect Classification Major Minor Any hole, cut, tear Run or drop stitch, end out Needle chew Abrasion marks Kn
31、ots, slubs, burrs Open seams Wrong type stitch Pairing (not properly mated) Color not as specified Any spot or stain (outside) Label missing, incorrect, or e Thread ends not removed illegible X X X X X X X X X X X X 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
32、se from IHS-,-,-A-A-55213 m 9999974 0356296 303 m A-A-5 5 2 13 Bar code defects. human-readable interpretation (HRI) omitted or illegible; not visible on folded, packaged item; causes damage to the item. Bar code omitted or not readable by scanner; Dimensional examination. The finished gloves shall
33、conform to the dimensions specified. Any dimension that is not within the established tolerance shall be classified as a defect. The sample unit shall be one glove. Packaaina examination. shall be examined in accordance with defects listed below. The lot size shall be the number of shipping containe
34、rs in the inspection lot. The fully packaged shipping containers EXAMINE DEFECT Marking Omitted; incorrect; illegible; (exterior and interior) of improper size, location, or method of application Materials Workmanship Content Palletization Any component missing, damaged, or not as specified Inadequa
35、te application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling Number of items in container is more or less than required NSN shown on one or more items not as specified on shipping container Length, width, or height exceeds spe
36、cified maximum requirements Pallet type not as specified Load not bonded as specified Preservation, packinu. and markinq. The preservation, packing, and marking shall be as specified in the contract or order. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
37、 IHS-,-,-A-A-55213 m 9999974 O356297 24T m A-A-552 13 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Sources of non-Government documents ASTM Test Methods (Appli
38、cations for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) AATCC Test Methods (Applications for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Triangle Park, NC 2
39、7709-2215) Custodians: AFNY - GL NAVY - NU AIR FORCE - 99 Review Activities: ARMY-MD AIR FORCE - 45, 82 User Activities: Civil Agency Coordinating Activity : GSA - FSS Preparing Activity: DLA - CT Project No. 8415-0927 NAVY - MC, YD 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55213 m 999c?774 0156298 186 m A-A-55213 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
