1、A-A-55231 = 999997LI 0355342 32b A-A-55 231 September 1, 1993 COMMERCIAL ITEM DESCRIPTION CASE, HANDCUFFS, LEATHER, BLACK The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-C-40121. Abstract. The leather handcuff case herein described
2、has a snap flap and affixes to a waist belt. It is intended for use by military law enforcement personnel, and designed for stowing military issue handcuffs. Classification. The case, handcuffs, black shall be provided in one type and size. Salient Characteristics. The handcuff case shall be of two
3、piece leather pocket construction capable of belt attachment, and have an overlapping flap equipped with a snap closure. The main body of the pocket shall form the back portion and continue into the overlapping flap. The bottom of the case shall be curved. The sewn-on pocket portion shall be molded
4、to the back portion, creating a cavity for handcuff insertion, excluding leather sidewalls, of a minimum of 5/8 inch. The case, including flap, shall be shaped as indicated in Figure 1. Stitched double edges of body, flap edge and pocket piece, when sewed together shall be sealed with a colorless aq
5、ueous solution similar to gun tragacanth and smoothly burnished. When in a closed configuration, the outside dimensions of the case shall measure 3-3/4 +1/8 inches in width across the top, and The Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use
6、in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this documen
7、t or by letter. AMSC N/A FSC 8465 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5523L 9999974 0355343 Ob2 A-A-55 2 3 1 5-1/2 2 1/8 inches in length, from top to b
8、ottom. The curvature of the pocket facing, bottom portion, shall be made to a fully curved 1-3/8 inch radius, concentrically sewn to the body, bottom portion. Stitching around body shall be 3/16 inches from edge, All stitching shall be lock-stitch, 4-6 stitches per inch. The main body, back portion,
9、 shall be perforated with two slots, centered, 1/8 inch wide, 2-3/8 inches long, and 1-1/2 inches apart. Ma ter ia 1 Leather: The leather shall conform to any type, class 1 of KK-L-271 and shall be dyed and finished smoothly on the grain side. The leather shall be black in color, insuring a long- la
10、sting lustrous finish. The finished grain side shall be used for all visible facings. Thread, polyester: Twisted multiple (3 minimum) cord soft finish thread at 1700 yards per pound (minimum) or bonded finish thread at 1500 yards per pound (minimum) with either offering a minimum of 24 pounds breaki
11、ng strength may be used. The color of the thread shall be black and exhibit colorfastness to weathering in compliance with good commercial practice. Ends of stitching shall be backstitched or over-stitched not less than 1 inch, except where ends are turned under, or caught in other seams and stitchi
12、ng. Fastener, snap: Snap fasteners shall be steel with black finish consisting of a size 2 button with socket for the female half and a size 2 eyelet with stud for the male half. The button/ socket assembly shall be the characteristic spring clamp type. Label/Taq. Each item shall be individually bar
13、-coded with the type VIII, class 17 label/tag of DDD-L-20. This label/tag shall be located so that it is completely visible on each item and causes no damage to the item. Defects. Bar-code omitted or not readable by scanner, Human- Readable Interpretation (HRI) omitted or illegible. Bar-coded type n
14、ot as specified, code density not as specified. Sizes and Measurements. The finished case shall conform to the dimensions indicated in the above description, and Figure 1. Workmanship. The case shall be clean and free from grease and dirt. Leather components shall be free from any cut, damaged grain
15、, scratch, hole, brand, hip mark and loose spongy leather. Burnished edges shall be smooth and free from roughness. Thread tension shall be maintained so that there will be no loose stitching. All thread ends shall be tied and fused. Provided by IHSNot for ResaleNo reproduction or networking permitt
16、ed without license from IHS-,-,-A-A-55231 = 9999974 0155344 TT9 A-A- 5 5 2 3 1 Thread tension shall be uniformly secure, with thread ends tied and fused. Improperly seated, clinched or malfunctioning snap fasteners shall render case unacceptable. The finished case shall be thoroughly cleaned with al
17、l loose thread, lint, and other debris removed. Product Demonstration Model. When required, offerers shall submit samples of their intended production. The Product Demonstration Model will consist of units independently developed. Product Demonstration Models will be analyzed and evaluated by the go
18、vernment. Evaluation criteria and basis for award are contained in the solicitation. Product Demonstration Models will be retained by the government. One (1) Product Demonstration Model approved by DPSC under the resultant contract will serve as a manufacturing standard for the corresponding product
19、ion items delivered under this contract. Offerers are advised that the Product Demonstration Model does not relieve the successful offerer of his responsibility to perform in accordance with the Commercial Item Description specified above. Reaulatorv Reuuirements. The offeror/contractor is encourage
20、d to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. Quality Assurance Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producers own drawing
21、s, specifications, standards and quality assurance practices. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for, under the provisions of the contract. Examination. The lots of handcuff cases shall be ins
22、pected in accordance with “Sampling Procedures and Tables for Inspection by Attributes“, ANSI/ASQC 21.4, published by the American Society for Quality Control. Visual Examination. The inspection level for visual examination shall be II and the AQL 2.5 for visual defects. The sample unit is one handc
23、uff case. Dimensional Examination. The finished case shall conform to the dimensions specified. Any dimension that is not within the established tolerance shall be classified as a defect. The sample unit shall be one case; the inspection level shall be S-3 and the AQL shall be 2.5. 3 Provided by IHS
24、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55231 m.7777974 0355345 735 A-A- 5 5 2 3 1 Packaqinq Examination. The fully packaged shipping containers shall be examined in accordance with defects listed below. The lot size shall be the number of shipping cont
25、ainers in the inspection lot. The inspection level shall be S-3 and AQL, expressed in terms of defects per hundred units, shall be 2.5. EXAMINE DEFECT Marking Omitted; incorrect; illegible; (exterior and interior) of improper size, location, or method of application Materials Workmanship Content Pal
26、letization Any component missing, damaged, or not as specified Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling Number of items in container is more or less than required NSN shown on one or more items not
27、as specified on shipping con ta iner Length, width, or height exceeds specified maximum requirements Pallet type not as specified Load not bonded as specified Defects. The finished case shall be examined for the following defects : Body: any hole, cut, tear, color not as specified; any spot or stain
28、 (outside); thread ends not removed; failure to clean, remove lint or other foreign matter, measurement of item not as specified. Any component, assembly, finish or workmanship feature not in compliance with applicable requirements of this Commercial Item description. 4 Provided by IHSNot for Resale
29、No reproduction or networking permitted without license from IHS-,-,-A-A-55231 = 9999974 0355346 871 A-A-55 2 3 1 Leather: evidence of loose flesh, slaughter cuts, abrasions or scratches, holes, hip marks, grub damage, brand marks, wrinkles, flanky, spongy, pipey or stretchy leather; not dyed and fi
30、nished on grain side; not black in color; improper or incomplete burnishing of matched edges. Thread/Stitching: not type specified, or less than 4 stitches per inch.; loose thread tension; failure to tie and fuse thread ends. Hardware: Snap fasteners not as specified; improperly mated, clinched or s
31、eated; any other malfunction adversely affecting ease of operation. Preservation. Packina, and Markinq. The preservation, packing, and marking shall be as specified in the contract or order. Source of Government Documents. Copies of Military and Federal documents are available from: Standardization
32、Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Sources of Nonqovernment Documents. ANSI/ASQC 21.4 - Sampling Procedures and Tables For Inspection By Attributes National Standards Institute, 1430 Broadway, New York, NY 10018- (Applications for copies should be addressed
33、to American 3308. ) Custodians: Navy - NU Army - GL User Activity: Navy - MC Civil Agency Coordinating Activity GSA-FSS Preparing Activity DLA-CT Project No. 8465-0105 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55231 9999974 0155347 708 = NOTE: be riimimiirii o 5/8 iiich. int:errial cavity ciimtmsion for insertion of handcuff shall Fr;URE 1. CASE, HANiICUFFS, LEATHER, BLACK 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
