1、A-A-55290 = 9999974 O169742 317 - Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FNSC, 2800 South 20th Street, Philadelphi
2、a, PA 19145-5099. I INCH-POUND I December 12. 1995 A-A-55290 COMMERCIAL ITEM DESCRIPTION SWEAT PANTS The General Services Administration has authorized the use of this commercial item description as a replacement for BBB-S-1269 for all Federal agencies. 1. SCOPE. 1.1 ScoDe. This commercial item desc
3、ription covers the requirements for a knitted, cotton blended, fleeced sweat pants for use by personnel of Government agencies. 2. CLASSIFICATION. The sweat shirt shall be fmished in the following classes and sizes: Class 1 - White (bleached) Class 2 - Silver gray Class 3 - Nickel gray Schedule of s
4、izes Small Large Medium Extra large AMSC NIA FSC 84 15 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 5290 3. SALENT CHARACTERISTICS 3.1 Description. The sweat p
5、ants shall have a ribbed knit or elastic waist and drawcord. The waist shall have a drawcord. The sweat pants shall have elastic leg bottoms, and the seams shall be coverstitched. 3.2 Material. 3.2.1 Basic material. The basic material shall be a blend of cotton and polyester, having a minimum of 50
6、percent cotton and the remainder polyester. The material shall be a jersey knit with fleece backing, weighing a minimum 6.75 ounces per square yard when tested in accordance with ASTM D-3776, Option C. The dyed, knitted cloth shall have a minimum rating of 4 when.tested for colorfastness to launderi
7、ng (after 3 wash and dry cycles) in accordance with AATCC 61-Test 3A. The knitted cloth shall have a minimum rating of 4 when tested for colorfastness to perspiration in accordance with AATCC 15. The test for colorfastness to alkaline solution shall apply. The cloth shall meet the Flammable Fabrics
8、Act as required by law. No flame-retardant finish shall be permitted. 3.2.1.1 Shade matching. The color and appearance of the cloth shall match the standard sample when viewed under filtered tungsten lamps that approximate artificial daylight and that have a correlated color temperature of 7500 5 20
9、0K, with illumination of 1 O0 5 20 foot candles and shall be a good match to the standard sample under incandescent lamplight at 2300 2 200K. 3.2.2 Knit trim. The 1x1 inch rib knit trim for the waistband, shall be approximately 4-112 inches wide and of double thickness. The color shall be closely ma
10、tched to the appropriate basic cloth color. The same tests used for testing the color fastness of the basic cloth shall apply. 3.2.3 Elastic. The optional waist elastic shall be of a sufficient width to be enclosed in the 1-1/2 inch wide waist and appropriate for the purpose intended. The elastic fo
11、r the leg bottoms shall be a sufficient width to be enclosed in a 1 inch wide bottom hem. 3.2.4 m. The waist tie cord shall be tubular, braided or knitted, and appropriate for the purpose intended. The ends of the cord shall be knotted. The color of the cord shall be bleached white. 3.2.3 Thread. Th
12、e thread shall be cotton, match the color of the knitted cloth, and shall show good colorfastness to perspiration and laundering. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55290 9999974 OLb9744 19T Fig. 1 Small Medium Large X-Large Tolera
13、nce Waist 11 A 13 14 15 16 - + 112 Seatwidth- B 21-112 22-112 23-112 24 - 112 + 1 Thigh width 31 C 9 10 11 12 - + 112 Length d/ D 41 43 45 47 - +1 Rise 51 E 17 17-112 18 18-112 + 112 Waistband F 4-114 4-1/4 4-1/4 4-114 i114 A-A-5 5290 3.3 Labels. Each sweat pant shall have a commercial-type identifi
14、cation and size label attached to the center back below or caught into the waistband seam, on the inside. The label shall contain laundering instructions (according to the manufacturers recommendations). 3.4 Labeltag. Each item shall be individually bar-coded with a paper tag for personal clothing i
15、tems. The paper tag shall be standard bleached sulfate having a basis weight of 100 pounds. The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The tags shall have a hole and shall be attached to each item by a fastener, clearly legible and readable
16、 by a scanner. The bar coding element shall be a 13 digit national stock number (NSN). The bar code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item
17、. 3.5 Figure. Figure 1 is furnished for information purposes only. To the extent of any inconsistencies between the written commercial item description and the figure, the written commercial item description shall govern. 3.6 Measurements. The finished sweat pants shall conform to the following meas
18、urements: Measurements in inches 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55290 W 9999974 OLb9345 02b W A-A-5 5290 4. REGULATORY REOIREMENTS. The offer0rcontractor is encouraged to use recovered mat uneven, ridgy cloth, or fleeced cloth
19、 not well napped on inside; any thin areas; slubby yarns more than normally visible on outside of shirt; color or shade not as specified; any spot or stain; any rancid odors; any component part missing or defective; any seams twisted, puckered, or pulled, affecting appearance; any part of garment ca
20、ught in any unrelated part or stitching; any needle chews; tight or loose tension affecting appearance; any thread ends not cut; label missing, incorrect, or illegible; measurement of item not as specified; bar code omitted or not readable by scanner; human-readable interpretation 0 omitted or illeg
21、ible; bar code not visible on folded, packaged item; bar code causes damage to the item; any requirement not as specified; any items not packaged in accordance with the contract or purchase order. 5.4 AcceDtance criteria. Acceptance criteria shall be as specified in the contract or purchase order. 6
22、. PACKAGING 6.1 Preservation. uacking. and marking. The preservation, packing, and marking shall be as specified in the contract or purchase order. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. A-A-55290 = 9999774 0367746 Tb2 W A-A-55290 7. NOT
23、ES 7.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 191 11-5094 7.2 Source of non-Government documents ASTM Test Methods (Applications for copies should be addressed to A
24、merican Society for Testing and AATCC Test Methods Materials (ASTM), 1 O0 Barr Harbor Drive, West Conshohocken, PA 19428-2959.) (Applications for copies should be addressed to Amerkan Association of Textile ANSUASQC Z1.4 - Sampling Procedures and Table for (Applications for copies should be addresse
25、d to American National Standards Chemists and Colorists (AATCC), P. O. Box 122 15, Triangle Park, NC 27709-22 15 .) Inspection of Attributes Institute, 1 1 West 42nd Street, New York, NY 10036-8002.) Rules and Regulations Under the Flammable Fabrics Act (Applications for copies should be addressed t
26、o the Federal Trade Commission, Washington, DC 20580.) MILITARY INTERESTS: Custodians: Army - GL Navy - SA Review Activities: CIVIL AGENCY COORDINATING ACTMTY: GSA - FSS PREPARING ACTMTY: DLA - CT (Project 841 5-0042) Army-MD Navy - NU, MC 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-m 9999974 0354399 339 m A-A-5 52 9 O FIGURE 1. Sweat Pants 6 .) .i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
