1、A-A-55515 15 March 1994 COMMERCIAL ITEM DESCRIPTION CONNECTORS, ELECTRICAL, IEEE 488 COMPATIBLE, RECTANGULAR, MINIATURE, POLARIZED SHELL, PLUG AND RECEPTACLE, SNAP ON COVERS, HARDWARE KIT The General Services Administration has authorized the use of this commercial item description (CID). Abstract.
2、back plug and receptacle, electrical diyital interface bus connector set. This connector hardware can be used in applications that require connectors which conform to the IEEE 488 interface standard. Connector hardware covered by this CID is intended for commercial/industrial applications and may be
3、 used in military systems where individual environmental and performance requirements can be met. Part or Idevtifyinq Nuniber (PIN). The PIN for the CID shall be as shown in the following example: This CID covers the general requirements for a snap on cover kit for a polarized shell, back to A-A-555
4、15 - o1 I I I l LA CID number Dash number Salient characteristics. Design, construction, and dimensions. Design, construction, and dimensions shall be as specified on figure 1 and shall be compatible with connector specified in A-A-55148. Connector hardware materials. The cover shell shall be of bla
5、ck thermoplastic material. Operating temperature. The operating temperature range shall be from -40C to +75C. Vibration. The hardware when assembled and locked to mating connectors, shall exhibit no evidence of breaking, cracking, or loosening of parts when subjected to vibration of 10-55-10 Hz trav
6、ersed in 1 minute at 1.52 mm (.O60 inch) total excursion for 2 hours in each of three mutually perpendicular planes. Physical shock. The hardware when assembled and locked to mating connectors, shall exhibit no evidence of breaking, cracking, or loosening of parts when subjected to 50 Gs half-sine w
7、ave shock of 11 milliseconds duration, 3 shocks in each direction applied along the three mutually perpendicular planes for a total of 18 shocks. Regulatory requirements. Quality assurance provisions. This section is not applicable to this CID. Responsibility for inspection. Unless otherwise specifi
8、ed in the contract or purchase order, the contractor is responsible for the performance of all inspection, examination, and test requirements specified herein. his own or any other facilities suitable for the inspection requirements specified herein, unless disapproved by the Government. examination
9、s, or tests set forth in this description where such inspections, examinations, and tests are deemed necessary to assure supplies and services conform to prescribed requirements. Except as otherwise specified in the contract or purchase order, the contractor may use The Government reserves the right
10、 to perform any of the inspections, Contractor certification statement. The contractor shall certify and maintain objective quality evidence that the product offered meets the requirements of this CID, and that the product conforms to the producers own drawings, specifications, standards, quality as
11、surances practices, and is the same as the product provided as a bid sample. the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Government reserves the right to require proof of such conformance prior to AMSC N/A DISTRIBUTION STATEMENT A. App
12、roved for public release; distribution is unlimited. FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55515 = 9999974 OLb3207 264 H A-A-55515 n“l I I NOTES: 1. Dimensions are in millimeters. 2. Inches are in parentheses. 3. This item was
13、designed using inch-pound units of measurement. between the metric and inch-pound units, the inch-pound units shall rule. In case of problems involving conflicts Figure 1. Connector, shell, plug, and receptacle. Certificate of compliance. A certificate of compliance shalt accompany all ccnnector har
14、dware supplied to this CID. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55515 CID PIN A-A-55515- o1 Packaqing. Preservation, packaqinq, packing, labelinq, and marking. Preservation, packaging, labeling, and marking shall be as specified in
15、the contract or purchase order. W. process of acquiring the item, but is not mandatory. This section contains relevant information which is useful to buyers, users, and suppliers in the Referenced document. Other Publication INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE) Vendor commercial
16、Vendor CAGE PIN number 554831-1 00779 IEEE 488 - IEEE Standard Digital Interface for Programmable Instrumentation. (Applications for copies should be addressed to the Institute of Electrical and Electronics Engineers (IEEE), IEEE Service Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-133
17、1.) Acquisition documents should specify the following: Ordering data. a. CID document number and revision and CID PIN. b. Quality assurance provisions. c. Packaging requirements. Comments. Comments on this CID should be directed to Defense Electronics Supply Center, 1507 Wilmington Pike, ATTN: DESC
18、EMT, Dayton, OH 45444-5000, or telephone (513) 296-5391. Source of supply. they become available. A suggested source of supply is listed in table I. Additional sources will be added as TABLE I. Suggested source of supply. Vendor CAGE number 00779 Vendor name and address AMP, Incorporated 470 Friendship Road Harr i sburg, PA 171 11 -1203 CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE PREPARING ACTIVITY: DLA-ES (Project 5935-0423) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
