1、A-A-55588 7777774 O365337 767 INCH-POUNDI A-A-55588 3 1 Oct 1994 SUPERSEDING MS27973B 21 Dec 1987 COMMERCIAL ITEM DESCRIPTION HINGE STRAP (OFFSET) The General Services Administration has authorized the use of this commercial item description for all Federal Agencies. Scone. This Commercial Item Desc
2、ription (CID) covers commercial and industrial quality, offset hinge strap suitable for use on wood and hollow core doors. Salient characteris tics. FAST PIN - VD-/ IB- Beneficial comments, recommendations, additions, deletions, clarifications, etc., and data which may improve this document should b
3、e sent to: Commander, U.S Army Armament Research, Development, and Engineering Center (ARDEC), A“: SMCAR-BAC-S, Picatinny Arsenal, NJ 07806-5000 AMSC NIA DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. FSC 5340 Provided by IHSNot for ResaleNo reproduction or network
4、ing permitted without license from IHS-,-,-A-A-55588 m 9999974 0365338 bT3 m A-A-55588 TABLE I. DASH NUMBERS AND DIMENSIONS - 1 1. Material: Body: Steel, in accordance with ASTM A506, low carbon, cold rolled. Pin: Brass in accordance with ASTM B36, UNS numbers C26000, C26800, C27200, C28000 all HO4
5、hard temper or ASTM B121 all specified UNS numbers with H4 hard temper or corrosion-resistant steel, ir accordance with ASTM A666. 2. Protective coating. Zinc plated in accordance with ASTM B633, Type II, Class Fe/Znl3. 3. Hardware. Hinges are furnished with wood screws. The sizes specified are thos
6、e normally furnished by the supplier. 4. Ail dimensions are in inches unless otherwise specified. 5. WorkmanshiD. The hinges furnished shall be free from imperfections which may impair durability or serviceability. Contractor certification. The contractor shall certify and maintain substantiating ev
7、idence that the product offered meets the salient characteristics of this commercial item description, and that the product conforms to the producers own drawings, specifications, standards, and quality asmance practices. Items with known defects shail not be submitted for government acceptance. The
8、 Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Packaging. Packaging shail be in accordance with ASTM D395 1. CID based art identification number. The following part iden
9、tification numbering procedure is for Government purposes and does not constitute a requirement for the contractor. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55588 W 99999Ll OLb5339 53T W Cancelled MS PIN MS27973 - * 21 A-A-55588 Replacemen
10、t CID P/N M5588-* 21 Examule: AA 55588 - 2 CID number Designates a CID Notes. a. Ordering data. Acqusition documents must specify the following: 1. Title, number, and date of this CID. 2. Arrangements for first article inspection or whether first article is not required. 3. Applicable level and pack
11、aging requirements. b. Cross-reference data. Butt hinges conforming to this CID are interchangeable/sustitute with butt hinges conforming to MS27973B dated 21 Dec 1987. TABLE II. CROSS - REFERENCE TABLE. c. Remilatory reauirements. The offeror/ contractor is encouraged to use recovered materials in
12、accordance with Public Law 94-580 to the maximum extent practical. custodian: hY-AR, Navy-YD Air Force-99 Review activities: Army-AV, ME Navy-MC, SH Air Force42 DLA-IS Preparing activity: Army-AR Agent: DLA-IS Project No. 5340-2183 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-